• 제목/요약/키워드: Hexagonal plate

검색결과 50건 처리시간 0.029초

수열법에 의한 $(Li,Al)MnO_{2}(OH)_{2}$:Co 화합물의 합성 (Hydrothermal synthesis of $(Li,Al)MnO_2(OH)_2$:Co compound)

  • 최종건;황완인;김판채
    • 한국결정성장학회지
    • /
    • 제11권4호
    • /
    • pp.154-159
    • /
    • 2001
  • (Li,Al)$MnO_2(OH)_2$:Co 화합물의 합성르 수열법에 의해 행하였다. 출발원료는 $MnO_2$, LiOH.$H_2$O, $Co_3O_4$, $Al(OH)_3$이 사용되었으며, 단일상의 (Li,Al)$MnO_2(OH)_2$:Co 화합물을 얻을 수 있는 최적의 합성조건은 다음과 같았다. 반응온도 : $200^{\circ}C$ 반응시간 ; 3일간, 반응장치 ; 시이소형, 수열용매 ; 3M-KOH, (Li,Al)$MnO_2(OH)_2$:Co 의 원자비 = 1:2.1:2.5~2:0.5~1. 수열합성된 단사의 (Li,Al)$MnO_2(OH)_2$:Co 화합물은 결정성이 우수하였으며, 청색안료로써 천연 오수에 필적하는 발색효과를 나타내었다. 합성된 (Li,Al)$MnO_2(OH)_2$:Co 화합물의 형태는 육각 판싱이였으며, 입자의 크기는 0.5~1 $\mu\textrm{m}$의 미립자이였다.

  • PDF

$CdS_{1-x}Se_{x}$ 광도전 박막의 전기-광학적 특성연구 (Study on the Electro-Optic Characteristics of $CdS_{1-x}Se_{x}$ Photoconductive Thin Films)

  • 양동익;신영진;임수영;박성문;최용대
    • 센서학회지
    • /
    • 제1권1호
    • /
    • pp.53-57
    • /
    • 1992
  • 본 연구는 $CdS_{1-x}Se_{x}$의 박막을 제작하고 그 전기-광학적인 특성을 조사한 것이다. 전자선 가열증착법을 이용하여 $CdS_{1-x}Se_{x}$을 알루미나 기판위에 $1.5{\times}10^{-7}$ torr의 압력, 4kV의 전압, 2.5 mA의 전류 그리고 기판온도를 $300^{\circ}C$로 유지하여 증착하였다. 증착된 $CdS_{1-x}Se_{x}$ 박막은 X-ray 회절 실험을 통하여 볼 때, 육방정계의 결정구조를 가지며 성장되었다. $CdS_{1-x}Se_{x}$ 도전막은 특정분위기에서 $550^{\circ}C$, 30분간 열처리함으로써 높은 광전도성을 나타내게 되었다. 또한 Hall 효과, 광전류 스펙트럼, 감도, 최대 허용 전력과 응답시간 등을 조사하였다.

  • PDF

침상형 5Mg(OH)2·MgSO4·3H2O 형성에 관한 MgO와 NH4OH 영향 (Effect of MgO and NH4OH on Formation of 5Mg(OH)2·MgSO4·3H2O Whiskers)

  • 유리;피재환;김형태;김경자;김영웅;김웅;김유진
    • 한국분말재료학회지
    • /
    • 제18권3호
    • /
    • pp.283-289
    • /
    • 2011
  • Magnesium hydroxide sulfate hydrate whiskers ($5Mg(OH)_2{\cdot}MgSO_4{\cdot}3H_2O$, abbreviated 513 MHSH) were prepared using hydrothermal reaction with magnesium oxide (MgO) and magnesium sulfate ($MgSO_4{\cdot}7H_2O$) as the starting materials. The effects of the molar ratio of $MgSO_4$/MgO and amount of $NH_4OH$ were studied. As a result, 513 MHSH whiskers co-existed with hexagonal plate $Mg(OH)_2$ at low concentration of $SO_4^{2-}$. The molar ratio of $MgSO_4{\cdot}7H_2O$/MgO was 7:1, uniform 513 MHSH whiskers were formed without impurity such as $Mg(OH)_2$. Appropriate amount of $NH_4OH$ has affected to formation of high quality MHSH. Their morphologies and structures were determined by powder X-ray diffraction (XRD) scanning electron microscopy (SEM) and thermo-gravimetric analyzer (TGA).

Synthesis of Barium Ferrite Powder by the Coprecipitation Method using Iron Pickling Waste Acid

  • Youngjae Shim;Kim, Dong-Whan;Kim, Guk-Tae
    • 한국세라믹학회지
    • /
    • 제38권5호
    • /
    • pp.401-404
    • /
    • 2001
  • Barium ferrite powders were synthesized by the coprecipitation method using iron-pickling waste acid (IPWA) and BaCl$_2$$.$2H$_2$O as raw materials. Fe$\^$2+/ ions in the IPWA, which contains both Fe$\^$2+/ and Fe$\^$3+/ ions, were oxidized into Fe$\^$3+/ ions using H$_2$O$_2$. Proper amount of BaCl$_2$$.$2H$_2$O was dissolved into the oxidized IPWA. Using NaOH, Ba$\^$2+/ and Fe$\^$3+/ ions were coprecipitated as Ba(OH)$_2$and Fe(OH)$_3$. The coprecipitated Ba(OH)$_2$and Fe(OH)$_3$were washed and dried. Barium ferrite powders were obtained by calcining the dried Ba(OH)$_2$and Fe(OH)$_3$mixture from 400$\^{C}$ to 1000$\^{C}$ with a 100$\^{C}$ interval. Barium ferrite powders were characterized by X-ray diffraction, SEM, and VSM. It was found that barium ferrite powders could be synthesized at around 630$\^{C}$. The synthesized barium ferrite powders showed hexagonal plate shapes with a fairly uniform size. The barium ferrite powder calcined at 900$\^{C}$ showed good magnetic properties, saturation magnetization of 67emu/g and maximum coercivity of 5000 Oe.

  • PDF

수종사(水鍾寺) 석조(石造) 부도내(浮屠內) 금동제구층탑(金銅製九層塔)(보물(寶物) 제(第)259-2호(號))의 비파괴(非破壞) 분석조사(分析調査) (Nondestructive Analysis on Miniature Pagoda of Sarira Reliquary (Treasure No. 259-2) from Sujong-sa Temple)

  • 권혁남;유혜선;강형태
    • 박물관보존과학
    • /
    • 제4권
    • /
    • pp.57-61
    • /
    • 2003
  • 경기도 양평에 위치한 수종사의 부도에서 고려시대 청자유개호와 금동제구층탑, 은제도금육각감 등이 발견되었다. 이들 중 금동제구층탑은 표면의 많은 부분이 구리 빛을 띄고 있고 기단부에 국부적으로 청동부식물이 관찰되므로 금동제로 알려져 있으며 문화재청에 등록된 공식 명칭 역시 '금동제'로 되어 있다. 그러나 표면 빛깔, 표면 상태, 청동부식물의 발생 정도 및 풍탁을 연결한 금속사 등 여러 측면에서 금제로 판단되어 과학적인 조사를 통하여 재질은 밝혀낼 필요성이 제시되었다. 이에 비파괴적인 방법으로 조사하였으며 그 결과 표면의 여러부분에서 가공 흔적이 관찰되고 도금의 흔적은 찾아볼 수 없었다. 또한 XRF 분석 결과 금과 은(16%)이 주성분을 이루고 불순물로 구리, 철 등이 포함되어 있어 금제로 판단되었다.

HWE 방법에 의한 CdS 박막의 성장과 광전도 특성 (Growth of CdS thin film using hot wall epitaxy method and their photoconductive characteristics)

  • 홍광준
    • 한국결정성장학회지
    • /
    • 제6권3호
    • /
    • pp.341-350
    • /
    • 1996
  • HWE 방법으로 CdS 박막을 quartz plate 위에 성장하였다. CdS 박막을 성장할 때 증발원과 기판의 온도를 각각 $590^{\circ}C$, $400^{\circ}C$로 하였고 성장된 두께는 $2.5\;\mu\textrm{m}$였다. 성장된 CdS 박막의 X-선 회절 무늬로부터 외삽법에 의해 구한 a와 c는 각각 $4.137\;{\AA}$$6.713\;{\AA}$인 육방정계임을 알았다. Van der Pauw 방법으로 Hall 효과를 측정하여 운반자 농도와 이동도의 온도 의존성을 연구하였다. 이동도는 30 K에서 200 K까지는 piezoelectric 산란에 기인하고, 200 K에서 293 K까지는 polar optical 산란에 의하여 감소하였다. 광전도 셀의 특성으로 spectral response, 최대 허용 소비전력 (MAPD), 광전류와 암전류비 (pc/dc), 및 응답시간을 측정하였다. Cu 증기 분위기에서 열처리한 광전도 셀의 경우 ${\gamma}=0.99,\;pc/dc=9.42{\times}10^{6}$, MAPD : 318 mW, rise time 10 ms, decay time 9 ms로 가장 좋은 광전도 특성을 얻었다.

  • PDF

$Ni_3Al$과 TiAl 중에 석출한 탄화물의 미세구조와 형태 (Microstructure and Morphology of Carbide Precipitates in $Ni_3Al$ and TiAl)

  • 한창석;구경완;김장우
    • 열처리공학회지
    • /
    • 제19권1호
    • /
    • pp.10-19
    • /
    • 2006
  • Microstructure and morphology of precipitates in $Ni_3Al$- and TiAl-based intermetallics containing carbon have been investigated in terms of transmission electron microscopy(TEM). In an $L1_2$-ordered $Ni_3Al$ alloy with 4 mol.% of chromium and 0.2~3.0 mol.% of carbon, fine octahedral precipitates of $M_{23}C_6$ type carbide were formed in the matrix by aging at temperatures around 973 K after solution annealing at 1423 K. TEM examination revealed that the $M_{23}C_6$ phase and the matrix lattices have a cube-cube orientation relationship and keep partial atomic matching at the {111} interface. After prolonged aging or by aging at higher temperatures, the $M_{23}C_6$ precipitates then adopt a rod-like morphology elongated parallel to the <100> directions. In the $L1_0$-ordered TiAl containing 0.1~2.0 mol.% carbon, TEM observations revealed that needle-like precipitates, which lie only in one direction parallel to the [001] axis of the $L1_0$ matrix, appear in the matrix and preferentially at dislocations. Selected area electron diffraction(SAED) patterns analyses have shown that the needle-shaped precipitate is $Ti_3AlC$ of perovskite type. The orientation relationship between the $Ti_3AlC$ and the $L1_0$ matrix is found to be $(001)_{Ti3AlC}//(001)_{L10\;matrix}$ and $[010]_{Ti3AlC}//[010]_{L10\;matrix}$. By aging at higher temperatures or for longer period at 1073 K, plate-like precipitates of $Ti_2AlC$ with a hexagonal structure are formed on the {111} planes of the $L1_0$ matrix. The orientation relationship between the $Ti_2AlC$ and the $L1_0$ matrix is $(0001)_{Ti2AlC}//(111)_{L10\;matrix}$ and $_{Ti2AlC}//_{L10\;matrix}$.

The Effect of Carbide Precipitation on the High Temperature Deformation of Ni3Al and TiAl

  • Han, Chang-Suk;Kim, Jang-Woo;Kim, Young-Woo
    • 대한금속재료학회지
    • /
    • 제47권3호
    • /
    • pp.147-154
    • /
    • 2009
  • The effect of carbon addition on the microstructures and mechanical properties of $Ni_3Al$ and TiAl intermetallic alloys have been characterized. It is shown that carbon is not only an efficient solid solution strengthener in $Ni_3Al$ and TiAl, it is also an efficient precipitation strengthener by fine dispersion of carbide. Transmission electron microscope investigation has been performed on the particle-dislocation interactions in $Ni_3Al$ and TiAl intermetallics containing various types of fine precipitates. In an $L1_2$-ordered $Ni_3Al$ alloy with 4 mol.% of chromium and 0.2~3.0 mol.% of carbon, fine octahedral precipitates of $M_{23}C_6$ type carbide, which has the cube-cube orientation relationship with the matrix, appear during aging. Typical Orowan loops are formed in $Ni_3Al$ containing fine dispersions of $M_{23}C_6$ particles. In the L10-ordered TiAl containing 0.1~2.0 mol.% carbon, TEM observations revealed that needle-like precipitates, which lie only in one direction parallel to the [001] axis of the $L1_0$ matrix, appear in the matrix and preferentially at dislocations. Selected area electron diffraction (SAED) patterns analyses have shown that the needle-shaped precipitate is $Ti_3AlC$ of perovskite type. The orientation relationship between the $Ti_3AlC$ and the $L1_0$ matrix is found to be $(001)_{Ti3AlC}//(001)_{L10\;matrix}$ and $[010]_{Ti3AlC}//[010]_{L10\;matrix}$. By aging at higher temperatures or for longer period at 1073 K, plate-like precipitates of $Ti_2AlC$ with a hexagonal structure are formed on the {111} planes of the $L1_0$ matrix. The orientation relationship between the $(0001)_{Ti2AlC}//(111)_{L10\;matrix}$ is and $[1120]_{Ti2AlC}//[101]_{L10\;matrix}$. High temperature strength of TiAl increases appreciably by the precipitation of fine carbide. Dislocations bypass the carbide needles at further higher temperatures.

소동물 Iodine-125 SPECT 개발을 위한 컴퓨터 시뮬레이션 (A Computer Simulation for Small Animal Iodine-125 SPECT Development)

  • 정진호;최용;송태용;정용현;정명환;홍기조;민병준;최연성;이경한;김병태
    • 대한핵의학회지
    • /
    • 제38권1호
    • /
    • pp.74-84
    • /
    • 2004
  • 목적:. I-125는 저에너지(27-35 keV) 방사선을 방출하기 때문에 두께가 얇은 섬광결정과 조준기를 사용할 수 있어 고분해능, 고민감도 영상획득에 유리한 물리적 특성을 가지고 있다. 이 연구의 목적은 새로운 시뮬레이션 도구인 GATE (Geant4 Application for Tomographic Emission)를 사용하여 최적의 I-125 SPECT 시스템 파라미터를 도출하는 것이다. 대상 및 방법: 시뮬레이션 방법의 신뢰성을 검증하기 위해, Weisenberger 등이 개발한 감마 카메라 시스템을 모사하였다. 섬광체로 평판형 Nal(T1)을 사용하였으며, 두께는 검출효율을 계산해서 결정하였다. 평행구멍조준기와 바늘구멍조준기의 여러 파라미터가 공간분해능과 민감도에 미치는 영향을 평가하였다. 그리고 최적화된 조준기를 결합한 I-125 SPECT의 성능을 평가하였다. 결과: 시뮬레이션에 대한 신뢰성 검증연구 결과, 측정과 시뮬레이션에서 공간분해능(4%)과 민감도(3%)가 유사함을 확인하였다. Nal(T1) 두께는 I-125 감마선을 98% 검출할 수 있도록 1 mm로 결정하였다. 시뮬레이션 결과 고분해능 평행구멍조준기로 구멍크기가 0.2 mm이고 길이가 5 mm인 사각구멍조준기를 선택하였고, 범용 평행구멍조준기로 구멍크기가 0.5 m이고, 길이가 10 mm인 육각구멍조준기를 선택하였다. 바늘구멍조준기는 구멍지름이 0.25 mm이고 채널높이가 0.1 mm이며, 허용각도가 90도인 조준기를 선택하였다. 최적화된 고분해능 평행구멍조준기, 범용 평행구멍조준기, 바늘구멍조준기를 결합한 I-125 SPECT의 재구성 영상 공간분해능은 각각 1.2 mm, 1.7 mm, 0.8 mm였으며, 민감도는 39.7 cps/MBq, 71.9 cps/MBq, 5.5 cps/MBq이었다. 결론: GATE 시뮬레이션으로 I-125 영상에 적합한 섬광결정 파라미터 및 조준기 파라미터를 도출하였다. 이 연구결과는 I-125 SPECT로 탁월한 고분해능, 고민감도 영상을 얻을 수 있음을 보여준다.

합성된 탄산염 및 황산염 그린 러스트의 형성 메커니즘과 이화학적 특성 규명 (Characterization of Synthesized Carbonate and Sulfate Green Rusts: Formation Mechanisms and Physicochemical Properties)

  • 이선용;최수연;장봉수;이영재
    • 광물과 암석
    • /
    • 제35권2호
    • /
    • pp.111-123
    • /
    • 2022
  • 본 연구는 자연계에서 가장 흔하게 관찰되는 두 그린 러스트(green rust) 광물인 carbonate green rust (CGR)과 sulfate green rust (SGR)을 공침법(co-precipitation)을 통해 각각 합성하고, 이들의 형성 메커니즘 및 이화학적 특성들을 체계적으로 규명하였다. X-선 회절(XRD) 분석 및 리트벨트 정련 수행 결과, 본 합성 조건에서 이차광물상 없이 이중층수산화물로서 CGR과 SGR이 합성됨을 확인하였다. 또한, 각각의 구조 파라미터는 CGR의 경우 a(=b)축 = 3.17 Å, c축 = 22.52 Å이고, SGR의 경우 a(=b)축 = 5.50 Å, c축 = 10.97 Å이며, 이들의 미결정 크기는 각각 (003)면 기준 57.8 nm와 (001)면 기준 40.1 nm로 밝혀졌다. 주사전자현미경/에너지 분산형 분광분석(SEM/EDS) 결과, CGR과 SGR은 모두 육각 판상의 전형적인 이중층수산화물 결정 형상을 보이지만 탄소(C)와 황(S)의 함량은 서로 다르게 나타났다. 퓨리에 변환 적외선(FT-IR) 분광 분석결과, 탄산염(CO32-)와 황산염(SO42-) 이온들이 각각 CGR과 SGR의 층간 음이온으로 밝혀졌고, 이는 XRD를 활용한 광물상 동정 결과와 잘 일치한다. 철 용액으로의 수산화이온(OH-) 주입 시간에 따른 혼합 용액의 pH와 Eh, 그리고 잔류 철 농도의 비율(Fe(II):Fe(III)) 측정 결과, 시간에 따른 차이는 있지만 두 green rusts 모두 1단계 전구체 형성, 2단계 중간 생성물로의 상변환, 그리고 3단계 green rust로의 상변환과 에이징에 의한 결정성장으로 이어지는 결정 형성 메커니즘을 보이는 것으로 판단된다. 본 연구는 공침법을 통해 CGR과 SGR을 안정적으로 합성하고 이들의 형성 메커니즘과 이화학적 특성을 규명함으로써, green rust를 활용한 응용 연구 및 산업 활용에 원천 기초자료를 제공할 것으로 기대된다.