• 한국정보처리학회논문지
• /
• 제6권9호
• /
• pp.2311-2319
• /
• 1999

병렬 컴퓨팅에 있어 NP-complete 문제인 태스크 할당문제에 대한 두 가지 휴리스틱 알고리즘을 제시한다. 할당문제는 분산 메모리 멀티컴퓨터의 멀티 프로세싱 노드에 다중통신 태스크들을 최적의 매핑을 찾는 것이다. 태스크들을 목표 시스템 구조의 노드들에 매핑시키는 목적은 해법 품질에 손상 없이 병렬 실행시간을 최소화하기 위함이다. 많은 휴리스틱 기법들이 만족한 매핑을 얻기 위해 채택되어 왔다. 본 논문에서 제시되는 휴리스틱 기법은 유전자 알고리즘(GA)과 시뮬레이티드 어닐링(SA) 기법에 기반을 둔다. 매핑 설정을 위한 총 계산 비용으로 목적함수를 수식화하고 휴리스틱 알고리즘들의 성능을 평가한다. 랜덤, 그리디, 유전자, 어닐링 알고리즘들을 사용하여 얻은 해법의 품질과 시간을 비교한다. 할당 알고리즘 시뮬레이션 연구를 통한 실험적 결과를 보여준다.

• 한국공간정보시스템학회 논문지
• /
• 제11권4호
• /
• pp.39-46
• /
• 2009

일반적으로 휴리스틱을 이용한 알고리즘에서는 탐색 비용이 증가하는 문제가 발생할 수 있다. 휴리스틱에 의해 결정된 추정 경로에 실제 경로가 존재하지 않을 경우, 휴리스틱 가중치 값이 비슷한 2 가지 이상의 경로가 존재할 경우 탐색 비용이 증가한다. 이 논문에서는 탐색 비용 증가 문제점을 해결하기 위해 추상 그래프를 제안한다. 추상 그래프는 실제 도로를 단순화한 그래프로서, 전체 지도를 고정된 크기의 그리드 셀로 나누고, 셀과 도로 정보를 기반으로 생성된다. 경로 탐색은 추상 그래프 탐색, 실제 도로 네트워크 탐색 순으로 2단계로 수행된다. 106,254개의 간선으로 이루어진 실제 도로 네트워크 데이터에 대해서 성능 평가 실험을 수행한 결과와 탐색 비용 측면에서 그리드 셀 크기에 따라 그리드 기반 A* 알고리즘에 비해 최소 3%에서 최대 35% 좋은 성능을 보였다. 반면에 유효 셀을 제외한 영역에 대한 탐색이 이루어지지 않기 때문에, 생성된 경로의 이동 비용은 1.5~6.6% 증가하였다.

• Journal of the Korean Data and Information Science Society
• /
• 제25권1호
• /
• pp.169-176
• /
• 2014

계수과정은 다양한 분야에서 활용되고 있으며 그 성질은 강도함수에 의해 결정된다. 일정 구간에서 연속적으로 과정이 관측될 때, 우도함수를 이용하여 강도함수의 모수를 추정할 수 있다. 그러나 기존의 연구는 직관적인 방법에 의한 우도함수 유도이며, 여러 명의 저자에 의해 얻은 우도함수가 일치하지 않아 우도함수를 이용한 최우추정치를 구하는 문제 등의 적용에 어려움이 발생하고 있다. 따라서 이 단신연구에서는 계수과정의 우도함수를 엄밀한 방법으로 유도하여 기존의 문제점을 해결한다.

• 한국환경복원기술학회지
• /
• 제20권6호
• /
• pp.133-149
• /
• 2017

As cities face increasing problems such as aging, environmental pollution and growth limits, we have been trying to incorporate sustainability into urban planning and related policies. However, it is very difficult to generate a 'sustainable spatial plans' because there are trade-offs among environmental, society, and economic values. This is a kind of non-linear problem, and has limitations to be solved by existing qualitative expert knowledge. Many researches from abroad have used the meta heuristic optimization algorithms such as Genetic Algorithms(GAs), Simulated Annealing(SA), Ant Colony Optimization(ACO) and so on to synthesize competing values in spaces. GAs is the most frequently applied theory and have been known to produce 'good-enough plans' in a reasonable time. Therefore we collected the research on 'spatial optimization model based GAs' and analyzed in terms of 'study area', 'optimization objective', 'fitness function', and 'effectiveness/efficiency'. We expect the results of this study can suggest that 'what problems the spatial optimization model can be applied to' and 'linkage possibility with existing planning methodology'.

• 품질경영학회지
• /
• 제30권4호
• /
• pp.137-153
• /
• 2002

Viewed as a more systematic approach of creating high quality products and bringing them into market at a lower cost and in significantly less time, it attracts the attention of quality designers to quality function deployment (QFD) approach. In attempt to reduce the design cycle, the industry has responded with concurrent design effort. In a sense, concurrent engineering refers to the integration of various activities within the broad scope of the product life cycle ［17］. Over the last ten years, much has been written about QFD but little has been available in terms of the underlying guide methodology. The methodology of QFD is quite simple and many will say that they have done it in the past but just have not formalized it into the form that this discipline requires. QFD ties the product, user, value, and manufacturing viewpoints together in a continuous process of defining the product design and manufacturing requirements. The value viewpoint recognizes the cost to obtain certain functionality, and the manufacturing viewpoint addresses conformance to requirements, but in a broader sense, the variability in production. In this paper, the QFD system acquisitions are described, and two heuristic approaches solving for the complex design process, especially the size reduction of design process and precedence-constrained relationship in QFD are proposed, and the empirical example is illustrated.

• Nuclear Engineering and Technology
• /
• 제54권3호
• /
• pp.940-947
• /
• 2022

Meta-heuristic algorithms have found their place in optimization problems. Henry gas solubility optimization (HGSO) is one of the newest population-based algorithms. This algorithm is inspired by Henry's law of physics. To evaluate the performance of a new algorithm, it must be used in various problems. On the other hand, the optimization of the proportional-integral-derivative (PID) gains for load-following of a nuclear power plant (NPP) is a good challenge to assess the performance of HGSO. Accordingly, the power control of a pressurized water reactor (PWR) is targeted, based on the point kinetics model with six groups of delayed-neutron precursors. In any optimization problem based on meta-heuristic algorithms, an efficient objective function is required. Therefore, the integral of the time-weighted square error (ITSE) performance index is utilized as the objective (cost) function of HGSO, which is constrained by a stability criterion in steady-state operations. A Lyapunov approach guarantees this stability. The results show that this method provides superior results compared to an empirically tuned PID controller with the least error. It also achieves good accuracy compared to an established GA-tuned PID controller.

• 전자공학회논문지A
• /
• 제28A권10호
• /
• pp.847-854
• /
• 1991

This paper presents a new output phase assignment algorithm which determines the phases of all the nodes in a given boolean network. An estimation function is defined, which is represented by the relation between the literals in the given function expression. A weight function, WT (fi, fj) is defined, which is represented by approximate amount of common subexpression between function fi and fj. Common Subexpression Graph(CSG) is generated for phase selection by the weight function between all given functions. We propose a heuristic algorithm finding subgraph of which sum of weights has maximum by assigning phases into the given functions. The experiments with MCNC benchmarks show the efficiency of the proposed method.

• Structural Engineering and Mechanics
• /
• 제58권3호
• /
• pp.533-553
• /
• 2016

In this paper, the recently developed meta-heuristic algorithm called tug of war optimization is applied to optimal design of castellated beams. Two common types of laterally supported castellated beams are considered as design problems: beams with hexagonal openings and beams with circular openings. Here, castellated beams have been studied for two cases: beams without filled holes and beams with end-filled holes. Also, tug of war optimization algorithm is utilized for obtaining the solution of these design problems. For this purpose, the minimum cost is taken as the objective function, and some benchmark problems are solved from literature.

• 정보기술과데이타베이스저널
• /
• 제6권2호
• /
• pp.71-86
• /
• 1999

The performance of relational database is measured by the number of disk accesses necessary to transfer data from disk to main memory. The paper proposes to vertically partition relations into fragments and to allow attribute replication to reduce the number of disk accesses. To reduce the computational time, heuristic search method using genetic algorithm is used. Genetic algorithm used employs a rank-based-sharing fitness function and elitism. Desirable parameters of genetic algorithm are obtained through experiments and used to find the solutions. Solutions of attribute replication and attribute non-replication problems are compared. Optimal solutions obtained by branch and bound method and by heuristic solutions(genetic algorithm) are also discussed. The solution method proposed is able to solve large-sized problems within acceptable time limit and shows solutions near the optimal value.

• 전자공학회논문지B
• /
• 제30B권9호
• /
• pp.1-8
• /
• 1993

In this paper, a new approach to the minimization of two-level Reed-Muller circuits is presented. In contrast to the previous method of using Xlinking operations to join two cubes for minimization. Cube selection method tries to select cubes one at a time until they cover the ON-set of the given function. A simple heuristic for selecting appropriate cubes is presented. In this heuristic, simply all cubes from the largest to the smallest are tried and whenever they decrease the number of remaining terms they are accepted. Since cubes once selected are not considered for a new selection, our method takes less time than other methods that need repetitive optimization process. The experimental results turned out to be improved in many cases compared to the best results in the literature.