• Clinics in Shoulder and Elbow
• /
• v.6 no.2
• /
• pp.138-142
• /
• 2003

The Bennett lesion is an extraarticular ossification of the posteroinferior quadrant of the glenoid. The lesion may be a source of shoulder pain in throwing athletes. The Bennett lesion may be caused by traction on the posterior band of the inferior glenohumeral ligamentous complex produced by posteroior subluxation during cocking, posterior subluxation during cocking, posterior decelerate forces during follow-through, or a combination of the two. Treatment is usually conservative and focused at the associated intraarticular abnormality and pathomechanics.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2000.01a
• /
• pp.215-216
• /
• 2000

We fabricated the thin-film transistors using organic semiconductor, pentacene, on $SiN_x$, gate insulator. X-ray diffraction experiments were performed for the sample after heat-treatments at higher temperatures. We confirmed that we obtained "thin-film phase" from the condition used here. From the electrical measurements, we also confirmed that no charges are accumulated at the interface between organic and insulating layer, and FET characteristics of the organic FET using pentacene was discussed.

• Journal of the Korean Society of Costume
• /
• v.66 no.1
• /
• pp.1-12
• /
• 2016

Najang was the central Seori, affiliated to the Ministry of War during the Joseon dynasty. The objective of this study is to research the existing authentic Najang costumes from the late-Joseon dynasty by examining factors, such as the composition of the costume, size, and method of creation, and attempt to replicate it. The Leipzig Grassi Museum in Germany possesses an official uniform of Najang from the late-Joseon dynasty, and we visited the museum in May of 2013 to examine it for the study. Written records, or Uigwe, and other pictorial data from the Joseon Dynastry describe the Najang wearing black or navy clothing with white decoration and pointy hats. The most notable characteristic of the Najang uniform is that it has the cotton cords pattern. The hat has a brass ball attached, which was worn with the ball facing the front in the early Joseon Dynasty, and was worn facing the back in the later years. They usually wore black head cloths (Heuk-geon), but would attach feathers on the black hats (Heuk-rip) for special occasions. The Najang uniform preserved in the Leipsiz Grassi Muesim does not exist in Korea. It is made of cotton. The cotton cord pattern of the uniform of Najang was made using single-ply cords and double-ply cords. The hat worn by Najang is in a form of a cone that becomes narrower towards the top or is in a form with wide and open end. It was made of oiled paper covered with hemp, and two circular metal disks were attatched at the rear.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.11 no.1
• /
• pp.1-16
• /
• 2009

Ip-yeong or gat-keun decorate heuk-rip, supplementing its simplicity. When the wind blew, a dynamic beauty was created, especially if the gat-keun was made with long straps of jade or silk. Basically, ip-yeong was a practical chin strap to hold the gat tight on the head. Commoners made ip-yeong by folding cotton cloth or fine gauze. However, as available materials became diversified, people used cloth, jade, agate, amber, coral, gold medallion, rock crystal and bamboo as well, juk-yeong, which was made with bamboo, became popular especially when Heungsun Daewon-gun, the father of King Kojong, decreed that people wear simple clothes. Most records concerning ip-yeong in Chosun-wangjo-shillok, the authentic record of the Joseon Dynasty, are related to forbidding a sumptuous life. The book also suggests that ip-yeong was bestowed by the king or was offered to foreign diplomats as gifts. Ip-yeong doesn't seem to be a unique system for Korea. Based on portraits or paintings where ip-yeong can be found, it seems to have been widely used during the Yuan dynasty and the Goryeo dynasty. The system disappeared in China as the Ming Dynasty was established, but it remained in use in the Korean Goryeo dynasty and through the Joseon. Literature suggests that the same materials were used for ip-yeong from the beginning of Joseon to the end of the dynasty. Guyeongja refers to a ring that connects an ipja to a chin strap. Guyeongja made with silver, bronze and jade still remain. In gungjungbalgi, the royal court inventory book, records of imogarye can be found (1882), where ten pairs of pure gold strap rings and ten pairs of gold-plated ones were used for a royal wedding.

• ETRI Journal
• /
• v.25 no.6
• /
• pp.531-534
• /
• 2003

This report describes the effect of optical delay on the suppression of the power transient excursion in a combined gain-controlled erbium-doped fiber amplifier with an internal optical feedback loop (OFL). A simple homogeneous model showed that the optical delay caused a phase change in the oscillation of the surviving and laser channels, which resulted in a reduction of the overall power transient excursion. In addition to the reduction, a real system with a 1528.7-nm OFL shifted the oscillation upward or downward according to channel removal or addition, whereas another one with a 1560.9-nm OFL did not. This different transient behavior reflected a control-wavelength dependence on optical automatic gain control, where spectral-hole burning dominated over relaxation oscillation for 1528.7 nm, and vice versa for 1560.9 nm.

• ETRI Journal
• /
• v.30 no.2
• /
• pp.205-215
• /
• 2008

Many control schemes have been proposed for flow-level traffic control. However, flow-level traffic control is implemented only in limited areas such as traffic monitoring and traffic control at edge nodes. No clear solution for end-to-end architecture has been proposed. Scalability and the lack of a business model are major problems for deploying end-to-end flow-level control architecture. This paper introduces an end-to-end transport architecture and a scalable control mechanism to support the various flow-level QoS requests from applications.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2006.04a
• /
• pp.125-130
• /
• 2006

본 연구는 터널공사현장을 대상으로 기존의 터널 측량 방법에서의 문제점을 분석하여 오차요인과 경비절감 문제등을 해결할 수 있는 측량시스템을 개발하여 기존방법과 본 연구방법을 적용하여 측량 및 시공하였을 경우를 비교 분석함으로써 공정관리의 효율성 증대를 위한 측량방법을 제안하였다. 이러한 문제점들을 해결하기 위하여 측량 장비와 Note book을 연결하여 현장에서 실시간으로 터널측량과 동시에 위치 및 오차들을 결정할 수 있는 시스템을 개발하였다. 터널측량시스템을 개발함으로서 종래의 터널 측량시 오차발생을 최소화하고, 터널 굴착시의 미굴 및 여굴의 가능성을 최소화하여 시공풀질의 향상과 원가 절감 및 공기 단축 등의 효과를 가져 올 수 있도록 하였다.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2006.04a
• /
• pp.405-410
• /
• 2006

The digital map version 2.0 is national base map which is used for frame work data, paper map making as well as geographic information system. National Geographic Institude has been research to make small scale digital map by using large scale digital map. NGI made from 25 1/5,000 digital maps to one 1/25,000 digital map ver 2.0 with map generalization system in 2003. However, they could not make 1/10,000 and l/50,000 digital map version 2.0 because of There is no portrayal on the scale 1/10,000 and 1/50,000 digital map in the existing regulations. therefore. We create the specification of the digital map on scale in order to make small scale digital map version 2.0 such as 1/10,000 and 1/50,000 scale.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2006.04a
• /
• pp.513-519
• /
• 2006

South Korea is currently promoting cadastral computerization to modernize the field. Problems of cadastral mismatches are mostly resolved through cadastral mismatch organization projects. Three-dimensional cadastral drafting Is also on its way to wide adoption. In order to safeguard the property ownership rights of people and deliver accurate cadastral information quickly by constructing a three-dimensional cadastral information system, this study intends to provide solutions to survey real-time kinematic GPS (RTK-GPS) in mobile environments and to produce three-dimensional cadastral maps real-time using digital plane tables.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1998.04a
• /
• pp.200-205
• /
• 1998

Although discretization methods such as the transfer matrix method (TMM) and the finite element method (FEM) have played an important role in the design or analysis of rotor-bearing systems, continuous system modeling and analysis are often desirable especially for sensitivity analysis or design. The present paper proposes a comprehensive modeling procedure to obtain exact solution of general rotor-bearing systems. The proposed method considers a Timoshenko beam model and makes use of complex coordinate in the formulation. The proposed method provides exact eigensolutions and frequency response functions (FRFS) of general multi-stepped rotor-bearing systems. The first numerical example compares the proposed method with FEM. The numerical study proves that the proposed method is very efficient and useful for the analysis of rotor-bearing systems.