• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2003년도 추계학술발표강연 및 논문개요집
• /
• pp.175-175
• /
• 2003

ZnO 박막은 그 동안 어려운 문제로 여겨진 p형 도핑방법이 점차 알려 지면서 발광소자 적용 가능성이 주목받고 있다. ZnO는 발광 스펙트럼(PL) 피크의 날카로움, 높은 exciton 결합에너지, 습식식각의 가능, 벽개면 형성의 용이함 및 동종 기판 적용 가능 등의 본질적인 장점을 지니고 있어 재현성있는 p형 도핑방법 기술이 확립된다면 이를 이용한 발광소자 적용 시 기존의 질화물계에 비하여 우수한 소자 제조 가능성이 있다. 이에 따라 국내외에서 ZnO 박막제조에 관련된 많은 연구들이 진행되고 있다. 특히 ZnO 박막을 발광소자로 적용하기 위해서는 고품질의 에피탁시 박막을 성장시켜야 하며 이를 위하여 MBE, MOCVD, PLD법 등 다양한 에피탁시 박막증착이 시도되고 있다. 또한 보다 양질의 ZnO 박막을 성장시키기 위해 적절한 단결정 기판 및 버퍼층의 탐색과 각 기판에 따른 ZnO 박막의 물성평가 작업도 국내외의 여러 연구그룹에서 진행되고 있다.

• The Korean Journal of Ceramics
• /
• 제3권3호
• /
• pp.163-168
• /
• 1997

Most of heteroepitaxial $\beta$-SiC thin films have been successfully grown on Si(100) adapting a carburizing process, by which a few atomic layers of substrate surface is chemically converted to very thin SiC layer using hydrocarbon gas sources. Using an organo-silicon precursor, bis-trimethylsilymethane (BTMSM, [$C_7H_{20}Si_2$]), heteropitaxial $\beta$-SiC thin films were successfully grown directy on Si substrate without a carburized buffer layer. The defect density of the $\beta$-SiC thin films deposited without a carburized layer was as low as that of $\beta$-SiC films deposited on carburized buffer layer. In addition, void density was also reduced by the formation of self-buffer layer using BTMSM instead of carburized buffer layer. It seems to be mainly due to the characteristic bonding structure of BTMSM, in which Si-C was bonded alternately and tetrahedrally (SiC$_4$).

• 한국표면공학회지
• /
• 제29권5호
• /
• pp.467-473
• /
• 1996

Heteroepitaxial growth of cubic silicon carbide films on Si(001) and Si(111) substrates at temperatures 900-$1000^{\circ}C$ has been achieved by high vacuum chemical vapor deposition using the single precursor 1, 3-disilabutane without carrying out the carbonization process of the substrate surfaces. The deposition temperature range is much lowered compared with conventiontional chemical vapor deposition where separate sources for silicon and carbon are employed. The deposition procedure is quite simple and safe. The qualities of the films were found to be very good judging from the results obtained by various characterization techniques including reflection high energy electron diffraction, X-ray diffraction, X-ray pole figure analysis, Rutherford backscattering spectrometry, Auger depth profiling, and transmission electron diffraction.

• 한국전기전자재료학회논문지
• /
• 제36권5호
• /
• pp.442-453
• /
• 2023

Tandem or multijunction solar cells (MJSCs) can convert sunlight into electricity with higher efficiency (η) than single junction solar cells (SJSCs) by dividing the solar irradiance over sub-cells having distinct bandgaps. The efficiencies of various common SJSC materials are close to the edge of their theoretical efficiency and hence there is a tremendous growing interest in utilizing the tandem/multijunction technique. Recently, III-V materials integration on a silicon substrate has been broadly investigated in the development of III-V on Si tandem solar cells. Numerous growth techniques such as heteroepitaxial growth, wafer bonding, and mechanical stacking are crucial for better understanding of high-quality III-V epitaxial layers on Si. As the choice of growth method and substrate selection can significantly impact the quality and performance of the resulting tandem cell and the terminal configuration exhibit a vital role in the overall proficiency. Parallel and Series-connected configurations have been studied, each with its advantage and disadvantages depending on the application and cell configuration. The optimization of both growth mechanisms and terminal configurations is necessary to further improve efficiency and lessen the cost of III-V on Si tandem solar cells. In this review article, we present an overview of the growth mechanisms and terminal configurations with the areas of research that are crucial for the commercialization of III-V on Si tandem solar cells.

• 한국재료학회지
• /
• 제11권7호
• /
• pp.615-621
• /
• 2001

본 연구에서는 고변형된 이중 에피층에서 두 가지 종류의 반원 전위 루프 ($60^{\circ}$및 쌍격자 전위)의 생성 속도물 예측하는 모델을 제안한다. 모델링 시, 에피층 표면에서 발생하는 결함과 이곳에 집중되는 응력 효과를 고려하였으며, Matthew의 식을 발전시켜 에피층 두께에 따른 잔류 변형율을 변수로 사용하였다. 모델링을 통한 계산 결과에 의하면, 응력 집중 현상은 고변형된 이종에피층에서 전위 및 결정 결함 현상을 설명하는 데 매우 중요하였다. 또한,본 연구를 퉁하여, 응력 집중 현상이 에피층 성장 초기에 생성되는 전위 형태를 결정하는 주요한 인자 중 하나임을 단면 투과 전자 현미경 결과와의 비교를 통해 확인할 수 있었다.

• 한국재료학회지
• /
• 제8권2호
• /
• pp.165-172
• /
• 1998

초고진공에서 in situ 고상 에피택셜 방법으로 Si(111)기판 위에 에피택셜 $CoSi_2$ 초박막과 $Si/epi-CoSi_2/Si$(111) 의 이중 이종에피택셜 구조를 성장 시켰다. 2-MeV $^4He^{++}$ 이온 후방산란 분광기와 X-선 회절분석기 및 고분해능 투과전자 현미경을 이용하여 성장된 $CoSi_2$와 $Si/epi-CoSi_2/Si$(111)의 상, 조성, 결정성 그리고 계면의 미세구조를 조사하였다. 실온에서 증착된 Co 박막은 texture 구조를 갖는 Stransky-Krastanov 성장 모드를 나타내었다. 실온에서 Si(111)-$7\times{7}$ 기판 위에 Co를 $50\AA$ 증착한 후 $700^{\circ}C$로 10분간 in situ 열처리했을 때 초박막 A-type $CoSi_2$상이 성장되었고, 정합상관계는 $CoSi_2$[110]//Si[110] and $CoSi_2$(002)//Si(002)였으며, 편의각은 없었다. A-type $CoSi_2$/Si(111)계면은 평활하고 coherent 하였다. 양질의 epi-Si/epi-$CoSi_2$(A-type)/Si(111)구조는 Co/Si(111)계를 $700^{\circ}C$로 10분간 in situ로 열처리한 후 기판을 $500^{\circ}C$로 유지하면서 Si을 증착하였을 때 형성되었다.

• 한국전기전자재료학회논문지
• /
• 제16권7호
• /
• pp.573-578
• /
• 2003

Low temperature selective epitaxial growth of Si and SiGe has been obtained using an industrial single wafer chemical vapor deposition module operating at reduced pressure. Epitaxial Si and heteroepitaxial SiGe deposition with Ge content about 20 % has been studied as extrinsic base for self-aligned heterojunction bipolar transistors(HBTs), which helps to reduce the parasitic resistance to obtain higher maximum oscillation frequencies(f$\_$max/). The dependence of Si and SiGe deposition rates on exposed windows and their evolution with the addition of HCl to the gas mixture are investigated. SiH$_2$Cl$_2$ was used as the source of Si SEG(Selective Epitaxial Growth) and GeH$_4$ was added to grow SiGe SEG. The addition of HCl into the gas mixture allows increasing an incubation time even low growth temperature of 675∼725$^{\circ}C$. In addition, the selectivity is enhanced for the SiGe alloy and it was proposed that the incubation time for the polycrystalline deposit on the oxide is increased probably due to GeO formation. On the other hand, when only SiGe SEG(Selective Epitaxial Growth) layer is used for extrinsic base, it shows a higher sheet resistance with Ti-silicide because of Ge segregation to the interface, but in case of Si or Si/SiGe SEG layer, the sheet resistance is decreased up to 70 %.

• 한국자기학회지
• /
• 제19권4호
• /
• pp.126-132
• /
• 2009

Molecular-Beam Epitaxy 방법으로 합성된 MnAs 박막의 물리적 특성을 기판의 종류와 증착 온도에 따라 조사하였으며 더불어 이들 시료의 증착 후 열처리 효과를 조사하였다. 증착 온도가 $600^{\circ}C$일 경우에는 기판의 종류에 관계없이 type-B의 결정 방향성을 보였으나 $200^{\circ}C$ 이하에서 합성한 시료에 대하여는 type-A로 합성되었다. $600^{\circ}C$에서 GaAs(001) 기판에 성장시킨 시료에서는 자기화 용이축 내에서도 특히 한쪽 방향으로 자화가 되어 있음을 확인하였다. 강자성을 보이지 않던 $120^{\circ}C$에서 증착한 MnAs/Si(001)와 실온에서 강자성과 상자성이 공존하였던 $200^{\circ}C$에서 증착한 MnAs/GaAs(001) 시료의 경우 $600^{\circ}C$에서 열처리 하였을때 자기적 특성이 크게 향상되었다.

• 한국전기전자재료학회논문지
• /
• 제25권8호
• /
• pp.575-579
• /
• 2012

Heteroepitaxial InP films have been grown on GaAs substrates to study the effects of the nucleation layer's surface roughness on the epitaxial layer's quality. For this, InP nucleation layers were grown at $400^{\circ}C$ with various ethyldimethylindium (EDMIn) flow rates and durations of growth, annealed at $6200^{\circ}C$ for 10 minutes and then InP epitaxial layers were grown at $550^{\circ}C$. It has been found that the nucleation layer's surface roughness is a critical factor on the epitaxial layer's quality. When a nucleation layer is grown with an EDMIn flow rate of 2.3 ${\mu}mole/min$ for 12 minutes, the surface roughness of the nucleation layer is minimum and the successively grown epitaxial layer's qualities are comparable to those of the homoepitaxial InP layers reported. The minimum full width at half maximum of InP (200) x-ray diffraction peak and that of near-band-edge peak from a 4.4 K photoluminescence are 60 arcmin and 6.33 meV, respectively.

• 한국전기전자재료학회논문지
• /
• 제15권7호
• /
• pp.564-569
• /
• 2002

Heteroepitaxial GaN films were grown on sapphire substrates in order to study the effects of the buffer layer's surface roughness and thermal treatment on the epitaxial layer's quality. For this, GaN buffer layers were grown at $550^{\circ}C$ with various TMGa flow rates and durations of growth, and annealed at $1010^{\circ}C$ for 3 min after the temperature was raised by 23 ~ $92^{\circ}C/min$, and then GaN epitaxial layers were grown at $1000^{\circ}C$. It has been found that the buffer layer's surface roughness and the thermal treatment condition are critical factors on the quality of the epitaxial layer. When a buffer layer was frown with a TMGa flow rate of $24\mu mole/min$ for 30 sec, the surface roughness of the buffer lather was minimum and when the thermal ramping rate was $30.6^{\circ}C/min$ on this layer, the successively grown epitaxial layer's crystalline and optical qualities were optimized with a specular morphology. The minimum full width at half maximum(FWHM) of GaN(0002) x-ray diffraction peak and that of near-band-edge(NBE) peak from a room temperature photoluminescence (PL) were 5 arcmin and 9 nm, respectively.