• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.706-709
• /
• 1997

Extruders are the heart of the polymer processing industry. The single most important mechanical element of a screw extruder is the screw. The proper design of the geometriy of the extruder screw is of crucial importance to the proper functioning of the extruder. If material transport instabilities occur as a result of improper screw geometry, even the most sophisticated computerized control system cannot solve the problem. For this purpose, characteristics design on helix angle of the extruder screw. This paper presents strength of the screw flight, optimum helix angle versus dimensionless down channel pressure gradient, optimum helix angle versus the power law index in simultaneous optimization, volumetric efficiency versus helix angle at various number of flights and power consumption versus helix angle in the barrel of screw extruder.

• 한국공작기계학회논문집
• /
• 제16권4호
• /
• pp.45-50
• /
• 2007

In this paper, the FEM(Finite Element Method) has been applied to understand the geometrical characteristics and to analyze the stress of a helical gear. The helical gear is simulated and analyzed by adding many thin spur gear with helix angles and twist angles. Helical gears with different helix angle and face width have been studied. The results show that the root fillet stress is increased proportionally to helix angle and face width. Namely, as the face width increases, root fillet stress decreases, and as helix angle gets bigger, root fillet stress increases.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.373-377
• /
• 2002

In the end milling operation the deflection of the cutter is an important factor affecting the accuracy of machining with implications on the selection of cutting parameters and economics of the operation. The deflection of the end mill was studied both experimentally with strain gauge, tool dynamometer, laser measuring apparatus and on a finite element model of the cutting using ANSYS software. The deflection of machining tool with various helix angles was studied with FEM simulation and experiment. ANSYS analysis performed on the finite element model of the end mill provides deflection results which agree within 15.0% with the experimental ones.

• 한국생산제조학회지
• /
• 제24권5호
• /
• pp.508-513
• /
• 2015

In this study, the effect of the helix angle and rake angle of a flat end-mill in the milling of titanium alloy was investigated. Tool shape parameters such as helix angle and rake angle affect the cutting force, cutting zone temperature, vibration, and chip flow mechanism, which in turn determine tool life, surface integrity, and dimensional accuracy of the milling process. To investigate the effect of the helix and rake angles, a certain range of parameters was selected, and three-dimensional tool models were generated for finite element analysis (FEA) for each case. The cutting force and pressure on the tool flank face and rake face were investigated by FEA. Further, several tool models were proposed for machining tests. The cutting force characteristics were investigated by the machining tests.

• 한국인터넷방송통신학회논문지
• /
• 제16권6호
• /
• pp.319-327
• /
• 2016

본 논문에서는 나무나 염소 뿔처럼 대부분의 동식물이 대칭임을 살펴본다. 또한 DNA를 가지고 있는 인간의 신체 역시 대칭이다. 피보나치수열, 식물의 나선, 동물의 대수 나선에서 볼 수 있는 것은 대칭이다. 해바라기 꽃은 원형이다. 원(元)은 원점을 중심으로 회전을 해도 모양이 꼭 같으므로 회전대칭이다. 공간상의 회전변환을 넘어서, 시간 공간의 대칭적 변환으로 일반화하면 아인슈타인의 특수상대성 이론이 시공간 변환관계이다. 동식물의 나선은 좌우 나선들이 대칭을 이루며 그 속에는 element-wise inverse가 존재한다. Hadamard 행렬 중 가운데 하중 값을 2로 준 것은 자연대수의 밑 2와 같고, 나선 행렬은 Symmetric하며 역행렬은 element-wise inverse이다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 추계학술대회논문집
• /
• pp.977-983
• /
• 2003

Free vibration analysis of helical springs was performed by the use of the commercial finite element analysis program, ANSYS. The investigation of national frequency was focused on the effect of various parameters such as boundary conditions, spring indices, number of coil turns and helix angles which are considered to affect the free vibration of a spring. The finite element method was validated by comparison with the result of a previouosly published literature. The similarity of frequency trend was shown among three boundary conditions: clamped-clamped, free-free, simpliy supported-simply supported but there was no similarity in light of mode shapes among them. Several modes showed similar frequencies on and near the frequencies identified by the natural frequency formula of Wahl. Natural frequencies increased with spring indices and number of turns decreasing and with helix angles increasing. The results investigated by finiete element method were compared with the experemental result and theoretical result and showed a good agreement among them.

• 대한기계학회논문집A
• /
• 제28권6호
• /
• pp.860-866
• /
• 2004

In the end milling operation the deflection of the cutter is an important factor affecting the accuracy of machining, with implications on the selection of cutting parameters and economics of the operation. Several studies were devoted to the end mill deflection and its effects, notably, providing a useful insight into the problem. Although the deflection affects adversely the accuracy, the flexibility of the cutter is beneficial in attenuating the overload in a sudden transient situation, as well as in attenuating chatter. The deflection of the end mill was studied both experimentally with strain gauge, tool dynamometer, laser measuring apparatus and on a finite element model of the cutting using ANSYS software. The deflection of machining tool with various helix angles was studied with FEM simulation and experiment. ANSYS analysis performed on the finite element model of the end mill provides deflection results which agree within 15.0% with the experimental ones.

• 한국정밀공학회지
• /
• 제14권12호
• /
• pp.143-152
• /
• 1997

The deflection of an end mill is very important in machining process and cutting simulation because it affects directly workpiece accuracy, cutting force, and chattering. In this study, the deflection of the end mill was studied both experimentally and by using finite element analysis. And the moment of inertia of cross sections of the helical end mill is calculated for the determination of the relation between geometry of radial cross section and rigidity of the tools. Using the Bernoulli-Euler beam theory and the concept of equivalent diameter, a deflection model is established, which includes most influences from tool geomety parameters. It was found that helix angle attenuates the rigidity of the end mill by the finite element analysis. As a result, the equivalent diameter is determined by tooth number, inscribed diameter ratio, cross sectional geometry and helix angle. Because the relation betweem equivalent diameter and each factor is nonlinear, neural network is used to decide the equivalent diameter. Input patterns and desired outputs for the neural network are obtained by FEM analysis in several case of end milling operations.

• 한국전자파학회논문지
• /
• 제19권8호
• /
• pp.906-912
• /
• 2008

1.5 cc 이하의 안테나 체적을 갖는 소형 안테나의 이득을 향상시킬 수 있는 3차원 구조의 휴대폰 내장형 안테나를 설계하고 이를 제작하였다. 소형 안테나 경우, 공진을 위해서 안테나를 복잡하게 구부리게 된다. 이러한 구부림은 전류 상쇄 작용을 발생시킴으로써 결국 이득 감소를 초래한다. 본 연구에서는 안테나의 구부림을 최소화하여 전류 상쇄를 줄였다. 짧은 안테나 길이의 보상과 방사 소자로의 동시 역할을 위해 헤릭스 소자를 사용하였다. 타당성을 입증하기 위하여 1.5 cc 체적으로 설계한 안테나를 프레스 공법으로 제작하여 2중 대역 휴대폰에 적용하였다. 측정 결과, GSM/USPCS 대역에서 슬라이드 다운 및 업일 때 효율과 이득은 각각 최대 27.73 %, 46.84 % 및 0.29 dBi, 2.27 dBi로 소형임에도 불구하고 양호한 특성이 나타났다. 방사 패턴은 2대역 모두 H-면 전방향성 특성을 보였다.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2001년도 제33회 춘계학술대회 개최
• /
• pp.248-256
• /
• 2001

Capacities of screw are pumping, steady flow of polymer melts, volumetric efficiency, steady volumetric throughout etc. they are affected by geometry of screw, heat flux, pressure on inside barrel, rotating velocity, friction coefficient at screw surface etc. Also the temperature of polymer melts by heating pad and injection pressure play a very important role in the injection molding machine. by computation volumetric efficiency increases as rotating velocity increases, flight number increses, and decreases as friction coefficient increases. but volumetric throughout is different :s flight number increases with helix angle variability. so in this paper we analyze thermal distortion and stress of screw includes pressure and temperature distributions by finite element analysis to understand what design factors influence on thermo-mechanical characteristics of screw.