Browse > Article
http://dx.doi.org/10.3795/KSME-A.2004.28.6.860

The Characteristics of the Milling Tool Deflection According to the Variation of Helix Angle  

Maeng, Min-Jae (동서울대학 기계공학부)
Chung, Joon-Ki (홍익대학교 기계ㆍ시스템디자인공학과)
Publication Information
Transactions of the Korean Society of Mechanical Engineers A / v.28, no.6, 2004 , pp. 860-866 More about this Journal
Abstract
In the end milling operation the deflection of the cutter is an important factor affecting the accuracy of machining, with implications on the selection of cutting parameters and economics of the operation. Several studies were devoted to the end mill deflection and its effects, notably, providing a useful insight into the problem. Although the deflection affects adversely the accuracy, the flexibility of the cutter is beneficial in attenuating the overload in a sudden transient situation, as well as in attenuating chatter. The deflection of the end mill was studied both experimentally with strain gauge, tool dynamometer, laser measuring apparatus and on a finite element model of the cutting using ANSYS software. The deflection of machining tool with various helix angles was studied with FEM simulation and experiment. ANSYS analysis performed on the finite element model of the end mill provides deflection results which agree within 15.0% with the experimental ones.
Keywords
End Milling; Deflection; Strain Gauge; Helix Angle; Tool Dynamometer; Laser Vibrometer Controller;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 Smith, S. and Tlusty, J., 1991, 'An Overview of Modeling and Simulation of the Milling Process,' Transactions of the ASME, Vol. 113, pp. 169-175   DOI
2 Devor, R. E. and Sutherland, J., 1986, 'An Improved Method for Cutting Force and Surface Error Prediction in Flexible End Milling System,' Transactions of the ASME, Vol. 108, pp. 269-279   DOI
3 Lee, S. L., Maeng, M. J. and Chung, J. K., 1999, 'Tool Fracture Detection by End Mill Deflection,' Journal of the Korean Society of Machine Tool Engineers, Vol. 8, No. 2, pp. 100-107   과학기술학회마을
4 Kops, L. and Vo, D., 1990, 'Determination of the Equivalent Diameter of End Mill based on Its Compliance,' Annals of the CIRP, Vol. 39, No. 1, pp. 93-96   DOI   ScienceOn
5 Tlusty, J. and Elbestawi, M., 1979, 'Constraints in Adaptive Control with Flexible End Mills,' Annals of the CIRP, Vol. 28, No. 1, pp. 253-255
6 Kenichi, K., Mitsushige, F., Katsuhiko, A. and Tomio, S., 1994, 'Analytical Prediction of Cemented Endmill,' Transactions of the JSPE, Vol. 60, No. 6, pp. 822-826
7 Ismail, F. and Tlusty, J., 1983, 'Special Aspects of Chatter in Milling, Transactions of the ASME, Vol. 105, pp. 24-32
8 Tlusty, J., and Macneil, P., 1975, 'Dynamics of Cutting Force in End Milling,' Annals of the CIRP, Vol. 24, No. 1, pp. 21-25
9 Kline, W. A. and Devor, R. E., 1983, 'The Effect of Runout on Cutting Geometry and Force in the Milling,' Int. J. MTDR, Vol. 23, No. 2, pp. 123-140
10 Marellotti, M. E., 1941, 'An Analysis of the Milling Process,' Transactions of the ASME, Vol. 63, pp. 677-700
11 Kline, W. A., Devor, R. E. and Shareef, I. A., 1982, 'The Prediction of Surface Accuracy in End Milling,' Transactions of the ASME, Vol. 104, pp. 272-278   DOI