• Korean Journal of Ecology and Environment
• /
• v.55 no.3
• /
• pp.221-230
• /
• 2022

The spread of invasive alien plants is one of the most important causes of habitat and biodiversity loss. This research was conducted to secure basic data for the control of the invasive alien plant Solidago altissima. The following research objects were examined: the control; one-time mowing in June (1M6); two-time mowing in June and July (2M6M7); one-time mowing in Jun plus one-time Uprooting in July (2M6U7). The length growth in October, when the growth of S. altissima was completed, was in the order of control (199±19.96 cm), 1M6 (152±13.41 cm), 2M6U7 (54±3.17 cm), and 2M6M7 (45±19.96 cm). The 2M6M7 and 2M6U7 treatment was the most effective at inhibiting S. altissima of density, of 50.8% and 26.2% compared to the control, respectively. In contrast, one-time mowing (1M6) resulted in an increase in density compared to the control by 119.7%. In addition, this treatment also reduced flowering rate (%) of S. altissima. The most effective treatment among those tested was 2M6U7.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.7
• /
• pp.1244-1251
• /
• 2022

Marine accidents due to a loss of stability, have been gradually increasing over the last decade. Measures must be taken on the roll reduction of a ship. Amongst the measures, building an anti-roll tank in a ship is recognized as the most simple and effective way to reduce the roll motion. Therefore, this study aims to develop a computational model for a U-tube type anti-roll tank and to validate it by experiment. In particular, to validate the developed computational model, the height of the free surface in the tank was measured in the experiment. To develop a computational model, the mesh dependency test was carried out. Further, the effects of a turbulence model, time step size, and the number of iterations on the numerical solution were analyzed. In summary, a U-tube type anti-roll tank simulation had to be performed accurately with conditions of a realizable k-𝜖 turbulence model, 10^-2s time step size, and 15 iterations. In validation, the two cases of measured data from the experiment were compared with the numerical results. In the present study, STAR-CCM+ (ver. 17.02), a RANS-based commercial solver was used.

• 한국체육학회지인문사회과학편
• /
• v.51 no.4
• /
• pp.407-417
• /
• 2012

The purpose of the study was to determine the effects of pilates mat exercise on cardiovascular disease risk factors and inflammation markers in sarcopenic obesity elderly. All subjects were sarcopenic obesity(height for each of the arms, legs, appendicular muscle mass ratio of 1.16kg/m², 4.31kg/m², 5.21kg/m² under and % body fat is more than 30%) elderly performed the pilates mat exercise during 12-week for 60 minutes 3 times a weeks. All subjects of this study were examined the changes in cardiovascular disease risk factors(TC, TG, HDL-C, LDL-C, Glucose, Insulin) and inflammation markers(fibrinogen, adiponectin, leptin, CRP). The results of the study in the exercise group were as follows; The weight, % body fat, TC, TG, LDL-C, fibrinogen, CRP had significantly decreased and muscle mass, HDL-C, adiponectin had significantly increased. And also, pilates mat exercise can effective to improve sarcopenic obesity, and pilates mat exercises performed coy shrink obesity to cardiovascular disease and inflammatory response indicators of older women as old man's physical features of the deterioration of the prevention of obesity and muscle strength loss, causing the effective exercise method is meant to be.

• Journal of the Korean Geosynthetics Society
• /
• v.22 no.1
• /
• pp.87-96
• /
• 2023

There are a lot of difference between the surface settlement and the differential settlement measured at the Busan New Port, where the dredged and reclaimed clay layer exists and below the clay is originally thickly distributed. To find the cause and solution of this, the actual conditions of each differential settlement used for the soft ground improvement, characteristics, installation method, measurement frequency, measurement data management, and data analysis of each type were considered. In the deep soft ground improvement work where large deformation occurs, the bending deformation of the screw-type differential settlement gauge is less than that of other types of measuring instruments, so there is less risk of loss, and the reliability of data is relatively high as the instruments are installed by drilling for each stratum. Since the greater the amount of high-precision settlement measurement data, the higher the settlement analysis precision. It is necessary to manage with higher criteria than the measurement frequency suggested in the standard specification. For the data management of the differential settlement gauge, it is desirable to create graphs of the settlement and embankment height of the relevant section over time, such as surface, differential, and settlement of pore water pressure gauge for each point. In the case of multi-layered ground with different compression characteristics, it is more appropriate to perform settlement analysis by calculating the consolidation characteristics of each stratum using a differential settlement data.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.5B
• /
• pp.559-573
• /
• 2008

In this study, we newly proposed 3-D nonlinear wave driver utilizing the Navier-Stokes Eq. the numerical integration of which is carried out using SPH (Smoothed Particle Hydrodynamics), an internal wave generation with the source function of Gaussian distribution and an energy absorbing layer. For the verification of new 3-D nonlinear wave driver, we numerically simulate the sloshing problem within a parabolic water basin triggered by a Gaussian hump and uniformly inclined water surface by Thacker (1981). It turns out that the qualitative behavior of sloshing caused by relaxing the external force which makes a free surface convex or uniformly inclined is successfully simulated even though phase error is visible and an inundation height shrinks as numerical simulation more proceeds. For the more severe test, we also simulate the nonlinear shoaling and refraction over uniform beach of wedge shape. It is shown that numerically simulated waves are less refracted than the linear counterpart by Hamiltonian ray theory due to nonlinearity, energy dissipation at the bottom and side walls, energy loss induced by breaking, and the hydraulic jump occurring when breaking waves encounter a down-rush by the preceding wave.

• Animal Bioscience
• /
• v.35 no.10
• /
• pp.1575-1584
• /
• 2022

Objective: An experiment was conducted to evaluate the effects of partially replacing soybean meal (SBM) with sunflower meal (SFM) with added exogenous multienzymes (MEs) on various biological parameters in broilers. Methods: One week-old, 400 broiler chicks were randomly divided into four treatments (control, 3SFM, 6SFM, and 9SFM) with 5 replicates/treatment (20 chicks/replicate). Control diet was without SFM and MEs, while diets of 3SFM, 6SFM, and 9SFM treatments were prepared by replacing SBM with SFM at levels of 3%, 6%, and 9%, respectively, and were supplemented with MEs (100 mg/kg). Feeding trial was divided into grower (8 to 21 day) and finisher phases (22 to 35 day). External marker method was used to measure the nutrient digestibility. At the end of trial, twenty birds (one birds per replicate) with similar body weight were slaughtered for samples collection. Results: No significant effect of dietary treatments was found on all parameters of growth performance and carcass characteristics, except relative weight of bursa. Weight (25.0 g) and length (15.80 cm) of duodenum were significantly (p<0.05) higher in 3SFM than control. Lowest (p<0.05) villus height/crypt depth ratio was found in 3SFM and 9SFM than control. Most of meat quality parameters remained unaffected, however, highest pH of breast meat (6.16) and thigh meat (6.44) were observed in 9SFM and 3SFM, respectively. Lowest (p<0.05) cook loss of thigh meat was found in 6SFM (31.76%). Ileal digestibility of crude protein was significantly (p<0.05) higher in 3SFM (72.35%) than control (69.46%). In addition, amylase (16.87 U/mg) and protease (85.18 U/mg) activities were significantly (p<0.05) higher in 3SFM than control. However, cecal microbial count remained unaffected. Conclusion: Partial replacement (up to 9%) of SBM with SFM, with added MEs can help to improve the nutrient digestibility, intestinal morphology, and digestive enzyme activities without affecting cecal microbial count and growth performance in broilers.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.12 no.2
• /
• pp.121-127
• /
• 2024

In this study, the applicability of replacing DG(Desulfurized Gypsum) from oil refinery with CCCMs(Carbon dioxide Conversion Capture Materials) as an ALC(Auto-claved LIghtweight Concrete) raw material was examined, and basic properties of ALC was measured. The main chemical components of DG and CCCMs were CaO and SO₃, and an increase in LOI(Loss of ignition) due to mineral carbonation reaction was verified. The crystalline phases of CCCMs were CaCO₃, CaSO₄, Ca(OH)₂, and CaSO₄·2H₂O. When DG, a raw material for ALC production, was replaced with CCCMs, foaming height, pore shape, absolute dry gravity, and compressive strength results measured similar for all binders. In addition, the formation of tobermorite which is main crystalline phase of ALC was shown for all specimens in microstructural analysis.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.31 no.3
• /
• pp.1-11
• /
• 2013

In this study, based on a natural monument forest research by Camellia japonica L. Forest appointed as a natural monument located environment and growth environment and the soil environment, Camellia japonica L. Forest soil in order to analyze effects of soil in Camellia japonica L. Forest correlation analysis the results can be summarized as follows: First, a natural monument Camellia japonica L. forest located on the foot of a mountain valley or within the stream, a lot of sunshine southeast, east, and south in the direction of the share due to external factors, making it a good, but, $15{\sim}30^{\circ}$ of distributed in the soil slopes in the slope there is a risk of loss are appearing. Second, the growth of the Status of Camellia japonica L. forest represents the distribution of the uneven-aged forest diameter class. but increases the density of the upper forest trees Camellia japonica L. occurred in lower saplings do not have growth. The width of crown diameter class caused a narrow oppressed tree, the average tree height in the 8.09m, camellia in common was lower than that of tree height, variation diameter class in the width of crown distribution severe low correlations were analyzed. Third, the natural monument Camellia japonica L. forest soil composition, properties of soil pH, etc. 10 entries were analyzed components of the soil. In summary analysis properties of soil, soil pH, calcium, organic matter, magnesium was good and potassium content was insufficient, nitrogen and phosphorus were excess. Fourth, the growth condition of Camellia japonica L. forest and soil physicochemical properties, the results of the correlation analysis. magnesium, calcium, nitrogen affects the growth of Camellia japonica L. forest. Other seven kinds of items showed no effect on growth. Current Status and Future Growth of Camellia japonica L. forest soil and soil environments as well as the relationship between, Camellia Forest Factors affecting the growth of the state in terms of long-term ecological research and conservation status of settled Camellia japonica L. forest research for building materials there will be continued.

• Journal of Biomedical Engineering Research
• /
• v.25 no.3
• /
• pp.171-182
• /
• 2004

This study investigates the biomechanical efficacies of vertebroplasty which is used to treat vertebral body fracture with bone cement augmentation for osteoporotic patients using image and finite element analysis. Simulated models were divided into two groups: (a) a vertebral body, (b) a functional spinal unit(FSU). For a vertebral body model, the maximum axial displacement was investigated under axial compression to evaluate the effect of structural integrity. The stiffness of each FE model simulated was normalized by the stiffness of intact model. In the case of FSU model, 3 types of compression fractures were formulated to assess the influence on spinal curvature changes. The FSU models were loaded under compressive pressure to calculate the change of spinal curvature. The results according to the various factors suggest that vertebroplasty has the biomechanical efficacy of the increment of structural reinforcement in a patient who has relatively high level of BMD and a patient with the amount of 15％, PMMA injection of the cancellous bone volume. The spinal curvatures after compression fracture simulation vary from 9$^{\circ}$ to 17$^{\circ}$ of kyphosis compared to that the spinal curvature of normal model was -2.8$^{\circ}$ of lordosis. These spinal curvature changes cause the severe spinal deformity under the same loading. As the degree of compressive fracture increases the spinal deformity also increases. The results indicate that vertebroplasty has the increasing effect of the structural integrity regardless of the amount of PMMA or BMD and the restoration of decreased vertebral body height may be an important factor when the compressive fracture caused the significant height loss of vertebral body.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.29 no.3
• /
• pp.211-216
• /
• 2009

Approximately 43 million tons of livestock manure (LM) are produced each year on Korean farms. LM can be utilized as a valuable resource and/or it can contaminate water by runoff and leaching through the soil, when LM has been thoughtlessly applied to the land and directly discharged into the water. This experiment was carried out to investigate the effect of no-till system and LM application on dry matter (DM) yield of silage corn and $NO_3$-N concentration in leaching water of lysimeter installed in the experimental field. The treatments were replicated three times in split plot design. Main plots consisted of tillage systems, such as conventional tillage (CT) and no-tillage (NT). Sub plots consisted of the type of LM, such as chemical fertilizer (CF), composted cattle manure (CCM) and composted swine manure (CSM). The control plots were fertilized as commercial chemical fertilizer. DM yields of corn increased significantly in order to CF > CCM > CSM (p<0.05). DM yield of corn in CT increased as comparing with that of corn in NT. Plant height, ear height and stem diameter also increased in order to CF > CCM > CSM. In addition, the root weight in CT was increased as comparing with that of corn in NT. However, there was no interaction effects of between type of LM and tillage system. $NO_3$-N concentration in leaching water of LM application was less than 10 ppm, but $NO_3$-N concentration in CF exceeded 10 ppm which is safety level of drinking water during summer time (rainfall season).