• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.32 no.5
• /
• pp.430-435
• /
• 2006

Purpose : The aim of this study was to investigate healed bovine bone particles ($Bio-Oss^{(R)}$) and absorbable collagen sponge ($CollaPlug^{(R)}$) applied extraction socket site at 4-6 months' post-extraction. Material and methods : From August, 2004 to October, 2005, 17 sockets in 5 adult patients were selected out of the patients whose received ridge preservation using bovine bone particles and absorbable collagen sponges at Dept. of oral and maxillofacial surgery in Samsung Medical Center. There were 5 male patients, ages 30 to 58 years. Immediate postoperation and 4-6 months after operation study models were compared to evaluate the ridge dimension by measuring vertical height and horizontal width of alveolar ridge. Results : The measurements at 4-6 months revealed, in the ridge dimension, a loss of vertical height of 0.91${\pm}$0.40mm and horizontal width of 1.25${\pm}$0.58mm. There was no adverse reaction. Conclusion : This study suggests that treatment of extraction sockets with graft materials and collagen sponges is valuable in preserving alveolar bone in extraction sockets and preventing alveolar ridges defects.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.13 no.2
• /
• pp.211-218
• /
• 1993

Landslides, failure of slope stability by natural or artificial factors, occur loss of life and properties. Recently, statistical methods and field measurements are used to a study for prediction of landslide harzard area, but there are so many difficulties to find the occurence system because of its complexity. In this study, authors choose the model area where occured landslides to predict the landslide hazard. Authors made a database of ground height to compare the each topography by scale of 1 : 25,000, 1 : 10,000, 1 : 5,000 and 1 : 1,200. Authors predict to landslide hazard area by the weight of ground height data and slope angle data. Finally, authors could know the possibility of prediction to find the landslide hazard partly.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.28 no.7
• /
• pp.879-886
• /
• 2004

A numerical optimization has been carried out to determine the shape of the three-dimensional channel with oblique ribs attached on both walls to enhance turbulent heat transfer. The response surface based optimization is used as an optimization technique with Reynolds-averaged Navier-Stokes analysis of fluid flow and heat transfer. Shear stress transport (SST) turbulence model is used as a turbulence closure. Numerical results fur heat transfer rate show good agreements with experimental data. four dimensionless variables such as, rib pitch-to-rib height ratio, rib height-to-channel height ratio, streamwise rib distance on opposite wall to rib pitch ratio, and the attack angle of the rib are chosen as design variables. The objective function is defined as a linear combination of heat-transfer and friction-loss related coefficients with a weighting factor. D-optimal method is used to determine the training points as a means of design of experiment. Sensitivity of the objective parameters to each design variable has been analyzed. And, optimal values of the design variables have been obtained in a range of the weighting factor.

• Journal of Positioning, Navigation, and Timing
• /
• v.10 no.3
• /
• pp.229-234
• /
• 2021

In this paper, a study was conducted on the power amplifier control required to design an eLoran transmitter system using a low-height antenna. The eLoran transmitter developed during the eLoran technology development project conducted in Korea used a small 35 m antenna due to the difficulty of securing a site for antenna installation. This antenna height is very low compared to the height of 750 m which is required for eLoran 100 kHz signal transmission without any radiation loss. In the case of using such a small antenna, not only the radiation efficiency of the transmission is lowered, but also the power module control must be performed more precisely in order to transmit the eLoran standard signal. The equivalent RLC circuit of the transmitter system was implemented and transient analysis was conducted to derive the input required voltage for satisfying the output requirement. The voltage waveform was also generated by the RLC circuit analysis to generate the eLoran signal. Furthermore, we suggest power width modulation method to control eLoran power amplifier module more sophisticatedly.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2002.10a
• /
• pp.361-364
• /
• 2002

This paper discusses the influencing factors such as coring position, height to diameter ratio of core specimen(h/d) and coring torque on the strength estimation of concrete by small site coring method in order to verify the validities of small size core method. According to results, as for the influence of drilling position, when core specimens are obtained from the place parallel to placing direction, compressive strength of core specimens are higher than those perpendicular to placing direction. This is due to the loss of the area of core specimen perpendicular to plating direction by bleeding. And in case of $\phi$ 24mm core specimen, when vertical drilling against placing direction is taken. compressive strength of core specimen obtained at the bottom of the structure is higher than that at the top of the structure. As for the influence of height to depth ratio, as h/d ratio increases compressive strength shows to be decreased. As for the influences of rotation speed of drilling machine, as its speed goes up, compressive strength decreases, regardless of core diameter.

• Journal of Korean Foot and Ankle Society
• /
• v.16 no.2
• /
• pp.79-86
• /
• 2012

Calcaneal fractures account for 2% of all fractures and approximately 60 to 70% of tarsal fractures. These fractures typically are the result of high-energy injury, such as a motor vehicle accident or a fall from a height. The potential for disabling malunion following intrarticular displaced calcaneal fracture is high, regardless of treatment. Fracture displacement typically results in loss of hindfoot height, varus and widening of the hindfoot, with possible subfibular impingement and irritation of the peroneal tendon and/or sural nerve. Frequently, subtalar joint develops posttraumatic arthritis. In symptomatic patients with calcaneal malunion, systemic evaluation is required to determine the source of pain. Nonsurgical treatment, such as activity and shoe modification, bracing, orthoses, and injection, is effective in many patients. Surgical treatment may involve simple ostectomy, subtalar arthrodesis with or without distraction, or corrective calcaneal osteotomy. A high rate of successful arthrodesis and of patient satisfaction has been reported with surgical manamgent.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2005.11a
• /
• pp.245-248
• /
• 2005

In this paper, small sized half-wavelength circular loop antenna which attached beneath a visor of helmet is designed and fabricated at the resonant frequency of 449MHz. To reduce the size of the antenna, double series-shorted stubs are inserted inside the loop for practical use of a vacant space of loop inside. Also, It is designed for the printed type to install the helmet easily. The size of antenna on helmet is reduced to 87.75%(diameter : 70mm, height :.36mm) compare with general type antenna(diameter : 200mm height 101mm). The return loss, -10dB bandwidth and gain are -13.2dB, 17.6MHz(3.9%), and -1.78dBd. And, radiation pattern is omni-directional pattern at H-plane. Therefore, it can be seen that the half-wavelength circular loop antenna using double series-shorted stubs is proper structure for the miniaturization and the installed antenna of the helmet.

• 한국연소학회:학술대회논문집
• /
• 2004.06a
• /
• pp.112-117
• /
• 2004

The effects of laser heating on soot formation and oxidation of propylene diffusion flames have been studied experimentally under nearly sooting conditions. The non-sooting flame can be converted to a sooting flame when the laser light heats up a flame at 7 mm height, while a sooting flame can be changed to a non-sooting flame when a flame is heated with laser light at flame height of 13 mm. The selective heating at the soot formation and/or oxidation region determines the sooting behavior of a diffusion flame. The increased soot/flame temperatures are most likely to be responsible for both the decreased and increased soot formation/oxidation.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2011.05b
• /
• pp.133-136
• /
• 2011

This study concerned with the steel beam of bonding method and bonded steel beams by this method and both ends of different height, steel beams and steel beams in the center makes the junction. Both ends and the central part of steel beams connecting the lower flange by additional combining steel plates to convey stress, the stress to focus on the beam connections are passed to both ends of steel beams, and strength of beam connections is improved and steel structural beams is proposed to minimize the loss by Incision. If you use the developed method, the construction period is shortened, and reducing the amount of material can decrease the cost and reduction in floor height can be maximized business feasibility.

• Journal of computational fluids engineering
• /
• v.15 no.3
• /
• pp.16-23
• /
• 2010

Shape optimization of an upper plenum of a PBMR type gas cooled nuclear reactor has been performed by using three-dimensional Reynolds-Averaged Navier-Stokes (RANS) analysis and surrogate modeling technique. The objective function is defined as a linear combination of uniformity of flow distribution in the core and pressure drop in the upper plenum and the core. The ratio of thickness of slot to diameter of rising channels, ratio of height of upper plenum to diameter of rising channels, and ratio of height of the slot at inlet to outlet, are used as design variables for optimization. Design points are selected through Latin-hypercube sampling. The optimal point is determined through surrogate-based optimization method which uses 3-D RANS analyses at design points. The results show that the optimum shape represent remarkably improved performance in flow uniformity and friction loss than the reference shape.