• Korean Journal of Agricultural and Forest Meteorology
• /
• v.1 no.2
• /
• pp.97-102
• /
• 1999

This study was conducted to compare seasonal changes of height, diameter at root collar, biomass and chlorophyll contents of Abies holophylla seedlings grown in Sangju National University Nursery under different light intensities. Four light intensities were adopted using nylon net such as 100% sunlight(1800 $\mu$㏖ m$^{-2}$ s$^{-1}$ ), 75% of sunlight (1350 $\mu$㏖ m$^{-2}$ s$^{-1}$ ), 50% of sunlight (900 $\mu$㏖ m$^{-2}$ s$^{-1}$ ) and 25% of sunlight (450 $\mu$㏖ m$^{-2}$ s$^{-1}$ ). Planting density in four light intensities was 30 cm$\times$30 cm. In each treatment, 100 trees were planted and height, diameter at root collar, biomass and chlorophyll contents were measured. The highest height, diameter at root collar and biomass in Abies holophylla seedlings were observed at 100% full sunlight. Lowest chlorophyll contents (Chlorophyll a, b and total) were shown at 25% of sunlight, lowest light intensity treatment in this study. Growths and chlorophyll contents of Abies holophylla seedlings were strongly associated with light intensity. Photosynthesis has to be investigated in near future because photosynthesis and chlorophyll contents were strongly related to tree growth with long periods.

• Journal of Forest and Environmental Science
• /
• v.39 no.1
• /
• pp.20-26
• /
• 2023

Cow pea (Vigna unguiculata) was intercropped with Ziziphus spina-christi as summer forage in two consecutive seasons of 2017 and 2018. The aims to find out suitable agroforestry practice for saline soils of Khartoum State. And to investigate effect of tree spacing on forage biomass yield under semi -irrigated systems. Completely randomized block design with 3 replicates was conducted for this trial. Thus Z.spina-christi that fixed at 4×4 m was intercropped with cowpea at 1 m and 1.5 m spacing from trees trunk. Tree growth parameters were measured in terms of tree height, tree collar diameter, tree crown diameter and fruit yield per tree. While crop were parameters were determined in terms of plant height, number of plant, forage biomass yield per ha and land equivalent ratio. Soil profile of 1×1 m and 1.5 m depth was excavated and its features were described beside its chemical and physical properties were analyzed for 0-10 cm, 0-30 cm, and 30-60 cm and 60-100 cm layers. The results revealed that soil pH, CaCO₃, SAR, ESP, and EC ds/m were increased by increasing soil depths. Meanwhile tree growth in terms of tree height was significant in the first season 2017 when compared with tree collar diameter and tree crown diameter. Also significant differences were recorded for tree growth when compared with sole trees in the second season in 2018. Tree fruit showed marked variations between the two seasons, but it was higher under intercropping particularly at ZS2. Crop plant height was highly significant under sole cropping than intercropping in first season in 2017. In contrast forage biomass yield was significant under intercropping in ZS1 and ZS2 treatments. Land equivalent ratio was advantageous under this agroforestry system particularly under ZS2. Thus it recorded 5 and 9 for ZS2 in the two consecutive seasons respectively. Therefore, it is feasible to introduce this agroforestry system under such arid lands to provide summer forage yield of highly nutritive value and low cost for animals feed as well as to increase farmers' income and to halt desertification and to sequester carbon.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2002.10a
• /
• pp.705-712
• /
• 2002

Geotextile tube is environmentally sustainable technology and has been applied in hydraulic and coastal engineering applications. Geotextile tube is composed in permeable fabrics and Inside dredged materials, and hydraulically or mechanically filled with dredged materials. These tube are generally about 1.0m to 2.0m in diameter, through they can be sized for any application. The tubes can be used solely, or stacked to add greater height and usability. Stacked geotextile tubes will create by adding the height necessary for some breakwaters and embankment, therefore increasing the usability of geotextile tubes. This paper presents the hydrodynamic behavior of stacked geotextile tube by hydraulic model tests. The hydraulic model test conducted by structural condition and wave conditions. Structural condition is installation direction to the wave(perpendicular band 45$^{\circ}$), and wave condition is varied with the significant wave height ranging from 3.0m to 6.0m. Based on the test results, the hydrodynamic behaviors such as structural stability, wave control capacity, and strain are interpreted.

• Journal of Technologic Dentistry
• /
• v.26 no.1
• /
• pp.69-76
• /
• 2004

The objective of this finite element method study was to analyze the stress distribution induced on a supporting bone by 3.75mm, 4.0mm, 5.0mm diameter of dental implant fixture(13mm length). 3-dimensional finite element models of simplified gold alloy crown(7mm height) and dental implant structures(gold cylinder screw, gold cylinder, abutment screw, abutment, fixture and supporting bone(cortical bone, cancellous bone) designs were subjected to a simulated biting force of 100 N which was forced over occlusal plane of gold alloy crown vertically. Maximum von Mises stresses(MPa) under vertical loading were 9.693(3.75mm diameter of fixture), 8.885(4.0mm diameter of fixture), 6.301(5.0mm diameter of fixture) and the highest von Mises stresses of all models were concentrated in the surrounding crestal cortical bone. The wide diameter implant was the good choice for minimizing cortical bone-fixture interface stress.

• Asian-Australasian Journal of Animal Sciences
• /
• v.24 no.4
• /
• pp.449-456
• /
• 2011

Eighteen different biometric traits in 407 Kankrej cows from their breeding zone, i.e. Palanpur district of Gujarat, India, were recorded and analyzed by factor analysis to explain body conformation. The averages of body length, height at withers, height at shoulder, height at knee, heart girth, paunch girth, face length, face width, horn length, horn diameter, distance between horns, ear length, ear width, neck length, neck diameter, tail length with switch, tail length without switch and distance between hip bones were $123.44{\pm}0.37$, $124.49{\pm}0.28$, $94.68{\pm}0.30$, $38.2{\pm}0.14$, $162.56{\pm}0.56$, $178.95{\pm}0.70$, $44.09{\pm}0.10$, $15.91{\pm}0.05$, $42.47{\pm}0.53$, $26.07{\pm}0.19$, $13.34{\pm}0.08$, $31.24{\pm}0.12$, $16.10{\pm}0.05$, $50.63{\pm}0.18$, $73.21{\pm}0.32$, $111.62{\pm}0.53$, $89.34{\pm}0.34$ and $17.28{\pm}0.10\;cm$, respectively. The correlation coefficients between different traits ranged from -0.806 (horn diameter and distance between horns) to 0.815 (heart girth and paunch girth). Most of the correlations were positive and significant. Factor analysis with promax rotation with power 3 revealed three factors which explained about 66.02% of the total variation. Factor 1 described the cow body and explained 38.89% of total variation. The second factor described the front view/face of the cow and explained 19.68% of total variation. The third factor described the back of the cow and explained 7.44% of total variation. It was necessary to include some more variables for factor 3 to obtain a reliable estimate of the back view of the cow. The lower communities shown for distance between horns, horn diameter, ear width and neck diameter indicated that these traits did not contribute effectively to explaining body conformation and can be dropped from recording, whereas all other traits are important and needed to explain body conformation in Kankrej cows. The result suggests that principal component analysis (PCA) could be used in breeding programs with a drastic reduction in the number of biometric traits to be recorded to explain body conformation.

• Journal of Korean Society of Forest Science
• /
• v.2 no.1
• /
• pp.48-51
• /
• 1962

1. The analysis of the shoot height growth of Phyllostachys edulis A. et C. Rivi$\acute{e}$re which stand is growing at the middle part of South Korea is presented in the present paper. The shoot height was carefully measured twice a day, 10 am and 4 pm. With this, six hours from 10 am to 4 pm is regarded as day-time-length and 18 hours of the rest as night-length. 2. The measurement were made in 1954. The very young shoots were classed into three diameter groups basing at the ground surface level to see the the afterwards influences of shoot size on height growth. 3. The hourly mean height growth in day time was higher than that in night time. The standard deviations and coefficients of variations of the daily growth of the shoot are presented in Figures 2 and 3 respectively. 4. The hourly mean height growth of the shoot by diameter groups and by day and night period are presented in Fig. 4 and 5 respectively. 5. The growth percentages of the shoot by diameter groups and by day and night is graphed in Fig. 6.

• Journal of Forest and Environmental Science
• /
• v.30 no.1
• /
• pp.101-106
• /
• 2014

The purpose of this research was to figure out the stand structure and growth characteristic with relation to DBH, height, and volume in sixteen Pinus koraiensis plantations of Gangwon province region. Age class was diversely distributed from age class II (16 yr) to age class VIII (77 yr), and, in terms of site index, sixteen regions were superior: nine regions 'high', seven regions 'middle'. The distribution of DBH by sites appeared a bell-shaped curve, and the number of trees was the most in diameter section of 18-22 cm. The dispersion of DBH was various with age and widest ranging from 18 cm to 58 cm in age class VII-VIII. The distribution of height was also a bell-shaped curve with the smaller deviation than the distribution of DBH, and most of trees were in height section of 14-18 m. The correlation of DBH and height was high (r=0.75), and the volume bigger than 1.0 $m^3$ was presented from DBH 35 cm, height 20 m.

• Journal of Forest and Environmental Science
• /
• v.31 no.1
• /
• pp.47-54
• /
• 2015

The study was performed to analyze the growth of the red pine (Pinus densiflora) in the Eastern Region of Korea. Stem profile data from a total of 8 dominant trees of which each tree represents its site were collected and used for the analysis. The stem volumes were calculated using Smalian's formula and much higher than the ones by Korea Forest Research Institute in larger than dbh 40 cm. The total bark volumes were more proportionally related to dbh and stem volume than to height and age. The bark thickness and volume decreased as relative height increases but increased as relative dbh increased. The average PAI of dbh and height reached the highest at 0.8 cm/yr (age 15) and at 0.45 m/yr (age 30) respectively, while the average PAI of volume steadily tended to increase up to age 80. The growth percentages of dbh, height and volume tended to decrease with age and volume growth percentage was higher than dbh and height.

• Journal of Korean Society of Forest Science
• /
• v.90 no.4
• /
• pp.445-449
• /
• 2001

The objective of this study was to develop a new technique to control crown form of Hiscus syriacus to be used for an upright street tree with a single stem. Fertilization and raising the clear-bole length were the main treatments to compare the diameter and height growth of this species. The trees maintained with clear-bole length of 100, 150, and 200cm showed diameter growth of 15.7. 13.8, and 10.8mm, respectively, indicating the reduced diameter growth of trees with increasing clear-bole length, which is known as a typical characteristics in tending trees in silviculture. The effects of fertilization was not shown in this study. At the end of the two-year study from 1999 to 2,000, optimum diameter growth was obtained with the treatments of clear-bole length of 80-120cm, or 121-150cm. It is concluded that height and clear-bole length should be considered first in raising Hibiscus syriacus for street trees. Further study may be needed to obtain the effects of fertilization and raising the clear-bole length on uprightness of this species.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.30 no.2
• /
• pp.82-94
• /
• 1988

The purpose of this study is to introduce the Double Punch test method which is an indirect testing method of tensile strength of concrete, and to compare with the tensile strength of concrete as determined by the split-cylinder test, a practical method for performing the Double Punch test to obtain the tensile strength of concrete is proposed and recommended for general use. In this study, the dimensions of cylindrical specimens used in the Double-Punch test were 15X30cm, 15X15cm, 10${\times}$(20cm, and 5${\times}$l0cm, and in the split-cylinder test were 15${\times}$(30cm, 15${\times}$(15cm, and 10${\times}$(20cm. And the diameters of loading punches used in the Double-Punch test were 1.5cm, 2.5cm, and 3.5 cm. The results obtained from tests are summarized as follows ; 1. In the split-cylinder test, the tensile strength of concrete by the linear elasticity theory is similar to that of plasticity theory. 2. Both split-cylinder test and Double-Punch test, tensile strength of concrete is increased with decreasing specimen size. This tendency is identical when the ratio of specimen diameter to height is 1: 2, but that tendency is quite different when the ratio is 1: 3. In the Double-Punch test, if specimen size is constant, by increasing the punch size, tensile strength of concrete is increased, too. 4. Using a 15 ${\times}$( 15 cm cylinder specimen and 3.5 cm diameter punch in the Double Punch test would give the most uniform and consistent result in tensile strength, and the result showed a gQod correlation with splitting tensile strength from 15 x 30cm specimen. 5. In order to obtain satisfactory results and to nuninuze variability, it is proposed that specimens of 15 cm in diameter and 15 cm in height with two 3.5 cm diameter punches should be used. It seems, therefore, reasonable tt) take f't=0.0024 P(kg / cm$^2$) as a working formula for computing the tensile strength in the Double Punch test for concrete.