• The Journal of Korean Physical Therapy
• /
• v.32 no.1
• /
• pp.29-33
• /
• 2020

Purpose: This study examined the effects of the weight-bearing pattern and calcaneal taping on the heel width and plantar pressure in standing. Methods: Fifteen healthy subjects with normal feet participated in this study. The heel width was measured using a digital caliper, and a pedoscan was used to measure the plantar pressure of the rear foot while standing. The participants were instructed to stand in three weight-bearing patterns (anterior, middle, and posterior weight bearing) before and after calcaneal taping. The heel width and plantar pressure were measured three times before and three times after calcaneal taping, with the three weight-bearing patterns applied in random order. A 2 (non-taping vs. taping) × 3 (anterior, middle, posterior weight bearing) two-way repeated ANOVA with a Bonferroni post hoc correction was used to assess the differences in heel width and plantar pressure. Results: The results revealed a significant main effect of the weight-bearing pattern (p<.01), but not of calcaneal taping (p>.05). Greater weight bearing applied to the heel resulted in a significantly increased heel width and planter pressure of the rear foot (p<.01). Conclusion: In standing, a posterior weight-bearing pattern increases the heel width due to side-to-side shifting of the plantar heel pad, which increases the heel plantar pressure. Therefore, to prevent high stress on the heel pad and plantar heel pain, it is important to refrain from posterior weight bearing while standing during the activities of daily living.

• Korean Journal of Veterinary Research
• /
• v.37 no.3
• /
• pp.525-532
• /
• 1997

The hoof parameters - hoof angle, toe length, heel length, hoof width, hoof length, heel width, hoof circumference - of 1372 Thoroughbred racehorses in Seoul racecourse were measured. Each parameter was compared with the racing time. The parameters were as follows: fore hoof angle $50.1{\pm}0.09^{\circ}$, hind hoof angle $50.1{\pm}0.08^{\circ}$; fore toe fength $82.8{\pm}0.21mm$, hind toe length $88.8{\pm}0.23mm$; fore heel length $28.6{\pm}0.19mm$, hind heel length $24.5{\pm}0.19mm$; fore hoof width $130.9{\pm}0.30mm$, hind hoof width $125.7{\pm}0.28mm$; fore hoof length $133.3{\pm}0.22mm$, hind hoof length $28.1{\pm}0.22mm$; fore heel width $61.2{\pm}0.32mm$, hind heel width $67.9{\p}0.35mm$; fore hoof circumference $264.2{\pm}0.48mm$, hind hoof circumference $253.8{\pm}0.40mm$. Apart from the hoof angle, the hoof parameters increased in proportion to the body weight. The parameters of forelimbs affected the racing time more than those of hindlimbs. The correlation between hoof parameters and racing time was shown more in short-distance race (1000M) than in long-distance race(2200M). The parameters that had correlation with racing time were hoof width, hoof length, heel width of forelimbs and heel width of hindlimbs.

• Fashion & Textile Research Journal
• /
• v.15 no.3
• /
• pp.414-422
• /
• 2013

This study identifies the foot shapes of elderly men by classifying foot types according to the shapes of sole of foot and analyzing individual characteristics. The subjects were 269 elderly men over 60 years of age. Their right feet were measured indirectly with a 2D scanner. The anthropometric measuring items consisted of 38 items that were estimated on the right foot of each subject. The 2D scan data were analyzed by various statistical methods such as factor analysis, ANOVA and cluster analysis using the statistical program SPSS 19.0. A total of 8 factors were extracted through a factor analysis and these factors represent 77.83% of total variance. The 8 factors were: ball and lateral foot protrusion, ball gradient, medial foot protrusion, anterior and posterior foot length ratio, lateral ball length, heel size, toes breadth, and foot length, that explained 77.83% of the total variance. A total of 4 clusters (as their sole type) were categorized using 8 factor scores by cluster analysis. Type 1 was classified as H-type(toes width, foot width, heel width uniform and medial malleolus and lateral malleolus almost no protrusion). Type 2 was classified as V-type(foot width and toes width, wide and heel width narrow). Type 3 was classified as A-type(foot width and heel width, wide but toes width narrow, protruded inside). Type 4 was classified as D-type(protruded outside).

• Journal of the Korean Society of Clothing and Textiles
• /
• v.10 no.2
• /
• pp.21-28
• /
• 1986

This paper is concerned with the mutual relationship among interpressure, last. foot within a new shoe and foot within a fifty-hour-used shoe at the standing posture at three different heel-heights 1. The interrelationship between the heel-heights and interpressure is very significant at the level of $0.1\%$. The heel-heights cause high interpressure at different parts of foot; heel point and big toe point in a 3 cm-heel shoe, big toe point and heel outside joint point in a 5 cm-heel shoe, and little toe point, heel-outside joint point, and arch point in a 7 cm-heel shoe. 2. Foot girth and foot width measurements either within a new shoe or within a fifty-hour-used shoe significant at the level of $5\%,\;1\%,\;0.1\%$ and show discrepancies at three different heel heights; the part between instep and ball joint in a 3 cm-heel shoe, toe part in a 5 cm-heel shoe, heel-inside joint. heel-outside joint and toe part in a 7 cm-heel shoe are highly influenced by heel heights. The higher the shoe-hee15 are, the more heavily the fore part of foot is pressured in lateral direction because shoe is made to have high instep from a fashion viewpoint. Higher shoe heels prevent weight pressure from being concentrated on heel. If shoe heels are toe high, people in such shoes feel easily tired. It is very worthy of note in selecting shoes to consider not only the shoe fashion but also fore shoe type, heel height, and shoe material with proper elasticity.

• Journal of the Korean Society of Physical Medicine
• /
• v.14 no.3
• /
• pp.21-27
• /
• 2019

PURPOSE: This study examined the changes in the kinematic variables during walking on a downhill ramp according to the shoe heel height. METHODS: The subjects were 10 adult women with no history of musculoskeletal disorders who agreed to participate in the study. Data were collected using a motion analysis system (VICON) consisting of six infrared cameras. The slope was 120 cm in width, 200 cm in length, and 15 in inclination. To confirm the change in gait parameters (stride length, gait speed) and lower extremity joint angle according to the heel heights of the shoes, flat, 5 cm, and 10 cm heel shoes were prepared and walked alternately. RESULTS: As a result, both the stride length and walking speed showed significant differences according to the heel height between flat and 10 cm (p<.05). In the sagittal plane, there was no significant difference in the hip joint and knee joint, but a significant difference was observed in all events in the ankle joint on all heel heights (p<.05). In particular, the heel strike and mid stance events showed significant differences among all height conditions (p<.05). No significant difference was observed in any of the joint angle changes in the frontal plane (p>.05). CONCLUSION: As the shoe heel height increased, the instability increased and efforts to secure the stability were made, leading to a shortened stride length, walking speed, and angle of the ankle joint.

• Korean Journal of Applied Biomechanics
• /
• v.16 no.1
• /
• pp.19-30
• /
• 2006

The purpose of this study was to examine the effect of foot orthotics on the overall comfort and muscle activity during running. The subjects were 10 members from the joggers' club which consisted of 2 women and 8 men. These individuals ran on the treadmill by 4.0m/s speed with and without the custom foot orthotics. The data concerning the overall comfort was collected by a questionairre that examined the overall comfort, heel cushioning, forefoot cushioning, medio-lateral control, arch height, heel cup fit, shoe heel width, forefoot width, and shoe length The MegaWin ver. 2.1(Mega Electronics lid, Ma. Finland) was used to gain electromyography signals of the muscle activity; Tibialis anterior, medial gastronemius, lateral gastronemius, vastus lateralis, vastus medialis, biceps femoris, and rectus femoris were measured. The results of the study were as follows. 1. During running the overall comfort was higher for the foot arthotic condition than the nonorthotic condition. Among the inquiries the overall comfort showed the biggest difference comparing the two conditions. and the shoe heel width showed the highest score for contort. 2 The muscle activity of the biceps femoris, and vastus lateralis in the stance period decreased. due to the foot orthotics. The muscle activity of the vastus medialis in the swing period also decreased and the muscle activity tibialis anterior in the stance and swing stance decreased as well During running, orthotics showed positive result in foot comfort. The foot comfort related to decreased stress, muscle activity, and foot arch strain. Overall comfort and the adequate decrease of muscle activity were associated with injury prevention and the best method to prevent injury semms to be the maintenance of foot comfort.

• Journal of the Ergonomics Society of Korea
• /
• v.16 no.2
• /
• pp.61-71
• /
• 1997

In industrial designing of ready-to-wear shoes, one important factor to consider is that the population has diverse fooot shapes as well as foot length. The general shape of a foot could be represented by "foot ratio", i.e. the ratio of width to length. In this study, we measured several dey aspects of young Korean men's foot, and compared the results with their shoe sizes and general foot shapes. To this end, 172 male subjects were categorized according to their shoe size (small, medium, large) or foot ratio (wide, narrow, intermediate). The statistics of this survey indicated that the people with narrow foot shap have significantly greater foot length compared with the one having wide foot shape. Conversely, subjects having wide foot shape manifested significantly greater foot and ankle girth as well as significantly greater foot breadth. However, different foot shape groups showed no significant differences in heel width, heel ankle girth, instep height, and malleolus height. On the other hand, subjects wearing larger shoe size showed significantly larger foot measurements except instep and ankle heights, whereas subjects with shoe sizes 260 and below measured significantly more narrow heel and lateral metatarsal breadths. The deviation between foot length and dress shoe size(length) was greater in groups with wide foot shape and in groups wearing large shoe sizes. The results of this survey indicated that the subjects with wide foot shape apparently choose a size or two larger shoes for them as a compromise for a better breadth fit.eadth fit.

• Korean Journal of Human Ecology
• /
• v.12 no.1
• /
• pp.75-84
• /
• 2003

The objective of this paper was to analyse the foot type of female university students by the direct and indirect measure of foot and the measures of foot outline. The results were as follow: 1. The length and the width of foot were small and ankle slender and the modification of the big toe slight. 2. The analysis on the 16 measure items revealed five factors; the first factor was related to the width and girth of foot, the second one to the length of foot, the third one to the transformation of the little toe, the fourth one to the height of foot, the fifth one to transformation of the big toe. 3. The grouping on the shape of foot revealed three types. The inline angle of foot was the smallest in average in the type 1, while it appeared to be middle in the other types. The wider foot shapes were grouped as type 2 because their inline and outline angles of foot were the biggest in average. In the type 3, the big toe was curved a lot, since it was the largest in average. 4. From the naked eye measuring method, classification from which toe was popped-out told that Egyptian foot was 30.9%, Greek foot 27.9%. On the other hand, the instrumental method showed that Egyptian foot was 57.3%, Squared foot 35.3% and Greek foot 7.4%. 5. The result from the analysis about the traits of foot shape by the degree of the arch formation of bottom foot, showed that 33.8% had the normal foot, 66.2% slightly flat foot or middle one. There was no one with rigid flat foot. 6. The shoes size they declared were that 240cm was 33.3%, 235cm 18.1% and 245cm 18.1%. The shape of their shoe heel were flat heel(34.8%), cuban heel(25.5%), and narrow straight heel(19.9%); and that of the shoe toe were round toe(25.4%), oval toe(20.4%) and squared toe(20.4%). 7. The discomforting parts when they wear shoes were the little toe(35.4%), the rear of foot(13.9%), and the width of foot(13.9%), which was related to their dislike of shoe with the pointed toe.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.19 no.4
• /
• pp.93-104
• /
• 2017

This study is a basic study to develop shoe last design technology to enhance and revitalize the competitiveness of the handmade shoes. In-depth interviews were conducted with four manufacturers in Seongsu-dong to identify the production status and design technology of shoe lasts. The result of the research is as follows. Firstly, shoe lasts for adults are produced at intervals of 5mm between 245mm-285mm for men's shoes, and between 220-260mm for women's shoes. The production rate of women's shoes was high in the order of general type, boot type, and sandal type while men's shoes mainly produce general type. Secondly, the master last size and ball girth rating for men's and women's shoes were analyzed to EE-EEE grade at 260mm and D grade at 235mm. The length of the master last for men's shoes is 276-290mm, the heel width is 60-65mm, the ball width is 88-90mm, the ball girth is 250mm, and the waist girth is 248mm. The length of the master shoe last for women's shoes is 236-245 mm, the heel width is 50-55mm, the ball width is 78-80mm, the ball girth is 211~213mm, and the waist girth is 213~215mm. Thirdly, the last grading deviation is 5mm in length, the heel width is 0.5mm, the ball girth is 3.5mm, and the ball with is 1.2mm. The ball girth dimensions of Oxford type, slip-on type, and sneakers type are made at 250mm, 248mm, and 245mm for men's shoes. For women's shoes, the ball girth dimensions of pump type, loafer & boot type, and sandal type are made at 211~213mm, 214~215mm, and 211mm. Fourthly, t+he construction of the automation system is insufficient and almost completely depends on manual production.

• Proceedings of the ESK Conference
• /
• 1997.04a
• /
• pp.297-303
• /
• 1997

This study was initiated to investigate suitability of men's dress shoe sizes made for young men. Experiments were performed on 172 men for 19 to 29 years of age. Nine dimensions were measured from the subject's right foot and 11 dimensions were measrued from the outline of the foot. The data were analyzed for six different groups. The subjects were grouped by their dress shoe size or the ratio of the foot width to foot length. The result of the experiments lead to the following conclusions: 1. Foot length, metatarsal width and heel width were significantly different among the small, medium and large dress shoe size groups. 2. No significant differences in front foot angle and the inside metatarsal width were found among the above three groups. 3. The difference between wearing shoe size and the foot length was larger for the subjects with wide foot shape.