• 한국구조물진단유지관리공학회 논문집
• /
• 제19권4호
• /
• pp.101-108
• /
• 2015

급격한 산업화와 삶의 질의 변화로 인해 생산된 고밀도 폐유리의 양은 꾸준히 증가하고 있으나 대부분 재활용되지 못하고 있다. 특히 고밀도 폐유리의 경우 불법적으로 처리되거나 매립되는 실정이다. 한편, 원전구조물의 안전성 확보를 위해 차폐 성능이 우수한 재료가 사회적으로 요구되고 있다. 콘크리트는 가장 많이 사용되고 있는 건설재료이며, 많은 양의 자원들이 콘크리트를 생산하기 위해 사용되고 있다. 따라서 고밀도 폐유리를 차폐 콘크리트 재료로 재활용할 수 있는 방안에 대한 연구가 요구되어진다. 본 연구에서는 고밀도 폐유리를 차폐 콘크리트 잔골재로의 적용가능성을 평가하였다. 결과에 따르면, 폐유리를 혼입한 모르타르의 경우, 일반 모르타르에 비하여 단위용적질량이 증가하여 차폐 성능 개선이 가능할 것으로 판단된다. 폐유리 혼입에 의해 강도는 감소하는 것으로 나타났으며, 세척의 경우보다 비세척의 경우에 강도 발현이 유리한 것으로 나타났다.

• 한국건설순환자원학회논문집
• /
• 제5권4호
• /
• pp.345-352
• /
• 2017

중량 콘크리트는 고파랑에 대한 저항성 상승을 위해 해양 구조물에 사용될 수 있다. 그러나 중량 콘크리트를 제조하기 위해 필수적인 재료인 중량 골재는 대량 공급이 어려우며, 고가이므로 사용이 제한되고 있다. 따라서 본 연구에서는 산업부산물인 동슬래그 및 제강슬래그의 해양 콘크리트용 중량 골재로써 활용성을 평가하였다. 실험 결과 동슬래그는 수침팽창 및 알칼리 실리카반응성이 안정적인 것으로 나타나 해양 콘크리트용 중량 골재로서 활용이 가능할 것으로 판단된다. 그러나 제강슬래그는 수침팽창 및 ASTM C 1260 시험에서 높은 팽창율을 보였다. 또한 콘크리트 내 제강슬래그가 위치한 곳에서 염화물 이온이 깊게 침투한 것이 발견되었다. 따라서 제강슬래그는 해양 콘크리트 구조물의 골재로서는 부적합한 것으로 사료된다.

• 한국소음진동공학회논문집
• /
• 제23권1호
• /
• pp.34-40
• /
• 2013

The 1st assessment(performance test) was applied to assure the floor impact sound performance for developing the dry double-floor with the change of rubber hardness of the upper panel's support and the ceiling structure of the sub-floor. Depends on the change of the rubber hardness in sub-structure, the heavy-weight sound impact value is improved up to 3 dB, and the light-weight sound impact value is moved up to 21 dB, comparing with the bare-slab. Also, the improved value for the floor impact sound conjugating with the sub-floor's ceiling was 5 dB. Based on this result, the 2nd assessment(performance test) was made the state that the rubber hardness of the sub-floor support was ranged between 50 and 70 for considering the stability of walking patients. In addition to this process, the assessment was carried out with a variety of ceiling structure applied to the dry double-floor structure with the air flow system on the sub-floor's ceiling. The result for the 2nd assessment proved that TYPEII-3 had the better sound reduction performance in the heavy-weight impact sound test than other types, and also for the light-weight impact sound TYPEII-3 had the 29 dB sound reduction performance overall. Henceforth, based on the result the research for the sound reduction performance from the floor impact sound shall be ongoing process as well as the development of a double-dry floor and a sound reduction ceiling to suitable on the field.

• 기술사
• /
• 제34권3호
• /
• pp.64-67
• /
• 2001

In resent the weight of structure is heavier and bigger than before. Engineers use many heavy equipments to erect buildings and bridges. The heavy equipment is very useful to lift any weight. But most engineers do not know the impact of the weight when the equipment lifts the weight. In this study one researched into the impact of the weight in the crane work which lifts the weight in the construction site. Also along the number of pulley sheave the impact of the weight was researched. From the impact field test the impact coefficient of a single pulley sheave crane was 0.65 and the four pulley sheaves crane was 0.13. The result shows that the impact coefficient of a single pulley crane is more than 5 time of the impact coefficient of the four pulley sheaves crane and that engineers must consider the impact effect of the crane work in the construction site.

• 한국정밀공학회지
• /
• 제19권1호
• /
• pp.204-211
• /
• 2002

Today\`s industrialized plants are required to reduce SOx emitted from stacks at factories, utility power stations, etc. For this purpose, flue gas desulfurization(FGD) system is installed in thermal power plant and gas-gas heater(GGH) is used to play a vital role to reheat the wet treated gas from FGD. The sector plates are located at cold and hot sides of gas-gas heater. They serve as sealing to prevent mixing treated and untreated gases. Therefore, the deformation of the sector plate due to its dead weight and gas pressure should be considered as major factor for the sector plate design. And finite element analysis(FEA) for rotor part in GGH is performed with original model and two weight-reduced models with different diaphragm thickness, respectively. Stress concentrations at rotor diaphragm happen due to the dead weight, pressure difference between treated and untreated gas, and thermal distribution in the rotor. As the thickness of diaphragm is decreased, the stress level is increased. The direction of treated gas and untreated gas flow may affect the stress level.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2013년도 춘계 학술논문 발표대회
• /
• pp.35-36
• /
• 2013

Electric arc furnace oxidizing slag from massively produced steel slag has been used in road bases and subbases, hot mix asphalt, and landfill. Electric arc furnace oxidizing slag contains iron (15%~30%) and has a high density of 3.0~3.7 ton/m3. Depending on the type and amount of concrete aggregates, the radiation-shielding characteristics can vary. Therefore, aggregates of electric arc furnace oxidizing slag can be considered for the production of radiation-shielding concrete. The experimental design of this study is experiments on Compressive strength experiments, X-ray irradiation experiments, and experiments related to the unit volume weight were carried out on hardened concrete. This experiment compared the performance evaluation of radiation shielding of concrete using electric arc furnace oxidizing slag.

• 한국소음진동공학회논문집
• /
• 제23권5호
• /
• pp.414-422
• /
• 2013

As structure-borne sound, the floor impact sound is one of the serious noises in residential building. Most of heating system applied to the typical Korean residential building is floor heating system which is called ondol. The ondol usually consists of finishing material, mortar with heating coil, light-weight aerated concrete and reinforced concrete. This study focused on the isolation of heavy-weight impact sound and modification of mortar and light-weight aerated concrete. Specifically the glass foam aggregate was added on light-weight aerated concrete. Also, water-cement ratio and amount of cement on mortar were revised. The sound pressure level of heavy-weight impact was measured in reverberation chamber using both bang-machine and impact ball. The size of specimen was 1 m by 1 m. Substitution ratio of glass foam aggregate on light-weight aerated concrete shows relationship with heavy-weight impact sound pressure level. In addition, heavy-weight impact sound pressure level was decreased with increment of water-cement ratio and amount of cement on mortar.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 춘계학술대회논문집
• /
• pp.308-311
• /
• 2004

It is reported that there is a limit in increasing heavy-weight impact noise isolation performance of the load bearing wall system apartments to meet the regulation of the Ministry of Construction and Transportation (MOCT). To increase the heavy-weight impact noise isolation performance, improvement in structural systems such as increasing concrete slab thickness and application of rahmen structure were proposed. In this study floor impact sound levels from toil apartments with two rahmen structure multi-story residential buildings were measured before the construction of the buildings finished. Measurements were made at living room and two bedrooms at each apartment when the finishing processes were finished. The average value of light-weight impact sound level from ten apartments was 56dB (L'$\sub$n,Aw/). The heavy-weight impact sound level was 44dB (L'$\sub$i.Fmax.Aw/) and the impact sound level of the impact ball was 41dB(L'$\sub$i.Fmax.Aw/), As a result floor impact noises at the rahmen structure system were lower than the regulation level.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2019년도 춘계 학술논문 발표대회
• /
• pp.8-9
• /
• 2019

Euro forms and aluminum forms, which are currently used in formwork construction sites are limited by their heavy weight and the use of environmentally hazardous form oils. Therefore, in this study, 'eco-friendly light weight form' was developed, which does not require form oils during the removal process of form. In addition, the superiority of the developed form was verified by comparison with Euro forms and aluminum forms in terms of noise generation and weight. Application of the eco-friendly light weight form in construction sites is expected to reduce the noise level, and increase workers' convenience. The productivity of formwork is also increased.

• 한국소음진동공학회논문집
• /
• 제24권4호
• /
• pp.339-347
• /
• 2014

Floor impact sound in high-rise apartment building became one of social problems. A lot of civil complaints on floor impact sound occur continuously and the number of disputes between neighbors in small and aged apartment buildings is increasing. Interests on heavy-weight impact sound pressure level measurement and evaluation method is increased. Previous study reported that heavy-weight impact sound level was changed by the sound field condition of receiving reverberation chamber. In this study, heavy-weight impact sound pressure level change by the receiving sound field condition was measured in standard test facility and mock-up test room. These two experimental conditions were designed to simulate averaged living room of common apartment units. By the change of sound absorption power in receiving room, heavy-weight impact sound pressure level in most of frequency bands were changed in standard test facility and mock-up room. Normalized maximum sound pressure level regulated in ISO 16032 showed wider range of heavy/soft impact sound pressure level. Heavy/soft impact sound pressure level change was became smaller by the application of standardized maximum sound pressure level and ISO/CD 10140-3 Amd 2 method. In the case of standardized maximum sound pressure level, absolute sound pressure level changed. From these results, receiving sound field correction method regulated in ISO/CD 10140-3 Amd 2 is needed for the precision measurement and evaluation of heavy-weight impact sound.