• Journal of Environmental Science International
• /
• v.18 no.4
• /
• pp.473-478
• /
• 2009

The removal characteristics of total petroleum hydrocarbons (TPHs) and heavy metals in contaminated soils with ultrasonic washing have been studied. The ultrasonic washing was evaluated on a laboratory scale. In this investigation, the effects of factors such as ultrasonic frequency, power intensity, duration of irradiation, contents of the TPHs and heavy metals and mixing ratios between the contaminated soils and water, were considered. Experimental results suggested that the rates for contaminant extraction of the TPHs and heavy metals in the contaminated soil increased considerably with the ultrasonic washing. Therefore, the ultrasonic washing has previously been to be an effective method to remediate the contaminated soils with the TPHs and heavy metals.

• Journal of Korean Society for Atmospheric Environment
• /
• v.19 no.2
• /
• pp.113-132
• /
• 2003

In May 2001, the Stockholm Convention on Persistent Organic Pollutants (POPs) for phasing out and eliminating POPs was signed by 90 countries at the Diplomatic Meeting in Stockholm. In 1998, three years before the Convention, the protocols on POPs and heavy metals were adopted by the United Nations Economic Commission for Europe under the Convention on Long-Range Transboundary Air Pollution. Growing attention on POPs and heavy metals during the past 10 years is primarily due to their toxicity in minute quantities. POPs and some metal compounds are even more toxic because of their bioaccumulation potentials associated with a high lipid solubility. Furthermore, owing to their persistence and semi - volatility, they are widely distributed in the environment, traveling great distances on wind and water currents. Recent international cooperation to address POPs and heavy metals has focused on these issues. Long -range transport of those pollutants are particularly concerned since Korea is located downwind of prevailing westerlies from China. In this paper, a review is provided to assess the properties, sources, emissions, and atmospheric concentrations on POPs and heavy metals.

• Journal of Life Science
• /
• v.20 no.9
• /
• pp.1378-1384
• /
• 2010

The present study aimed to investigate the effect of heavy metal contamination in the aquatic environment on the fishes (Opsariichthys bidens, Cyprinus carpio, Hemiculter eigenmanni and Culter brevicauda) inhabiting Andong and Imha reservoirs by comparing and analyzing the heavy metal contents accumulated in their tissues. Heavy metal contents were shown to be higher in the Andong reservoir than in the Imha reservoir. Accumulated heavy metals, Cr, Cu and Pb, were detected in tissues and bone tissues, but Cd was also found in the kidneys. Zn content was the highest among accumulated metals, whereas Cu content was the lowest in all tissues from the fishes in the Andong and Imha reservoirs. However, the amount of Cr in the tissues showed a twofold higher level in the Andong reservoir than that in Imha reservoir. The heavy metal contents of fish inhabiting the Andong reservoir were detected to be higher than those in the Imha reservoir. We also proposed that heavy metal contamination in water and its inhabiting fish is attributed to various heavy metals derived from water and sediments in the water environment of the Andong reservoir.

• Journal of environmental and Sanitary engineering
• /
• v.19 no.2
• /
• pp.15-22
• /
• 2004

Yellow loess, Tidal plat sediment, and mud are blown to be high in adsorption though they have great distinction according to the ratio of clay minerals content and their kinds. Thus one of the samples for this study can be obtained by drying of Yellow loess, Tidal plat sediment, and the mud which is semifinished products that are from the progress of heat treatment and making homogeneity which can be found everywhere in our county. Another sample can be prepared by reducing pollutants with the adsorbent and by homing heavy metals of their on. With the samples, noxious heavy metals such as Pb, Cd, and essential trace elements such as Cu, Fe, Mn by each concentration is tested for adsorption according to pH, the kinds of adsorbents and the amount of injection. With the help of these steps, this study shows that the adsorbents, which are green, reducing the additional pollution and low in price, can be found. It also shows that the optimal condition for removing pollutants can be found and the basic materials for treating water can be offered. The results were as follows ; Yellow loess shows the rates of adsorption by more than 50% and Tidal plat sediment and Mud show it by more than 90%. Thus Tidal plat sediment and Mud are higher than Yellow loess the rates of adsorption. The pH should be treated in natural condition because the rates of adsorption of Pb, Cd, Cu, Mn excepting Fe in mud is higher in pH 7 than in pH 3 of Yellow loess, Tidal plat sediment, and Mud. The drying adsorbents are good to use because the rates of adsorption of heavy metals has tendency to be higher in the drying method than in the burning method. It is considered that the more the mont of the injection of the adsorbent is , the higher the rates of adsorption is, and one gram is reasonable for the amount of the injection of Tidal plat sediment and mud. Yellow loess is suitable for the treatment of the water that includes low concentration of heavy metals because it has the lower rate of adsorption as the concentration of noxious heavy metals is higher. It is thought that Tidal plat sediment and Mud is proper for the treatment of the water that includes high concentration of heavy metals because the rates of adsorption has not been changed as the concentration of heavy metals increases.

• Korean Journal of Environmental Agriculture
• /
• v.6 no.2
• /
• pp.46-52
• /
• 1987

This study of adsorption and column percolation was conducted to examine the utilization of natural zeolite for the removal of heavy metals from waste water to compare with that of absorption activated carbon. The adsorption of heavy metals by natural zeolite was conformed to the Freundlich isotherm (1/n values: $0.12{\sim}0.45$, K values: $18.77{\sim}59.48$) and natural zeolite was turned out to be an effective adsorbent of heavy metals. At the same particle size and percolation velocity, zeolite adsorbed a greater amount of heavy metals was adsorbed on natural zeolite than activated carbon. The smaller the particle size, the more heavy metals that were adsorbed. It was postulated that the most effective size as an adsorbent of heavy metals from waste water ranged from 0.5 to 2.0mm. The slower the percolation velocity that of the heavy metal solution in column, the more heavy metals were adsorbed. Natural zeolite in a single solution adsorbed more heavy metals than that in mixed solution, and the order of the adsorption amount on natural zeolite was Cu>Zn>Cd.

• Korean Journal of Environmental Biology
• /
• v.27 no.4
• /
• pp.363-368
• /
• 2009

The Korean water deer (Hydropotes inermis argyropus) is an endemic species and one of the common species in Korea. The species ranges throughout the Korean peninsula and plays an important role as herbivores in natural ecosystem. Therefore, the species could be used as a good bio-indicator to monitor the quality of habitats. This study was to estimate the concentrations of five heavy metals (Fe, Cu, Zn, Cd and Pb) from three different organs (kidney, liver and spleen) in the Korean water deer. According to the analyses of heavy metal accumulations, the concentration of Fe is higher than Cu, Zn, Cd and Pb from all the organs. Among the organs, spleen (286.50) showed higher heavy metal concentrations than kidney (39.40) and liver ($23.21\;{\mu}g\;g^{-1}$). In general, the concentrations of the heavy metals were about two times higher in Cheorwon, Gangwon province than in the Eastern part of Jeonnam province. In particular, Cd and Pb showed a significant difference (P<0.05). Except for Fe in spleen, all of the heavy metal concentrations were below background levels.

• Journal of Environmental Science International
• /
• v.17 no.3
• /
• pp.287-296
• /
• 2008

A comprehensive quality survey for heavy metals, organophosphorous and organochlorine residual pesticides, and coplanar PCBs in samples such as water, sediments and soils as well as spiders has been implemented. The samples were undertaken at nine stream sites and their vicinity in August 2006, representing different surrounding environments. The levels of PCBs were expressed as concentrations and WHO-TEFs. Among 12 coplanar PCBs as target compounds in this study, 2,3', 4,4', 5-PentaCB (IUPAC # 118) was the congener with the highest concentration. The total concentrations and TEF values of coplanar PCBs in Siheung stream sediment (heavy industrial complex site located in Ansan city) were 3915.50 pg/g and 0.8366 pg-TEQ/g on a dry weight basis, respectively. Such levels were around 40 times higher compared to sediment from Gapyung stream (green site located in the upper of Myunggi mountain). It is probably due to the direct input of PCBs trom PCBs treatment materials. Organophosphorous (EPN, dementon-s-methyl, diazinon, parathion, and phenthoate) and organochlorine (alpha-BHC, aldrin, 4,4'-DDT, 4,4'-DDE, endosulfan alpha and etc.) pesticides were not detected above 5 ppb of detection limits. The concentrations of Cu and Cd in water and sediment samples from Siheung stream were 44.11 and $0.17ug/m\ell$ and $713.42{\mu}g/g$ and $3.73{\mu}g/g$, respectively, which contained $20\sim40$ times higher concentrations than those from Gapyung stream. In addition to the water and sediment samples, the levels of heavy metals in spider from designated sampling sites were also determined. Heavy metals in spider collected near Siheung stream was appeared to be equivalent and/or a little higher levels with respect to other spiders. Furthermore, the ratio of relative heavy metals (Cu, Cd, and Pb) in spider from each stream site showed a correlation as similar as that of heavy metals in soil samples.

• Journal of Biosystems Engineering
• /
• v.38 no.4
• /
• pp.306-311
• /
• 2013

Purpose: With the ever-rising energy prices, thermal energy heavily consuming facilities of the agricultural sector such as commercialized greenhouses and large-scale Rice Processing Complexes (RPCs) need to cut down their energy cost if they must run profitable businesses continually. One possible way to reduce their energy cost is to utilize combustible agricultural by-products or low-price oil instead of light oil as the fuel for their boiler systems. This study aims to analyze the heavy oil combustion characteristics of a newly developed hot water boiler system that can use both rice husk and heavy oil as its fuel convertibly. Methods: Heavy oil combustion experiments were conducted in this study employing four fuel feed rates (7.6, 8.5, 9.5, 11.4 $l/h$) at a combustion furnace vacuum pressure of 500 Pa and with four combustion furnace vacuum pressures (375, 500, 625, 750 Pa) at fuel feed rates of 9.5 and 11.4 $l/h$. Temperatures at five locations inside the combustion furnace and 20 additional locations throughout the whole hot water boiler system were measured to ascertain the combustion characteristics of the heavy oil. From the temperature measurement data, the thermal efficiency of the system was calculated. Flue gas smoke density and concentrations of air-polluting components in the flue gas were also measured by a gas analyzer. Results: As the fuel feed rate or combustion furnace vacuum pressure increased, the average temperature in the combustion furnace decreased but the thermal efficiency of the system showed no distinctive change. On the other hand, the thermal efficiency of the system was inversely proportionally to the vacuum level in the furnace. For all experimental conditions, the thermal efficiency remained in the range of 80.1-89.6%. The CO concentration in the flue gas was negligibly low. The NO and $SO_2$ concentration as well as the smoke density met the legal requirements. Conclusions: Considering the combustion temperature characteristics, thermal efficiency, and flue gas composition, the optimal combustion condition of the system seemed to be either the fuel feed rate of 9.5 $l/h$ with a combustion furnace vacuum pressure of 375 Pa or a fuel feed rate of 11.4 $l/h$ with a furnace vacuum pressure between 500 Pa and 625 Pa.

• Journal of Wetlands Research
• /
• v.17 no.2
• /
• pp.146-154
• /
• 2015

Domestic railway industry has grown in numbers, scale of railway ndustrial and operation because was focused on an environmentally sustainable transportation. However, it is not enough to treat and prevent heavy metals which occur as the railway operation increases. The heavy metals occurred when the operating railway and it will be flow into water system with rainfall effluent during rainfall. will flow out along with the rainfall effluent when rainfall comes. In case of a railway bridge, In particular, heavy metals were flow into the water system without any treatment from railway bridges where located nearby rivers and lakes. So, rainfall effluent from railway facilities was occurred pollution of water system. For the prevent of heavy metal runoff during rainfall, the adsorptivity of material in railway roadbed is important.In this study, adsorptivity of gravel which is main gravel and blast-furnace slag were conducted adsorption test and deducted Freundlich's and Langmuir's isothermal adsorption equations. Safety as railway subbase course material was evaluated using modeling. As a result, absorption amount of slag, Cd and Cu, was shown higher than gravel and Pb along with Zn showed higher absorption amount of gravel. However, absorption amount of slag was shown higher than gravel used as railway subbase course material as time passes by. Absorption features had more suitable determination coefficient of heavy metals in warm absorption type such as Langnmuir compared to warm absorption type like Freundlich. To add, they showed less transformation by about 10% compared to gravel in safety evaluation through modeling. This is a railway subbase course material that prevents water outflow of heavy metal thus we can know slag is needed to be used.

• Applied Biological Chemistry
• /
• v.37 no.6
• /
• pp.480-486
• /
• 1994

The present series of investigations have been undertaken to know the effective removal method of some pesticides, heavy metals and detergent when the doses of oxidants and coagulant were changed in the treatment process of drinking water containing organic material. Three pesticides, IBP, diazinon and CNP, were removed by about 68 to 100% by treatment of oxidant, $Cl_2$. Especially, diazinon was completely removed by treatment of $Cl_2$ and other oxidants such as $Cl_2,\;KMnO_4\;and\;O_3$. However, butachlor removal measured only 20.3 to 26.7% due to treatment of all oxidant used. A detergent, sodium dodecylbenzenesulfonate, was effectively removed by treatment of $O_3$ but remained stable in the presence of other oxidants. The heavy metals of Cd, Pb, Cu and Zn in water were not affected by treatment of all oxidants used. By changing the concentration of humic matter and the dosage of coagulant, the removal of heavy metals was increased according to the increase of coagulant dosage, and decreased when increasing the concentration of humic matter, whereas the pesticides and detergent were not effectively removed.