• Title/Summary/Keyword: Heavy cu

Search Result 1,650, Processing Time 0.032 seconds

Assessment on the Content of Heavy Metal in Orchard Soils in Middle Part of Korea (중부지역 과수원 토양중의 중금속 함량 평가)

  • Jung, Goo-Bok;Kim, Won-Il;Lee, Jong-Sik;Shin, Joung-Du;Kim, Jin-Ho;Yun, Sun-Gang
    • Korean Journal of Environmental Agriculture
    • /
    • v.23 no.1
    • /
    • pp.15-21
    • /
    • 2004
  • Objectives of this study were to monitor the distribution of heavy metals, to compare extractable heavy metal with total content and to investigate the relationships between soil physico-chemical properties and heavy metals in orchard soil. Sampling sites were 48 in Gyeonggi, 36 in Gangwon, 36 in Chungbuk, and 44 in Chungnam, Soils were collected farm form two depths, 0 to 20 and 20 to 40 cm (here after referred to as upper and lower layers) from March to May in 1998. Total contents of heavy metal in soils were analyzed by ICP-OES after acid digestion ($HNO_3$:HCl:$H_2O_2$) whereas extractable contents were measured after successive extraction of 0.1N-HCl, 0.05 M-EDTA, and 0.005 M-DTPA. Mercury was analysed by mercury atomizer. The average contents of Cd Cu, and Pb in the extractant with 0.1N-HCl at upper layer were 0.080, 4.23, and 3.42 mg/kg, respectively. As content in the extractant with 1N-HCl was 0.44 mg/kg, and total contents of Zn, Ni and Hg were 78.9, 16.1, and 0.052 mg/kg, respectively. The ratios of concentrations of heavy metals to threshold values (Cd 1.5, Cu 50, Pb 100, Zn 300, Ni 40, Hg 4 mg/ke in Soil Environmental Conservation Act in Korea (2001) were low in the range of $1/2.5{\sim}1/76.9$ in orchard soils. The ratios of extractable heavy metal to total content ranged $5.4{\sim}9.21%$ for Cd, $27.9{\sim}47.8%$ for Cu, $12.6{\sim}21.8$% for Pb, $15.8{\sim}20.3%$ for Zn, $5.3{\sim}6.3%$ for Ni, and $0.7{\sim}3.6%$ for Zn, respectively. Cu and Pb contents in 0.05 M-EDTA extractable solution were higher than those in the other extractable solution. Total contents of Cd, Ni and Ni in soils were negatively correlated with sand content but positively correlated with silt and clay contents. Ratios of extractable heavy metal to total content were negatively correlated with clay content but ai and Ni contents were positively correlated with soil pH, organic matter, and available phosphorous. Therefore, the orchard soil was safe because the heavy metal contents of orchard soil were very low as compared to its threshold value in the Soil Environmental Conservation Act. However, it need to consider the input of agricultural materials to the agricultural land for farming practices for assessment of heavy metals.

Toxic Effects of Heavy Metal (Cd, Cu, Zn) on Population Growth Rate of the Marine Diatom (Skeletonema costatum) (중금속(Cd, Cu, Zn)이 해산규조류(Skeletonema costatum)의 개체군 성장률에 미치는 독성영향)

  • Hwang, Un-Ki;Ryu, Hyang-Mi;Lee, Ju-Wook;Lee, Seung-Min;Kang, Han Seung
    • Korean Journal of Environmental Biology
    • /
    • v.32 no.3
    • /
    • pp.243-249
    • /
    • 2014
  • In this study, we evaluated the toxic effects of heavy metals (Cd, Cu, Zn) on the population growth rate (r) of the marine diatom, Skeletonema costatum. S. costatum. The population growth rate (r) of the species was determined after 96 hrs. of exposure to Cd (0, 0.63, 1.25, 2.50, 5.00, 10.00 ppm), Cu (0, 0.25, 0.50, 0.75, 1.00, 1.25, 1.50 ppm) and Zn (0, 0.31, 0.63, 1.25, 2.00, 2.50, 5.00 ppm). It was observed that 'r' in the control (absence of Cd, Cu and Zn) were greater than 0.05, however suddenly decreased with increased heavy metal concentrations. Cd, Cu and Zn reduced 'r' in a dose-dependent manner and a significant reduction were occurred at concentration of greater than 1.25, 1.25 and 2.50 ppm, respectively. Based on the toxicity, the heavy metal were ranked as Cu>Zn>Cd, with EC50 values of 1.11, 2.13 and 6.84 ppm, respectively. The lowest-observed-effective-concentration (LOEC) of 'r' in exposed to Cd, Cu and Zn were 1.25, 1.00, 2.00 ppm, respectively. Precisely, a concentration of greater than 1.25 ppm of Cd, 1.00 ppm of Cu and 2.00 ppm of Zn in marine ecosystems induced toxic effect on the 'r' of S. costatum. Based on our results, we suggested that the 'r' of S. costatum might be a useful bio indicator for the toxicity assessment of heavy metals in marine ecosystems.

Biosorption of Heavy Metals by Biomass of Seaweeds, Laminaria species, Ecklonia stolonifera, Gelidium amansii and Undaria pinnatifida (해조류(Laminaria species, Ecklonia stolonifera, Gelidium amansii, Undaria pinnatifida)에 의한 중금속 생물흡착 특성)

  • Choi, Ik-Won;Kim, Sung-Un;Seo, Dong-Cheol;Kang, Byung-Hwa;Sohn, Bo-Kyoon;Rim, Yo-Sup;Heo, Jong-Soo;Cho, Ju-Sik
    • Korean Journal of Environmental Agriculture
    • /
    • v.24 no.4
    • /
    • pp.370-378
    • /
    • 2005
  • The characteristics of heavy metal biosorption on the seaweeds were investigated to develop a biological treatment technology for wastewater polluted with heavy metals. The heavy metal biosorption on seaweeds ranked in the tallowing order: U. pinnatifida$\geq$E. stolonifera$\geq$Laminaria sp.>G. amansii. The Pb was biosorbed in the range of $93{\sim}99%$, and the Cu and Cd were biosorbed in the range of $70{\sim}80%$ at the concentration of the heavy metal of $100mg/{\ell}$ respectively. The seaweed which was pretreated with $CaCl_2$ solution improved the biosorption of the heavy metals. The temperature and pH didn't affect the biosorption of heavy metals. The Langmuir isotherm reasonably fit the data of heavy metal biosorption compared to the Freundlich isotherm. The affinity of metals on the biosorption ranked in the following order: Pb>Zn>Cu>Cd. The biosorption efficiency of the heavy metals on the U. pinnatifida decreased in the multi-component rather than the single component. The heavy metals adsorbed on the U. pinnatifida were recovered using 0.3%-NTA. U. pinnatifida among the seaweed used in this work showed the best performance for the biosorption of the heavy metals.

A Study on the Leaching of Heavy Metals by Municipal Solid Waste Landfill Leachate (폐기물 매립지 침출수에 의한 중금속 용출에 관한 연구)

  • Jung, Jong-Gwan;Jang, Won;Park, Young-Suk
    • Journal of Environmental Impact Assessment
    • /
    • v.6 no.1
    • /
    • pp.105-110
    • /
    • 1997
  • Sanitary landfill is a general method as a final disposal of municipal solid waste(MSW), therefore leachate characteristics are very various as lime goes by because of highly concentrated organic acids are contained non biodegradable COD. So it is hard to abide by the mandatory standards of discharge eventhough applying the physicochemical and biological processes to treat the leachate. The process of treating leachate are determined by the degree of removal and components, but they are highly contained organic materials. It is a removal method to use jointly with the physicochemical process if the hard and fast rule is needed. The critical components of material are COD, ammonia, salts and heavy metals in the case of treating biologically. Biological process is to use metabolism of microorganism, therefore it is a desirable condition which heavy metals are not contained, because they acting as an inhibitor of enzyme. Of these are contained, organic decomposition and synthetic function of microorganisms decrease significantly. Consequently, this research paper lays emphasis on the concentration of heavy metals in leachate and for the purpose of forecasting the factors which are affecting the leaching of metalic waste in some degree, experimented the various reacting conditions. 1. When the concentration of heavy metals in leachate is in comparison with the level eluted after reaction, at pH 7.9 the result of reaction for PCB to CCL scrap showed that Zn, Mn, Cu was more eluted 11.6 times, 340.3 times, and 2,705.5 times respectively than the leachate undiluted solution. 2. At the condition of strong acid pH 4.7, the concentration of heavy metals in EM undiluted solution showed that Zn, Mn, Cu was more eluted 26.5 times, 147.3 times, and 3,656.3 times respectively than leachate undiluted solution. 3. When the ratio leachate to EM was 50 vs 50(V/V%), Mn was more eluted 198.7 times than leachate undiluted solution, but Zn and Cu do not show the meaningful results. 4. The color of landfill leachate was black-brown. And fulvic acid that is main ingredient of NBD COD contained, oxygen of 44~50%. For that reason, I estimated that the level of Zn, Mn, Cu was higher than the case of leachate. 5. COD of leachate from general landfill is difficult to remove. Because the solution of heavy metals is improved by the character of leachate(pH & ingredient of oxygen etc.) hence the Mn, Cu, Zn act as disturbing factor, the biochemical treatment is hard. Therefore the type of PCB & CCL scrap, iron, aluminum contained metals need to previously separate from general wastes as much as possible.

  • PDF

Heavy Metal Concentrations in the Mollusc Gastropod, Cipangopaludina chinensis malleata from Upo Wetland Reflect the Level of Heavy Metals in the Sediments

  • Kim, Heung-Tae;Kim, Jae-Geun
    • Journal of Ecology and Environment
    • /
    • v.29 no.5
    • /
    • pp.453-460
    • /
    • 2006
  • Upo wetland is the largest inland wetland in Korea as Ramsar Convention Area. The purposes of the study were to investigate the levels of heavy metals (Cd, Cr, Cu, Ni, Pb and Zn) in the sediment and Cipangopaludina chinensis malleata from three sites of the wetland and to assess the potential of the gastropod as a bioindicator for heavy metal levels. The gastropods were dissected into shell and soft tissue without the digestive and excretive organs. The levels of Cd, Cu and Pb were below the guideline of Soil Environment Conservation Act and the heavy metals except Cr were slightly different among the sites. Cd was higher in Upo site ($0.32{\mu}g/g$) than Sajipo site ($0.28{\mu}g/g$). Cu and Zn showed the highest value in Sajipo as $43.5{\mu}g/g\;and\;39.8{\mu}g/g$, respectively while the concentrations of Pb and Zn were the highest in Upstream as $58.8{\mu}g/g\;and\;138{\mu}g/g$, respectively. In the soft tissues and shells of the gastropod, the overall common trend in the concentrations of the heavy metals was revealed with the following order: Zn > Cu > Cr > Ni > Pb > Cd and Ni > Zn > Cr > Cu > Pb > Cd, respectively. Although the soft tissues exhibited higher concentrations of the heavy metals except Ni than the shell in the gastropod, the levels of Cd and Pb in the gastropod were generally below the restrictive values set up by Korea Food & Drug Administration. From Duncan's Multiple Range Test (DMRT) results, the concentrations of Pb and Zn in the sediments among the sites were reflected on the soft tissue (Pb) and the shell (Pb and Zn) of the gastropod in the same order. The lower value of coefficient of variation (CV) in Pb concentration of the shell than in that of the soft tissue supports the usefulness of the shell as a bioindicator for Pb pollution. Although the CV value in the shell was a little higher than in the soft tissue, DMRT results and the stability of incorporated Zn into the shell support the use of the shell of the gastropod as a potential bioindicator for long-term contamination of Zn.

Sequential Fractionation of Heavy metals from Mine Tailings and Two Series of Agricultural Soils (광미장과 두개의 농업토양통 토양으로 부터의 중금속의 연속 분획)

  • Chung, Doug-Young;Lee, Do-Kyoung
    • Korean Journal of Soil Science and Fertilizer
    • /
    • v.32 no.4
    • /
    • pp.375-382
    • /
    • 1999
  • In order to investigate the contamination characteristics of the heavy metals in the mine tailings of abandoned gold mine and its surrounding agricultural soils, a sequential extraction procedure of increasing reactivity in the dissolution processes of the heavy metals(Cd, Cu, and Pb) which were associated with solid and/or solution phase in soils was attempted to partition into six particulate fractions : exchangeable, bound to carbonate, bound to Fe-Mn oxides, bound to organic matter, residual, and soluble. Among indigenous heavy metals in the mine tailings, Pb was the most abundant and Cu and Cd were followed by. Fractionation result of Pb obtained from the triplicate samples of the mine tailings were in the order of Fe-Mn oxide> Carbonate> Residual> Organic> Exchangeable> Soluble, while Wolgok series were Exchangeable > Fe-Mn oxide > Carbonate> Organic> Residual> Soluable. However the other heavy metals studied were not followed this trend. The fractionation results of mine tailing and agricultural soils demonstrated that different geochemical fractions were operationally defined by an extraction sequence that generally followed the order of decreasing solubility. Therefore potential mobility and bioavailability of heavy metals as toxic pollution sources can be evaluated when studying the pollution levels of heavy metals in soils.

  • PDF

The Adsorption Properties of Heavy Metal Ions on to Cotton Fabrics Treated with Reactive Anionic Agent (반응형 음이온화제 처리 면직물에 대한 중금속 이온의 흡착특성)

  • Kim Mi-Kyung;Yoon Seok-Han;Kim Tae-Kyeong;Lim Yong-Jin
    • Textile Coloration and Finishing
    • /
    • v.17 no.1
    • /
    • pp.20-29
    • /
    • 2005
  • Cotton fabric was treated with a reactive anionic agent in order to have anionic sites(-S03-) on it, which made it possible for the fabric to adsorb various cationic materials. In this study, the adsorptivity of various heavy metal ions such as Pb(II), Cd(II), Cr(III), Co(II), Cu(II), Ni (II) and Cr(VI) on the cotton fabrics treated with anionic agent was examined at the various conditions; concentrations of heavy metal ions, pHs of solution, reaction time and temperature. As a result, the adsorptivity of the heavy metal ions on the cotton fabrics treated with the anionic agent was highly increased comparing to that of untreated cotton fabrics. The order of the adsorptivity was as follows: $Pb(II)>Cd(II)>Cu(II)\geqNi(II)\geqCo(II)>Cr(III)\ggCr(VI)$. The adsorption amounts of most heavy metal ions were increased in weak alkaline conditions and were reached to an adsorption equilibrium within 10 ~ 30 minutes. The maximum adsorption ratios of Pb(II) and Cd(II) were respectively 99% and 80% of the initial concentration of heavy metal ions. Therefore the anionized cotton fabrics seem to be utilized as an adsorption fabrics for the removal of heavy metal ions in the waste water.

Removal of Heavy Metals by Cladophora sp. in Batch Culture: The Effect of Wet-mixed Solidified Soil (loess) on Bioremoval Capacities

  • Kim, Jin-Hee;Lee, Kyung-Lak;Kim, Sook-Chan;Kim, Han-Soon
    • Korean Journal of Ecology and Environment
    • /
    • v.40 no.4
    • /
    • pp.537-545
    • /
    • 2007
  • The heavy metal removal capacity of filamentous green alga Cladophora sp. cultured together with wet-mixed solidified soil (loess) was tested. A Cladophora sp. was cultured for 5d, with added Chu No. 10 medium, in stream water contaminated by high concentration of heavy metals from a closed mine effluent. Heavy metal ion concentrations of the medium and in algal tissue were measured every day during the experiment. Dissolved metals (Al, Cd, Cu, Fe, Mn, Zn) in medium were rapidly removed (over 90% elimination) within 1-2d when alga and loess were added. Dissolved heavy metals dropped by only 10% when algae were cultured without loess. The Cladophora sp. accumulated much more heavy metals when cultured with loess than when the alga was cultured alone. Cladophora sp. exhibited a maximum uptake capacity for Al ($17,000{\mu}g^{-1}$ algal dry weight). The metal bioremoval capacities of the algae were in the order Al, Fe, Cu, Mn, Zn and Cd. The heavy metal removal capacity of Cladophora sp. showed significant increases when wet-mixed solidified soil was added to culture media.

Heavy Metal Removal from Drinking Water using Bipolar Surface Modified Natural Mineral Adsorbents (천연광물의 양극성 표면개질을 이용한 상수원수 중 중금속제거 특성)

  • Kim, Nam-youl;Kim, Younghee
    • Journal of Environmental Health Sciences
    • /
    • v.45 no.6
    • /
    • pp.561-568
    • /
    • 2019
  • Objectives: The most commonly detected heavy metals in rocks and soils, including Pb, Cd, Cu, Fe, Mn and As, are representative pollutants discharged from abandoned mines and have been listed as potential sources of contamination in drinking water. This study focused on increasing the removal efficiency of heavy metals from drinking water resources by surface modification of natural adsorbents to reduce potential health risks. Methods: Iron oxide coating and graft polymerization with zeolites and talc was conducted for bipolar surface modification to increase the combining capacity of heavy metals for their removal from water. The removal efficiency of heavy metals was measured before and after the surface modification. Results: The removal efficiency of Pb, Cu, and Cd by surface modified zeolite showed 100, 92, and 61.5%, respectively, increases compared to 64, 64, and 38% for non-modified zeolite. This implies that bipolar surface modified natural adsorbents have a good potential use in heavy metal removal. The more interesting finding is the removal increase for As, which has both cation and anion characteristics showing 27% removal efficiency where as non-modified zeolite showed only 2% removal. Conclusions: Zeolite is one of the most widely used adsorptive materials in water treatment processes and bipolar surface modification of zeolite increases its applicability in the removal of heavy metals, especially As.

Contents of Heavy Metals in Leaf and Bark of Ginkgy biloba snd Platatus occidentalis and Soil of Roadside in Masan City (마산시 도로 주변 은행나무와 양버즘나무의 잎과 수피 및 토양의 중금속 함량)

  • Cheon, Seon-Hee;Jong-Hee Kim
    • The Korean Journal of Ecology
    • /
    • v.19 no.3
    • /
    • pp.241-249
    • /
    • 1996
  • To determine the accumulation and distribution of heavy metals in plants and soils of roadsides, the leaf and bark of Ginkgo biloba and Platanus occidentalis, and the soil were sample from Masan-city roadside and Chinhae forest land in July and November, 1994. The content of heavy metals from all the samples in Masan-city area was much higher than that in Chinhae forest land. The amount of heavy metals in soil was higher than those in plant parts of boty trees. The total amount of heavy metals of the bark was higher than the leaf of G. biloba plants. But that of the bark was less than the leaf of P. occidentalis. Heavy metal content in plants (leaf, bark) varied among elements and collections. The concentrations of heavey metals in both trees were in the order of Zn > Cu > Pb > Cd. The concentrations of the four heavy metals in leaf and Zn in soil in G. Biloba were seasonally changed. Whereas those in P. occidentalis were not significantly changed. And there was a high correlation between the concentrations of Pb and Cu in both trees.

  • PDF