• Parasites, Hosts and Diseases
• /
• 제57권1호
• /
• pp.49-53
• /
• 2019

Contaminated liver fluke egg in the environment has led to the high prevalence of human opisthorchiasis associated with cholangiocarcinoma in Southeast Asia. To find the effective lessening methods of Opisthorchis viverrini eggs in the contaminated environment, we investigated the temperature conditions for killing of these trematode eggs in vitro. Numerous O. viverrini eggs were obtained in the proximal part of uteri of adult worms from experimental hamsters. Mature eggs with miracidium were allocated by experimental groups (2 control: positive and negative and 4 treatment: 50, 60, 70, and $80^{\circ}C$) with 0.85% saline, and treated by the experimental plan. Eggs in each experimental groups were observed under the confocal microscope after stain with Propidium Iodide (PI) to evaluate the effect of temperatures. Eggs in 70 and $80^{\circ}C$ groups were all killed after over 10 min heated. Majority of eggs in $60^{\circ}C$ (10, 15, and 30 min heated), 70 and $80^{\circ}C$ (5 min heated) groups were inactivated. However in $50^{\circ}C$ group, below half of eggs were to be killed in all time lapse (10, 15 and 30 min). In order to prevent O. viverrini infection and cholangiocarcinoma, direct treatment of sewage by heating at 70 or $80^{\circ}C$ at least 10 min is essential. Therefore, treatment of O. viverrini eggs at a high temperature is a potential method for controlling egg contamination in sewage.

• 한국포장학회지
• /
• 제26권1호
• /
• pp.1-9
• /
• 2020

We evaluated the applicability of baking soda, charco'al, coffee, and green tea as a natural deodorant in Kimchi packaging. Moreover, to evaluate the potential usage of these deodorants in packaging materials and confirm their applicability in high-temperature melt-extrusion processing, the thermal stabilities of the deodorants were investigated, and heat-treated deodorants were evaluated in terms of the deodorizing function compared with non-treated deodorants. Aroma patterns were decreased after deodorizing treatment with all-natural deodorants. Dimethyl disulfide, methyl trisulfide, and diallyl disulfide, the most significant odorous Volatile organic compounds (VOCs) of Kimchi, decreased after treatment with the deodorants. In particular, baking soda and charcoal showed the highest efficiency in removing odorous compounds and VOCs from Kimchi, even after high-temperature processing. The acetic acid removal rates for both baking soda and charcoal were 99.9±0.0%. The heating process increases the deodorizing effects of baking soda. Sensory evaluation results showed that there is a significant increase (p < 0.05) in the overall preference for Kimchi samples packaged with charcoal and baking soda. This study provides useful information for the deodorization effects of natural deodorants for Kimchi smell and their applicability for packaging materials.

• 공업화학
• /
• 제8권4호
• /
• pp.631-636
• /
• 1997

흡착제로 널리 쓰이는 다공성탄소의 흡착성능을 증가시키는 연구를 수행하였다. 열처리에 의하여 다공성탄소의 흡착성능을 증가시킨 후, 유해중금속의 일종인 $Cr^{+6}$의 선택적 흡착을 시행하였다. 다공성탄소의 적정 열처리 온도는 $340{\sim}350^{\circ}C$가 가장 적절하였으며, 이때의 평균 비표면적은 Brunauer-Emmett-Teller(BET) 방법에 의해 $1380m^2/g$로 측정되었다. 열처리 과정에서 전체중량의 약 10%의 감소가 있었으나, 비표면적의 증가로 고품질의 흡착제가 되었다. 또한 열처리된 다공성탄소에 의하여 액상에서의 $Cr^{+6}$의 제거가 성공적으로 수행되었다.

• 생명과학회지
• /
• 제11권3호
• /
• pp.203-210
• /
• 2001

To produce the instant marsh calm(Corbicula elatior) soup with abundant taste and flavor. optimum conditions of heating temperature and time for extraction were investigated. Excretion rate in a pre-treatment for excretion of estuary was 82% at 15% salt concentration for 6 hr and 95% at pH 7.5 for 10 hr. The contents of glycogen and amino-nitrogen were the most high levels in the treatments extracted at 9$0^{\circ}C$ for 3 hr, at 10$0^{\circ}C$ for 1.5 hr and at 11$0^{\circ}C$for 1 hr. The contents of total free amino acids in the extracts treated at 9$0^{\circ}C$, 10$0^{\circ}C$ and 11$0^{\circ}C$ were 367.05mg/100g, 472.23 mg/100g and 463.54 mg/100g, respectively and optimal temperature was above 10$0^{\circ}C$. The mineral contents was the most high level for the extract treated at 10$0^{\circ}C$ for 1.5hr. The results of sensory evaluation showed that tastes for the marsh calm extracts had no significant discrimination, while external appearances and flavors for the extract done at 10$0^{\circ}C$ for 1.5 hr were excellent. The extracts at 10$0^{\circ}C$ showed a little dark color and those at 9$0^{\circ}C$ smell a little fish flavor.

• 한국세라믹학회지
• /
• 제52권3호
• /
• pp.192-196
• /
• 2015

Low soda alumina powder was fabricated using silica (${\alpha}$-quartz) as an agent for removing soda components in the alumina. Quartz powder 2 mm in size was added to aluminum hydroxide obtained through the Bayer process, and then the mixture was heated at various temperatures. Finally, the heat-treated powders were sieved for classification. In this study, the effects of the quartz amount and heating temperature on the mechanism of removing soda were examined. A minimum soda content of 0.005 wt% was observed at the conditions of 15 wt% quartz (based on $Al(OH)_3$ amount) heat-treated at $1600^{\circ}C$ for 8 h. The soda components, such as $Na_2O$, NaOH, and $Na_2CO_3$, in alumina were ionized and activated at high temperature, and this facilitated the reaction with quartz silica and alumina producing nepheline. The advantages of using quartz include low iron content and low cost in comparison with the conventional de-soda process using chamotte, another silicate mineral.

• 한국연초학회지
• /
• 제6권1호
• /
• pp.39-49
• /
• 1984

In the tobacco industry, it is important to study the change of mechanical property occurring the expansion process. The purpose of this study is to attain basic data for development of a tobacco expansion method. 1 . Freon gas was adsorbed to tobacco under various conditions of temperature, relative humidity and pressure, and then the amount of freon gas adsorbed was analyzed by GC. Freon adsorption rate of Burley 21 was more than that of By104 at the same condition and about 17 $\pm$ 1% moisture content produced better adsorption rate. 2. Freon adsorbed sample were heated to about $150^{circ}C\;to\;230^{\circ}C$ in a drying oven and recycle duct form about 2 to 30 seconds, and then the change of mechanical property were measured. Heated leaf was damaged when the tissue was pressed by the force of above $0.5x10^8dyn/cm^2$. The optimum condition of no damage of the sample was below the temperature of 15$0^{\circ}C$ and heating time of 10 seconds. It was more economically advantages to treated sample in a recycle duct than to be in a drying oven. By this process, the specific volume of the heated sample was increased from 80 to 110 percent in comparison to that of untreated sample.

• 한국정밀공학회지
• /
• 제30권3호
• /
• pp.271-277
• /
• 2013

Inconel 718 super alloy was aging heat treated at the temperature range from $675^{\circ}C$ to $785^{\circ}C$ for 5~40 hours after solution annealing at $1025^{\circ}C$ for 1 hour. The aging treated specimens were investigated microstructure, mechanical properties and thermal expansion/contraction. Precipitates appeared for a long time aging treatment were niobium carbide and also ${\gamma}^{\prime}$ phase. For the aging treatment time of 10 hours, the changes in strength and hardness with increasing aging treatment temperature showed the maximum value at the temperature of $725^{\circ}C$. This maximum value is to be related with the precipitation of ${\gamma}^{\prime}$ and ${\gamma}^{{\prime}{\prime}}$ phases. The decrease in strength, elongation and hardness during long time aging at $725^{\circ}C$ were thought to be induced from the coarsening of the grain size and the transformation of ${\gamma}^{{\prime}{\prime}}$ phase to ${\gamma}^{\prime}$ phase. For the specimens treated for 10 hours, impact energy showed constant value of ~105 J with increasing the aging temperature, however this value continuously decreased with elapsing time at the aging temperature of $725^{\circ}C$. It was found that the decrease in impact value was induced from the coarsening of grain size and the carbide coarsening. The coefficient of thermal expansion of aging treated Inconel 718 alloy increased with raising test temperature, and the coefficient was appeared $11.57{\sim}12.09{\mu}m/m{\cdot}^{\circ}C$ and $14.28{\sim}14.39{\mu}m/m{\cdot}^{\circ}C$, respectively, after heating to $150^{\circ}C$ and $450^{\circ}C$.

• 자원리싸이클링
• /
• 제20권3호
• /
• pp.62-67
• /
• 2011

마이크로파와 고온발열체의 연속식 융합공정을 이용하여 수분변화와 전력변화 그리고 온도에 따라 유류오염토양의 분해 및 제거 특성을 연구하였다. 긴 탄소고리(C18-C50)를 가진 윤활유 계열의 오염물질은 온도변화에 따라 TPH 처리량이 6 kW, 700일 때 85.2%로 처리시간 40분에 1788 mg/kg로 제거되었다. 경유, 휘발유 오염토양의 경우 6 kW, 500일 때 처리사간 20분에 567 mg/kg로, 98.4%의 처리율을 보였다. 난분해성 유류오염물질의 경우 마이크로파 6 kW, 700, 30분안 처리를 한 경우 토양오염우려기준 3지역의 2000 mg/kg에 도달하는 것으로 나타났고, 이때 처리비용은 8,173원/ton으로 나타났다.

• 한국재료학회지
• /
• 제30권9호
• /
• pp.489-494
• /
• 2020

SiC is a material with excellent strength, heat resistance, and corrosion resistance. It is generally used as a material for SiC invertors, semiconductor susceptors, edge rings, MOCVD susceptors, and mechanical bearings. Recently, SiC single crystals for LED are expected to be a new market application. In addition, SiC is also used as a heating element applied directly to electrical energy. Research in this study has focused on the manufacture of heating elements that can raise the temperature in a short time by irradiating SiC-I₂ with microwaves with polarization difference, instead of applying electric energy directly to increase the convenience and efficiency. In this experiment, Polydimethylsilane (PDMS) with 1,2 wt% of iodine is synthesized under high temperature and pressure using an autoclave. The synthesized Polycarbosilane (PCS) is heat treated in an argon gas atmosphere after curing process. The experimental results obtain resonance peaks using FT-IR and UV-Visible, and the crystal structure is measured by XRD. Also, the heat-generating characteristics are determined in the frequency band of 2.45 GHz after heat treatment in an air atmosphere furnace.

• Bulletin of the Korean Chemical Society
• /
• 제25권6호
• /
• pp.859-864
• /
• 2004

The solid solutions of the $Sr_{1-x}Ba_xFeO_{3-y)$ system (x = 0.0, 0.1, 0.2 and 0.3) having a perovskite structure were prepared in air at 1423 K and then heat-treated in air (A), $O_2(O)\;and\;N_2(N)$ to examine possibility of controlling the nonstoichiometry and applicability as an additive for electrical conducting inorganic adhesives (ECIA). In the samples heated in $N_2$ stream, there existed almost no $Fe^{4+}$ ions, and at constant temperature their electrical conductivities were considerably lower than those of the samples heat-treated in air or $O_2.\; Sr_{0.8}Ba_{0.2}Fe^{3+}_{0.49}Fe^{4+}_{0.51}O_{2.76}$ (SB2-A) whose $Fe^{3+}/Fe^{4+}$ ratio was nearly 1 (0.96) and whose conductivity values (1.04 $ohm^{-1}cm^{-1}$ at 283 K and 1.88 $ohm^{-1}cm^{-1}$ at 673 K) were higher than any other samples, was found to be the best additive for ECIA.