• Asian Pacific Journal of Cancer Prevention
• /
• 제15권7호
• /
• pp.3253-3260
• /
• 2014

Background: A case-control study was conducted to evaluate the effect of household exposure, dietary habits, smoking and Glutathione S-Transferases M1, T1 polymorphisms on lung cancer among women in Mizoram, India. Materials and Methods: We selected 230 newly diagnosed primary lung cases and 460 controls from women in Mizoram. Multivariate logistic regression analysis was performed to estimate adjusted odds ratio (OR). Results: Exposure of cooking oil fumes (p<0.003), wood as heating source for cooking (p=0.004), kitchen inside living room (p=0.001), improper ventilated house (p=0.003), roasting of soda in kitchen (p=0.001), current smokers of tobacco (p=0.043), intake of smoked fish (p=0.006), smoked meat (p=0.001), Soda (p<0.001) and GSTM1 null genotype (p=0.003) were significantly associated with increased risk of lung cancer among women in Mizoram. Significantly protective effect was observed for intake of bamboo shoots (p=<0.001) and egg (p<0.001). A clear increase in dose response gradient was observed for total cooking dish years. Risk for lung cancer tends to increase with collegial effect of indoor environmental sources (p=0.022). Significant correlation was also observed for interaction of GST polymorphisms with some of dietary habits. Conclusions: We confirmed the important role of exposure of cooking oil emission and wood smoke, intake of smoked meat, smoked fish and soda (an alkali preparation used as food additives in Mizoram) and tobacco consumption for increase risk of lung cancer among Women in Mizoram.

• Asian-Australasian Journal of Animal Sciences
• /
• 제6권1호
• /
• pp.139-145
• /
• 1993

Biogas created from animal waste is a precious energy source. A practical and successful utilization of the biogas is not easy, because there lie some difficulties in biogas production and facilities investment. In this study, the requisites for a successful biogas utilization were discussed. The production results obtained in the previous operation of anaerobic digestion plant were used for the simulation. When the slurry heating was designed for constant biogas generation, depreciation costs of the facilities amounted 1,175,000 yen per year, and biogas productions at $24.5^{\circ}C$, $30.0^{\circ}C$ and $35.5^{\circ}C$ were $16.8m^3$, $17.6m^3$ and $25.1m^3$, respectively. Removal ratios of organic matters were not so high. At $35.5^{\circ}C$, energy value of the biogas produced was estimated 125.5 Mcal per day, and the following heat loss (y Mcal/day) was brought about by the temperature difference ($X^{\circ}C$) between the digester and atmosphere; y = 0.769X - 5.375. The costs of biogas production per cow were assumed to decrease according to enlargement of feeding scale, especially on scales of more than 30 cows. On recent levels of costs and prices of energy in Japan, they were nearly equal to 2 to 3 fold of the price of municipal mixed gas when a anaerobic digester was compulsorily heated and kept at $30.0^{\circ}C$ or $35.5^{\circ}C$.

• 대기
• /
• 제21권3호
• /
• pp.229-241
• /
• 2011

The continuous urbanizations by a rapid economic growth and a steady increase in population are expected to have a possible impact on meteorology in the downwind region. Long-term (1972~2007) trends of precipitation have been examined in the mid-Korean peninsula for the westerly condition only, along with the sensitivity simulations for a golden day (11 February 2009). During the long-term period, both precipitation amount (PA) and frequency (PF) in the downwind region (Chuncheon, Wonju, Hongcheon) of urban area significantly increased for the westerly and light precipitation ($PA{\leq}1mm\;d^{-1}$) cases, whereas PA and PF in the mountainous region (Daegwallyeong) decreased. The enhancement ratio of PA and PF for the downwind region vs. urban region remarkably increased, which implies a possible urbanization effect on downwind precipitation. In addition, the WRF simulation applied for one golden day demonstrates enhanced updraft and its associated convergence in the downwind area (about 60 km), leading to an increase in the cloud mixing ratio. The sensitivity experiments with the change in surface roughness demonstrates a slight increase in cloud water mixing ratio but a negligible effect on precipitation in the upwind region, whereas those with the change in heat source represents the distinctive convergence and its associated updraft in the downwind region but a decrease in liquid water, which may be attributable to the evaporation of cloud droplet by atmospheric heating induced by an increase in an anthropogenic heat. In spite of limitations in the observation-based analysis and one-day simulation, the current result could provide an evidence of the effect of urbanization on the light precipitation in the downwind region.

• 유기물자원화
• /
• 제14권4호
• /
• pp.93-103
• /
• 2006

바이오가스는 유기물의 혐기소화과정에서 생기는 부산물로 열에너지와 전기에너지로 사용되어왔다. 바이오디젤생산의 반응물과 연료로 사용되고 있는 메탄올의 수요는 꾸준히 증가하고 있다. 본 총설에서는 메탄올을 메탄올로 전환하는 직접부분산화법의 최근 발전 동향을 간략한 메탄올합성의 역사와 함께 다루었으며, 산업 규모에서 주로 사용되고 있는 증기개질반응과 현재 연구단계에서 발전하고 있는 촉매산화법을 비교하였다. 이 총설에서는 바이오가스로부터 메탄올전환의 가능성이 기술적인 측면과 경제적 실용성 면에서 제시되었다.

• 한국정밀공학회지
• /
• 제18권10호
• /
• pp.134-147
• /
• 2001

Laser cladding process accompanies phase transformations from melting (on heating) through solidifying (on cooling) at the same time within a small material volume and to final solid phase. The phase transformations are not reversible, but an irreversible thermodynamic process; they accompany either absorption or release of thermal energy (referred to latent heat) during transformation. Yet, most analyses on materials processed by laser as a heat source have been performed on models of neglecting the latent heat in the process and those did not Justify the simplification. With literatures on the laser material process, we have not place an answer to how little the assumption affects on analyses. This led us to our current study: the effects of latent heat on thermo-mechanical analysis. To this end, we developed a fairly accurate program accommodating an algorithm for enforcing the latent heat whenever necessary and ran it combining with ABAQUS$^{TM}$. The simulation techniques we used in this study were verified by directly comparing our prediction with experimental publications elsewhere; our numerical results agreed accurately with the experiments. On the effects of the latent heat, we performed two alternatives about considering the latent heat in analysis, and compared each other. As a result, we found that more accurate conclusions might come out when considering the latent heat in process analyses.s.

• 한국세라믹학회지
• /
• 제43권4호
• /
• pp.235-241
• /
• 2006

Mullite short fibers have been fabricated by adapting the Kneading-Drying-Calcination (KDC) process and characterized. The effect of the addition of foaming agent and calcination temperature on the formation of mullite fibers from coal fly ash, was examined. In the present work, ammonium alum $NH_4Al(SO_4)_2\;12H_2O$ synthesized trom coal fly ash and sodium phosphate $Na_2HPO_4\;2H_2O$ were used as foaming agents. After calcination at $1300^{\circ}C$ for 10 h and then etching with 20% HF solution at $50^{\circ}C$ for 5 h using a microwave heating source, the alumina-deficient $(AI_2O_3/SiO_2$ = 1.13, molar ratio) orthorhombic mullite fibers with a width of ${\sim}0.8mm$ (aspect ratio >30), were prepared from the coal fly ash with $AI_2O_3/SiO_2$ = 0.32, molar ratio by the addition of $NH_4AI(SO_4)_2\;12H_2O$, and with further addition of 2 wt% sodium phosphate. The excessive addition of sodium phosphate rather decreased the formation of mullite fibers, possibly due to the large amount of liquid phase prior to mullitization reaction.

• 한국태양에너지학회 논문집
• /
• 제28권3호
• /
• pp.7-14
• /
• 2008

400RT geothermal system which is the biggest capacity among on-operations at present in Korea is measured and evaluated on 23rd${\sim}$26th Jan. 2008 during those days building is not allowed owners and/or tenants to move in. The geothermal system is consist with vertical-typed 112 geothermal heat exchangers which are installed circle-like 1 row with 4m interval, and has 16 units of 25USRT geothermal-source heat pump(GSHP)s. And each 5 units of circulation pump are running for geothermal heat exchangers and hot water supplies. The followings are the results. The temperatures at G.L. -70m of 2 boreholes are varied quite similarly. The average temperature difference between inlet and outlet of geothermal pipes is $4.1^{\circ}C$, and that of hot water supply is $3.2^{\circ}C$, of Zone 3's each 4 GSHPs when being operated. Despite temperature fluctuations by heating loads, the average temperature difference between main pipes of inlet and outlet of geothermal heat exchangers is measured as $4.1^{\circ}C$. This study propose "Geothermal System COP" which includes not only consumed electric power by compressor but also circulation pumps and auxiliary utilities. By comparing the geothermal system COP with GSHP's performance specification, it is clear that the performances of GHSPs of this site are satisfied with the specification.

• 대한임상독성학회지
• /
• 제11권1호
• /
• pp.41-45
• /
• 2013

Following are brief statements about the delayed encephalopathy of a patient who recovered without disturbance of consciousness after acute carbon monoxide poisoning. A 72-year-old male was found without consciousness at home and then visited the ER center. Later we learned that the patient was using briquettes as a household heating source. Blood carbon monoxide hemoglobin level was 17.5%. As carbon monoxide poisoning was uncertain after the first interview with the patient, hyperbaric oxygen therapy was not administered at the early stage. After supplying 100% oxygen, the patient recovered consciousness, however, the strength of the lower limb muscle had decreased to class II. The patient showed continued weakening of the lower limb muscle and an increase of CPK; therefore, he was diagnosed as carbon monoxide intoxication and rhabdomyolysis and then admitted to the intensive care unit (ICU) for conservative treatment. During the hospitalization period, continued weakening of the lower limb muscle was observed and he was diagnosed as myopathy after EMG/MCV. However, he suddenly showed altered mentality on the 20th day of hospitalization, and underwent brain MRI. T2 weighted MRI showed typically high signal intensity of both globus pallidus and periventricular white matter; therefore, he was diagnosed as delayed carbon monoxide encephalopathy. This case showed delayed encephalopathy accompanied by rhabdomyolysis and myopathy of a patient who recovered without disturbance of consciousness.

• 한국재료학회지
• /
• 제17권4호
• /
• pp.227-231
• /
• 2007

Transparent conducting indium tin oxide (ITO) films were deposited onto the Polyethersulfone (PES) substrate by using a magnetron sputter type negative metal ion source. In order to investigate the influence of cesium (Cs) partial pressure during deposition and annealing temperature on the optoelectrical properties of ITO/PES film the films were deposited under different Cs partial pressures and post deposition annealed under different annealing temperature from $100^{\circ}C$ to $170^{\circ}C$ for 20 min at $3\;{\times}\;10^{-1}$ Pa. Optoeleetrical properties of ITO films deposited without intentional substrate heating was influenced strongly by the Cs partial pressure and the Cs partial pressure of $1.5\;{\times}\;10^{-3}$ Pa was characterized as an optimal Cs flow condition. By increasing post-deposition vacuum annealing temperature both optical transmission in visible light region and electrical conductivity of ITO films were increased. Atomic force microscopy (AFM) micrographs showed that the surface roughness also varied with post-deposition vacuum annealing temperature.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 1994년도 춘계학술대회강연 및 발표대회 강연및 발표논문 초록집
• /
• pp.6-6
• /
• 1994

Har dmaterials such as cemented carbides with or without coated layer, cermets, ceramics and diamond or c-BN high pressure sintered compact are used for cutting tools, wear -resistant parts, rock drilling bits and/or high pressure vessels. These hardmaterials contain not only hard phase, but also second consituent as the element for forming ductile phase and/or sintering aid, and the mechanical properties of each material depend on (1) the amount of the second constituent as well as (2) the grain size of the hard phase. The hardness of each material mainly depends on these two factors. The fracture strength, however, largely depends on other microstructur a1 factors as well as the above two factors. For all hardmaterials, the fracture strength is consider ably affected by (3) the size of microstructur a1 defect which acts as the fracture source. In cemented carbides, the following factors which are generated mainly due to the addition of the second constituent are also important; (4) the variation of the carbon content in the normal phase region free from V-phase and graphite phase, (5) the precipitation of $Co_3$ during heating at about $800^{\circ}C$,(6) the domain size of binder phase, and (7) the formation of ${\beta}$-free layer or Co-rich layer near the surface of sintered compacts. For cemented carbides coated with thin hard substance, the important factors are as follows; (8) the kind of coated substance, (9) the formation of ${\eta}$-phase layer at the interface between coated layer and substrate, (10) the type of residual stress (tension or compression) in the coated layer which depends on the kind of coating method (CVD or PVD), and (11) the properties of the substrate, and (12) the combination, coherency and periodicity of multi-layers. In the lecture, the details of these factors and their effect on the strength will be explained.