• 제목/요약/키워드: Heating methods

검색결과 1,007건 처리시간 0.026초

생산 초기 초음속 항공기 조종석의 고품질 공기 확보를 위한 burn-in test 연구 (A study on the burn-in test to accomplish high quality cockpit air of an ultra-sonic aircraft in the early stage of production)

  • 신재혁;박성제;서동연;정수헌
    • 한국항공우주학회지
    • /
    • 제44권10호
    • /
    • pp.871-876
    • /
    • 2016
  • 생산 초기의 초음속 항공기는 블리드 에어 덕트에 존재하는 생산용 자재의 부가 물질이 가열될 경우 조종실에 타는 냄새와 유사한 비정상적인 냄새가 조종실로 유입된다. 조종사가 이와 같은 냄새를 엔진의 화재와 같은 비상 상황으로 오인하는 것을 방지하기 위해 비정상적인 냄새의 원인 물질은 시험 비행 전에 burn-in test를 통해 제거되어야 한다. 그러나, 현재의 절차의 최고 온도보다 고고도 비행의 최고 온도가 더 높기 때문에 냄새를 완벽히 제거 할 수 없다. 본 논문은 고고도 비행의 열적 상황을 분석하여 개선된 burn-in test 절차를 제시한다. 비연속적인 유량 조절, 단위 시간당 높은 온도 변화율, 응축기와 터빈의 한계 온도 차이 때문에 현재의 절차로는 고고도 조건을 모사하지 못하는 것이 확인되었다. 이러한 한계를 극복하기 위해 램에어 입구 제어를 통해 연속적 유량 조절이 가능한 burn-in test 절차를 제시하였다. 제시된 방법을 통해 블리드 에어 온도가 지상에서 고고도 비행 조건 이상임을 확인하였으며, 비행 시험을 통해 비정상적인 냄새를 제거할 수 있음을 검증했다.

Physico-chemical properties of late-incubation egg amniotic fluid and a potential in ovo feed supplement

  • Omede, A.A.;Bhuiyan, M.M.;lslam, A.F.;Iji, P.A.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제30권8호
    • /
    • pp.1124-1134
    • /
    • 2017
  • Objective: This study explored the physico-chemical properties of late-incubation egg amniotic fluid and a potential in ovo feed (IOF) supplement. Methods: Amniotic fluid was collected from broiler breeders (Ross 308, 51 weeks and Cobb 500, 35 weeks) on day 17 after incubation. A mixture of high-quality soy protein supplement - Hamlet Protein AviStart (HPA) was serially diluted in MilliQ water to obtain solutions ranging from 150 to 9.375 mg/mL. The mixtures were heat-treated (0, 30, 60 minutes) in a waterbath ($80^{\circ}C$) and then centrifuged to obtain supernatants. The amniotic fluid and HPA supernatants were analysed for their physico-chemical properties. Results: Only viscosity and $K^+$ were significantly (p<0.05) different in both strains. Of all essential amino acids, leucine and lysine were in the highest concentration in both strains. The osmolality, viscosity and $pCO_2$ of the supernatants decreased (p<0.05) with decreasing HPA concentration. Heat treatment significantly (p<0.05) affected osmolality, pH, and $pCO_2$, of the supernatants. The interactions between HPA concentration and heat treatment were significant with regards to osmolality (p<0.01), pH (p<0.01), $pCO_2$ (p<0.05), glucose (p<0.05), lactate (p<0.01) and acid-base status (p<0.01) of HPA solutions. The $Ca^{2+}$, $K^+$, glucose, and lactate increased with increasing concentration of HPA solution. The protein content of HPA solutions decreased (p<0.05) with reduced HPA solution concentrations. The supernatant from 150 mg/mL HPA solution was richest in glutamic acid, aspartic acid, arginine and lysine. Amino acids concentrations were reduced (p<0.05) with each serial dilution but increased with longer heating. Conclusion: The values obtained in the primary solution (highest concentration) are close to the profiles of high-protein ingredients. This supplement, as a solution, hence, may be suitable for use as an IOF supplement and should be tested for this potential.

옻칠의 품등 구분 (I) 전통적인 방법에 의한 옻칠의 품등구분 (Grade Classification of Urushi Lacquer (I) Grade Classification of Urushi Lacquer by Traditional Method)

  • 노정관;김윤근
    • Journal of the Korean Wood Science and Technology
    • /
    • 제36권6호
    • /
    • pp.105-112
    • /
    • 2008
  • 옻칠은 채취된 산지별, 기후변화별, 채취시기별, 저장 등 각각의 요인에 따라 구성성분이 달라지며, 도료로서의 품등도 달라지는 성질을 가진 천연도료라는 점을 고려할 때 옻칠의 품등 구분은 매우 어렵다. 전통적 방법에 의한 옻칠의 품등구분은 옻칠종사자 10명의 패널에 대한 관능평가에 의해 실시하였다. 옻칠종사자들의 전통적인 옻칠 품등구분 방법의 공통점은 색조, 냄새, 점도, 한지 위 퍼짐성, 유리판 위 색조 및 건조성에 의해 판단하고 있으며, 그 외 한지 위 문지르기, 알코올램프 가열에 의한 감량 조사가 있었다. 패널요원 10인에 의한 5개 항목에 대한 전체평균의 결과, 중국산 생칠(E)이 7.03로서 가장 우수하였고, 그 다음이 일본산 생칠(C) 6.84, 한국산 생칠(A) 6.41, 중국산 생칠(D) 5.27 그리고 한국산 화칠(B) 2.50 순으로 나타났다. 그러나, 각 패널들이 평가한 결과는 한지위 퍼짐성에 의한 품등구분 이외에는 서로 다른 견해를 나타내는 경우가 있어 전통적인 방법만에 의한 품등구분에는 객관성과 공정성이 결여될 소지가 있을 것으로 판단된다.

IBC형 태양전지를 위한 균일하게 증착된 비정질 실리콘 층의 광섬유 레이저를 이용한 붕소 도핑 방법 (Boron Doping Method Using Fiber Laser Annealing of Uniformly Deposited Amorphous Silicon Layer for IBC Solar Cells)

  • 김성철;윤기찬;경도현;이영석;권태영;정우원;이준신
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2009년도 하계학술대회 논문집
    • /
    • pp.456-456
    • /
    • 2009
  • Boron doping on an n-type Si wafer is requisite process for IBC (Interdigitated Back Contact) solar cells. Fiber laser annealing is one of boron doping methods. For the boron doping, uniformly coated or deposited film is highly required. Plasma enhanced chemical vapor deposition (PECVD) method provides a uniform dopant film or layer which can facilitate doping. Because amorphous silicon layer absorption range for the wavelength of fiber laser does not match well for the direct annealing. In this study, to enhance thermal affection on the existing p-a-Si:H layer, a ${\mu}c$-Si:H intrinsic layer was deposited on the p-a-Si:H layer additionally by PECVD. To improve heat transfer rate to the amorphous silicon layer, and as heating both sides and protecting boron eliminating from the amorphous silicon layer. For p-a-Si:H layer with the ratio of $SiH_4$ : $B_2H_6$ : $H_2$ = 30 : 30 : 120, at $200^{\circ}C$, 50 W, 0.2 Torr for 30 minutes, and for ${\mu}c$-Si:H intrinsic layer, $SiH_4$ : $H_2$ = 10 : 300, at $200^{\circ}C$, 30 W, 0.5 Torr for 60 minutes, 2 cm $\times$ 2 cm size wafers were used. In consequence of comparing the results of lifetime measurement and sheet resistance relation, the laser condition set of 20 ~ 27 % of power, 150 ~ 160 kHz, 20 ~ 50 mm/s of marking speed, and $10\;{\sim}\;50 {\mu}m$ spacing with continuous wave mode of scanner lens showed the correlation between lifetime and sheet resistance as $100\;{\Omega}/sq$ and $11.8\;{\mu}s$ vs. $17\;{\Omega}/sq$ and $8.2\;{\mu}s$. Comparing to the singly deposited p-a-Si:H layer case, the additional ${\mu}c$-Si:H layer for doping resulted in no trade-offs, but showed slight improvement of both lifetime and sheet resistance, however sheet resistance might be confined by the additional intrinsic layer. This might come from the ineffective crystallization of amorphous silicon layer. For the additional layer case, lifetime and sheet resistance were measured as $84.8\;{\Omega}/sq$ and $11.09\;{\mu}s$ vs. $79.8\;{\Omega}/sq$ and $11.93\;{\mu}s$. The co-existence of $n^+$layeronthesamesurfaceandeliminating the laser damage should be taken into account for an IBC solar cell structure. Heavily doped uniform boron layer by fiber laser brings not only basic and essential conditions for the beginning step of IBC solar cell fabrication processes, but also the controllable doping concentration and depth that can be established according to the deposition conditions of layers.

  • PDF

한국산 두류(頭類)의 Trypsin 저해(沮害) 활성(活性) 및 적혈구(赤血球) 응집(凝集) 활성(活性) (Trypsin Inhibitor and Hemagglutinating Activities of Some Minor Beans in Korea)

  • 강명희;김용화;이서래
    • 한국식품과학회지
    • /
    • 제12권1호
    • /
    • pp.24-33
    • /
    • 1980
  • 한국산 두류 중 대두를 비롯한 팥, 녹두, 강낭콩에 대하여 trypsin 저해(沮害) 활성(活性)과 적혈구(赤血球) 응집(凝集) 활성(活性)을 측정하고 이들을 가열 처리에 의한 파괴 효과를 실험한 결과는 다음과 같다. 1. 각 두류의 건물(乾物) 중량 당 저해(沮害) 활성도(活性度) (% [TU] inhibited/mg)는 대두가 가장 높아 79.9를 나타낸 반면 팥, 강낭콩은 각각 46.4, 43.2로 대두의 반정도이었으며 녹두는 17.7로 제일 적었다. 이를 단백질 중량당으로 환산하면 팥이 제일 높아 222를 보였고 그 다음이 대두 194, 강낭콩 170의 순이었으며 녹두는 제일 낮아 75를 보였다. 2. 열에 의한 trypsin 저해(沮害) 활성도(活性度)의 파괴율은 팥, 녹두가 각각 $85{\sim}87,\;87{\sim}94\;%$로 높았고 강낭콩, 대두는 각각 $76{\sim}79,\;67{\sim}72\;%$로 낮았다 그러나 boiling과 autoclaving 간의 가열 방법에 따른 차이는 발견할 수 없었다. 3. 각 두류의 토끼 혈액에 대한 적혈구(赤血球) 응집(凝集) 활성(活性)(hemagglutinating unit/g)은 팥에서는 나타나지 않았고 강남콩이 제일 많아 건물 1g당 48,300을 보인데 비해 대두는 18,000, 녹두는 136이었다. 이를 단백질 중량당으로 환산하면 마찬가지 경향을 보여 강남콩 190,600, 대두 43,700, 녹두 581로 나타났다. 이들 두류의 적혈구(赤血球) 응집(凝集) 활성(活性)은 가열 처리에 의하여 모두 파괴되었다.

  • PDF

용매추출 및 화학적 정제법에 의한 고품질의 포도씨유의 제조 (Preparation of High Quality Grape Seed Oil by Solvent Extraction and Chemical Refining Process)

  • 최상원;정의선;이기택
    • 한국식품저장유통학회지
    • /
    • 제12권6호
    • /
    • pp.600-607
    • /
    • 2005
  • 포도씨을 이용한 고부가가치의 포도씨유 제조기술 개발 및 시제품을 생산하기위해 먼저 일반 재배 및 유기농 재배 포도로부터 각각 수거된 포도씨의 수율, 및 기능성성분(지방산, 피토스테롤, 토코페롤, 총카테킨 및 4가지 카테킨 조성)의 차이를 측정하여 비교하였다. 다음, 용매추출법과 화학적 정제방법에의한 포도씨로부터 고품질의 포도씨유의 제조기술을 개발하고 시제품을 생산하한 결과는 다음과 같다. 일반 재배 및 유기농 재배 포도로부터 얻어진 포도씨유 및 추출물의 수율 그리고 기능성성분(지방산, 피토스테롤, 토코페롤, 총카테킨 및 4가지 카테킨류)의 함량을 측정한 후 비교한 결과 대체적으로 일반 재배 및 유기농 재배 포도씨의 기능성성분의 함량에는 큰 차이가 없었다. 건조포도씨(1.0톤)를 볶음처리 후 분쇄하여 노르말-헥산으로 탈지하고 얻은 포도씨 원유를 탈검($0.15\%$ 인산) 및 탈산($20\%$ NaOH 용액) 처리 후 수증기증류 장치($240^{\circ}C$, 2시간, 5 mmHg)를 이용하여 탈색, 탈향 및 탈취공정을 차례로 거치면서 고품질의 포도씨유의 제조기술을 확립하였으며, 아울러 그로부터 최종 포도씨유 제품(50kg, 수율: $5.0\%$/건조 포도씨)을 생산하였다.

고온을 받은 고강도 콘크리트의 강도특성 (Strength Properties of High-Strength Concrete Exposed at High Temperature)

  • 윤현도;김규용;한병찬
    • 콘크리트학회논문집
    • /
    • 제14권5호
    • /
    • pp.698-707
    • /
    • 2002
  • 본 연구에서는 건축물에 발생된 화재와 같이 단기간에 빠르게 가열되는 조건하에 고강도 콘크리트의 압축강도특성을 구명하기 위하여 기존의 내화실험결과를 수집 및 분석하며 아울러 현행 노출온도에 따른 압축강도의 상관관계 기준식의 고강도 콘크리트에 적용 가능성을 검토하고자 한다. 노출온도에 따른 고강도 콘크리트의 압축강도 변화 특성은 내화실험방법(재하, 비재하 및 비재하 잔여 강도실험) 및 골재종류(천연 및 경량골재)에 따라 다르게 나타나므로 실험방법 및 골재종류별로 나누어 비교 및 분석하였다. 고강도 콘크리트의 압축강도 특성은 보통강도와는 노출온도에 따라 다르게 나타났으며 노출온도 약 2$0^{\circ}C$에서 40$0^{\circ}C$범위에서 보통강도 콘크리트보다 급격하게 압축강토가 저하되었으며 40$0^{\circ}C$ 이상에서는 큰 차이를 보이지 않았다. 80$0^{\circ}C$에서 고강도 콘크리트의 압축강도는 상온 압축강도의 30%까지 감소되었다. 노출온도에 따른 압축강도 및 탄성계수 변화에 대한 실험결과와 유럽 기준을 비교하여 볼 때 현행 기준식은 안전측이지 못하므로 화재에 노출된 고강도 콘크리트의 압축강토 및 탄성계수 평가에 적응 가능성이 결여된 것으로 평가되었다.

석탄폐석의 자열소성을 이용한 토양개량용 펠릿의 제조와 특성 (Characteristics of Soil Conditioner Pellets Fabricated by Self-propagating Combustion Methods Using Coal Refuse)

  • 김병곤;이계승;남철우;박종력
    • 한국토양비료학회지
    • /
    • 제41권6호
    • /
    • pp.379-386
    • /
    • 2008
  • 토양개량방법의 하나로서 다공성 소성 과립체를 토양에 사용하는 방법을 적용하고자 하였다. 석탄폐석을 토양개량제의 원료로 사용하면 자열소성방법에 의해 저비용으로 과립체를 생산할 수 있고, 더불어 국내에 대량으로 적치되어 있는 석탄폐석을 활용할 수 있는 방안도 될 것임을 착안하여, 석탄폐석을 분쇄, 과립하고 자열소성방법으로 소성하여 과립(pellet)을 제조한 후 이의 다공체로서의 특성과 수분보유특성, pH등을 확인하였다. 고정탄소량이 약 28%인 시료 HCR을 고령토와 1:4의 무게비(20%)로 혼합하여 제조한 과립과 고정탄소가 약 9.66%인 LCR시료만을 사용한 과립을 자열소성한 결과, 별도의 가열에너지의 공급 없이 최대온도 $1200^{\circ}C$ 이하에서 연속적인 소성이 가능하였다. 이렇게제조한 과립체를 고령토만 사용하여 제조한 일반 소성 점토과립과 비교하였을 때 평균공극의 크기가 커졌음이 확인되었다. 이렇게 변화된 공극의 특성으로 인해 HCR과 LCR 과립의 내부에 흡수된 수분이 kaolin 과립에 비해 더 낮은 potential에서 방출되었고, 식물이 더 이용하기 쉬운 상태로 수분이 보유됨을 확인하였다. 그리고 자열소성한 과립은 kaolin 과립에 비해 높은 포장용수량과 유효수분의 값을 나타내었다. 포장용수량은 HCR과 LCR 과립이 각각 47.64, 38.43mL/100g값을 나타내었고, 유효수분의 양은 각각 38.39과 28.49mL/100g으로 나타났다. 자열소성한 과립의 pH는 6~8로서 토양에 활용이 가능함을 확인하였다.

플라스틱온실의 피복방식에 따른 보온 및 광투과 성능 평가 (Estimation of Heat Insulation and Light Transmission Performance According to Covering Methods of Plastic Greenhouses)

  • 이현우;김영식;심상연;이종원;소레이멘디옵
    • 생물환경조절학회지
    • /
    • 제22권3호
    • /
    • pp.270-278
    • /
    • 2013
  • 본 연구는 우리나라 상업용 온실의 보온성능 및 광투과 성능을 개선할 수 있는 피복방식을 결정하는데 필요한 자료를 제공하기 위하여 토마토 재배용 실험온실의 세 가지 피복방식에 대한 보온효과 및 광투과 특성을 평가하였으며 결과를 요약하면 다음과 같다. 공기주입 이중피복온실과 관행 이중피복온실의 관류열손실량이 거의 비슷한 것으로 나타났으나 외부기온이 비슷할 때 피복재와 보온커튼 사이의 온도가 공기주입 이중피복온실이 더 낮게 나타난 것은 공기주입 이중피복온실의 경우 나비식 천창의 틈새로 인한 환기전열손실이 크기 때문인 것으로 판단된다. 따라서 공기주입 이중피복온실에서 나비식 천창을 사용할 경우 틈새 환기전열손실을 줄일 수 있는 대책이 수립되어야 할 것으로 판단된다. 일중피복 온실과 관행이중피복온실의 관류열전달계수에 대한 온실 실험결과와 모형실험결과를 비교한 결과 모두 비슷한 값을 나타내었다. 이러한 결과는 측정된 관류열전달계수가 타당성 있는 값임을 보여주는 것이며 향후 온실의 난방설계시 직접 활용할 수 있을 것으로 기대된다. 공기주입 이중피복온실이 비록 일중피복온실보다는 광투과율이 낮으나 동일한 이중피복온실인 관행이중피복온실보다 광투과율이 높기 때문에 보온을 위해서 이중피복을 설치할 경우에 광투과율을 확보하기 위해서는 공기주입 이중피복방식을 채택하는 것이 바람직할 것으로 판단된다. 공기주입 이중피복온실에 비해 일중피복온실의 피복재 내부표면에서 발생하는 결로량이 큰 이유는 일중피복온실의 피복재 내부표면온도가 훨씬 낮기 때문에 피복재에서의 포화습도가 작아져 내부공기의 절대습도와의 차이가 증가하기 때문인 것으로 판단된다.

원발성 간암의 방사선치료및 온열요법의 병용치료 효과 (Therapeutic Effect of Combined Radiotherapy and Hyperthermia in Primary Hepatocellular Carcinoma)

  • 강기문;최일봉;계철승;최병옥;정수미;김인아;한성태;선희식;정규원;신경섭
    • Radiation Oncology Journal
    • /
    • 제12권2호
    • /
    • pp.191-199
    • /
    • 1994
  • Purpose : This study was undertaken to show the clinical results of combined radiotherapy and hyperthermia in primary hepatoma Materials and Methods : Between December 1989 and March 1993, 50 patients with hepatomas were treated by combined radiotherapy and hyperthermia. Among them, we analyzed retrospectively 33 patients who received the complete course of treatment. The ages of the patients ranged from 36 to 75(mean age: 55.5 years). Twenty-six patients ($78.8\%$) were men, and 7 ($21.2\%$ were women. According to Child's classification, nine patients ($27.3{\%}$) were A group, 9 ($27.3\%$) were B group, 15 ($45.4\%$) were C group. Radiation therapy was done by a 6 MV and 15 MV linear accelerator. Patients were treated with daily fractions of 150-180 cCy to doses of 2550 cGy -4950 cGy (median : 3000 cGy). Local hyperthermia was done by 8 MHZ RF capacitive heating device (Cancermia. Green Cross Co., Korea), 50-60 min/session, 1-2 sessions/wk, and 8.5 sessions (median number)/patient. We analyzed the prognostic factors including age, sex, tumor type, Child's classification, $\alpha$-fetoprotein, liver cirrhosis, ascites, portal vein invasion, esophageal varix, number of hyperthermia, chemotherapy, total bilirubin level, Karnofsky perfomance status. Results : The overall 1-year survival was $24.2\%$, with a mean survival of 10months. Of 33 patients, tumor regression (PR+MR) was seen in $30.4\%$, no response was seen in $52.2\%,\;17.4\%$ patient was progressed. In patients who had tumor regression, the overall 1-year survival was $42.1\%$ with a mean survival of 14 months. Factors influencing the survival were sex (p=0.05), tumor type (p=0.0248), Child's classification (p=0.0001), liver cirrhosis (p=0.0108), ascites (p=0.0009), and Karnofsky perfomance status (p=0.0028). Complications developed in 28 patients, including 18 hot pain,5 fat necrosis, 3 transient fever, 2 nausea and vomiting. Conclusion : In this study, the results suggests that combined radiotherauy and hyperthermia may improve the survival rate of hepatoma.

  • PDF