• Transactions of the Society of Information Storage Systems
• /
• v.3 no.3
• /
• pp.149-153
• /
• 2007

Perpendicular patterned magnetic media have been regarded as a prime candidate to achieve an ultra-high magnetic recording density of over 1 Tera-bits/$inch^2$. Patterned magnetic media with nanoscale patterns have been fabricated using various nanopatterning technologies. We focused on the two technical issues of nanoinjection molding technology. Firstly, we have investigated a cost-effective method to fabricate metallic stamps. Secondly, we focused on the analysis of nanoinjection molding with passive heating, where the replication of 50 nm nanopillar arrays was successful. The effect of the thermal insulation layer on the replication quality was examined by analytical and experimental methods. Finally, we deposited a magnetic layer on a injection molded nanopillars and measured. Our methodology can provide cost-effective mass-production for patterned magnetic media.

• 한국전산유체공학회:학술대회논문집
• /
• 2009.11a
• /
• pp.145-150
• /
• 2009

In this study, characteristics of microwave and convective drying are studied by using a multiphase porous media model. Temperature and moisture profiles for hot-air convective heating and microwave heating of 1-D porous media with varying time and space are numerically investigated. This result shows the microwave drying method is more effective than the convective drying method. Comparing to convective drying, microwave drying can increase temperature and evaporation rate significantly since microwave generates internal heat and increases internal pressure, which results in moisture movement toward the surface on which moisture is vaporized.

• Toxicological Research
• /
• v.14 no.3
• /
• pp.301-306
• /
• 1998

This experiment was carrid out to know the effects of heating and serum on hydroxyl radicals in embryonic mouse forebrain (cerebrum) culture. The heating to mouse embryonic cerebrum cells in culture was done in a water bath at 43${\circ}C$ for 60min. After that, two supernatants were prepared at 20 hrs and 48 hrs respectively after heat treatment to the brain cells. To find out the heating effects on neuron cells, mouse cerebrum cells (13 embryonic day) were cultured in hydroxyl radical generation system composed of 20mU/ml glucose oxidase (GO system), using condition of normal culture media (MEM, 5% serum, 5% $CO_2$or supernatant prepared after heating at 43${\circ}C$ for 60 min in a water bath. Supernatant prepared at 20 hrs after heat treatment had a greater protective effects against hydroxyl radical than supernatant prepared at 48 hrs after heat treatment . Otherwise, the protective effect of serum against hydroxyl radicals in the cultured brain cells is higher than that in the heat treatment. These results indicated that serum in culture media reduced cytotoxicity of hydroxyl radicals in mouse forebrain culture, also that heat treatment showed the protective effects against hydroxyl radicals generated with 20mU/ml GO system in mouse forebrain culture.

• Textile Coloration and Finishing
• /
• v.11 no.3
• /
• pp.49-57
• /
• 1999

The effect of padding solution for the microwave heat dyeing of polyester fabric was studied variously. The dyeing property of polyester fabric varied with the kinds of added chemicals in the padding solution. Polyester fabrics impregnated in aqueous urea solution and aqueous sodium chloride solution for 10 minutes and then dyed for 7 minutes by microwave apparatus(2450 MHz, 700 W) under optimum conditions give good exhaustion. An aqueous solution of urea and a sodium chloride solution was more effective than water as padding solution for microwave heating dyeing. The K/S values of dyed polyester fabric by microwave were significantly affected by the type of solvent added in padding media and its concentration. Added solvents, n-hexane, acetone and dimethyl formamide were also more effective than water as padding media for the microwave heating dyeing. It is assumed that the effect of used solvents on dyeing property of polyester fabrics depends on the solubility parameter difference between solvent and polyester fabric.

• Analytical Science and Technology
• /
• v.30 no.3
• /
• pp.138-145
• /
• 2017

Microwave-assisted organic synthesis has gained a remarkable interest over the past years because of its advantages - (i) rapid energy transfer and superheating, (ii) higher yield and rapid reaction, (iii) cleaner reactions. Ionic liquids are well known for their unique properties such as negligible vapor pressure and high thermal stability. With these properties, ionic liquids have gained increasing attention as green, multi-use reaction media. Recently, ionic liquids have been applied as reaction media for biocatalysis. Lipase-catalyzed reactions in ionic liquids provide high activity and yield compared to conventional organic solvents or solvent free system. Since polar molecules are generally good absorbent to microwave radiation, ionic liquids were investigated as reaction media to improve activity and productivity. In this study, therefore, the effect of microwave irradiation in ionic liquids was investigated on lipase catalyzed reactions such as benzyl acetate synthesis and caffeic acid phenethyl ester synthesis. Comparing to conventional heating, microwave heating showed almost the same final conversion but increased initial reaction rate (3.03 mM/min) compared to 2.11 mM/min in conventional heating at $50^{\circ}C$.

• Transactions of the Society of Information Storage Systems
• /
• v.3 no.3
• /
• pp.144-148
• /
• 2007

In this paper, we analyzed the effect of the pattern height on the readback signal characteristics of the magnetic nanopillar tops and trench bottoms. In addition, we discuss the applicability of the present method to the production of patterned magnetic media, which can be obtained by depositing magnetic thin films on the molded nanopillars with passive heating. We found that the individual magnetic island deposited on each molded nanopillars with passive heating is a single magnetic domain and confirmed that its magnetization can be successfully reversed by applying an external magnetic field.

• Journal of Korean Society for Atmospheric Environment
• /
• v.23 no.E2
• /
• pp.74-81
• /
• 2007

Feasibility test for a biofilter was performed to treat VOCs. The applied loading rate to the biofilter was calculated between 60 to $3,700\;kg\;COD/m^3$. Trimethyl-pentene and trimethyl-hexene were the two most dominant compounds and they occupy about 85 percent. During the acclimation period, it is desirable for a biofilter to receive relatively lower VOCs concentration and flow rate, until it can adjust to new substrate and operational environment. Temperature at various points inside the biofilter reactor was observed with more than 23 temperature sensors. With steam heating, temperatures of the top sections of the media were greater than those of bottom sections. Without steam heating, intermediate stages generally had higher temperature measurement than those of bottom and top stages. Because the pH values for different biofilter materials vary significantly, measurement of the pH for the mixture of different combinations of biofilter materials is necessary. Based on the types and brands of media, the measured pH ranged from 5.38 to 9.10. The range of measured pH of different mixtures with perlite, compost, saw dust, peat moss, limestone, vermiculite was 7.05 to 8.62.

• Transactions of the Korean hydrogen and new energy society
• /
• v.28 no.4
• /
• pp.392-400
• /
• 2017

An experimental study was conducted to investigate behavior of steel surface oxidation with characteristics of the combustion. The excess entalphy combustion in porous media system was applied to implement the direct radiation heating system. The surface oxidation thickness (SOT) of fuel-lean was thicker than the SOT of fuel-rich. Also, the SOT was increased by increasing residence time. Detailed explanations were given by SEM and EDS analysis.

• Journal of Bio-Environment Control
• /
• v.19 no.4
• /
• pp.189-194
• /
• 2010

A multi line electric tube consisted of XL pipes contained with 2~4 hot wires and water in it. The specification of one meter length multi-line electric tube was investigated and the proper number in the multi-line electric tube was determined. A multi line electric tube with three hot wires were found to be the most efficient for the media heating control system. Temperature rise of medium in the rice hulls media was faster than that in the perlite media, showed better insulation effect of rice hulls media. Temperature rise of medium with mulching on the top of the bed was faster than without mulching, resulted in the beneficial effect of temperature rise with mulching. The regression model for the rice hulls media with mulching air temperature of $5^{\circ}C$ were a = -0.1458 and b = -0.1088. Using the model, the temperature rise of medium during low temperature season can be predicted for the various media according to the different depths.

• Korean Journal of Veterinary Research
• /
• v.15 no.1
• /
• pp.75-81
• /
• 1975

The rate of growth of Leptospires were studied by culturing in Korthof's media and Cox's liquid media which were treated at four different temperatures. The effect of thiamine hydrochloride in the culture of leptospires were also studied. The results obtained were summerized as followings: 1. The best growth of Leptospira icterohaemorrhagiae and Leptospira canicola was observed in Korthof's media with the rabbit serum heated for 60 minutes at $56^{\circ}C$. 2. A good degree of growth of Leptospira icterohaemorrhagiae and Leptospira canicola was observed in both Cox's liquid media with rabbit serum heated for 30 minutes at $100^{\circ}C$ and with fresh rabbit serum. 3. The growth of Leptospira was enhanced by adding small amount of thiamine to the both media which were shown to be unsatisfactory for the growth of the organisms. 4. Culture of leptospires were attained by simply heating for 30 minutes at $100^{\circ}C$ both Korthof's media and Cox's liquid media containing rabbit serum obtained without aspetic procedures.