DOI QR코드

DOI QR Code

A Study on Behavior of Steel Surface Oxidation with Characteristics of the Combustion

연소 특성에 따른 강판 표면 산화거동에 관한 연구

  • KIM, SEULGI (Department of Aerospace Engineering, Sunchon National University School) ;
  • KANG, KIJOONG (Department of Mechanical Engineering, Pusan National University Graduate School) ;
  • LEE, KEEMAN (School of Mechanical and Aerospace Engineering, Sunchon National University)
  • 김슬기 (순천대학교대학원 우주항공공학과) ;
  • 강기중 (부산대학교대학원 기계공학과) ;
  • 이기만 (순천대학교 기계.우주항공공학부)
  • Received : 2017.07.31
  • Accepted : 2017.08.30
  • Published : 2017.08.30

Abstract

An experimental study was conducted to investigate behavior of steel surface oxidation with characteristics of the combustion. The excess entalphy combustion in porous media system was applied to implement the direct radiation heating system. The surface oxidation thickness (SOT) of fuel-lean was thicker than the SOT of fuel-rich. Also, the SOT was increased by increasing residence time. Detailed explanations were given by SEM and EDS analysis.

Keywords

References

  1. H. S. Park and K. J. Riu, "Effect of Combustion Characteristics of the Burners for Non-Oxidizin Direct Fired Furnaces on the Oxidation of the Surface of Steel Plate", Mechanical Eng. Korea Society, Vol. 23, 1999, pp. 330-341.
  2. T. Takno and K. Sato, "An Excess Entahlpy Flame Theory", Combust. Sci. Tech., Vol. 20, 1979, pp. 73-84. https://doi.org/10.1080/00102207908946898
  3. J. R. Howell, M. J. Hall and J. L. Ellzey, "Combustion of Hydrocarbon Fuels within Porous Inert Media", Prog. Energy Combust. Sci, Vol. 22, 1996, pp. 121-145. https://doi.org/10.1016/0360-1285(96)00001-9
  4. M. Katsuki, Y. Mizutani, T. Ogawa, and K. Hatta, "The Oxidation Behavior of Metal Surface in a Flame", JSME Int. Jr., Series II, Vol. 35, No. 1, 1990, pp. 110-115.
  5. D. Huin, P. Plauder, and J. B. Leblond, "Oxidation of Metals", 64, 2005, pp. 132-133
  6. N. Birks, G. H. Meier, and F. S. Pettit, "Introduction to the High Temperature Oxidation of Metals", Vol. 2, pp. 101-110.
  7. Y. Suzuki, T. Yamashita, and Y. sugimoto, "Chemistry of Nanomolecular Systems: Towards the Realization of Molecular Devices", ISIJ Int., 49, 4, 2009, pp. 564-573. https://doi.org/10.2355/isijinternational.49.564
  8. F. M. Pereira, A. A. M. Oliveira, and F. F. Fachini, "Maximum Superadibatic Temperature for Stabilized Flames within Porous Inert Media", Combust. Flame, Vol. 158, 2011, pp. 2283-2288. https://doi.org/10.1016/j.combustflame.2011.04.001
  9. J. B. Lee, " Effect of Alloying Elements and Annealing Condition on Surface Oxidation Behavior during Annealing of 25 mass % Mn Steel Sheet", Council of the graduate school of Kyunpook national university, 2008, pp. 1-50.
  10. M. S. Kim, "Study on Surface Oxidation and Galvanizability of TRIP Steel",Council of the graduate school of Sunchon national university, 2013, pp. 1-157.