• The Bulletin of The Korean Astronomical Society
• /
• v.43 no.2
• /
• pp.58.1-58.1
• /
• 2018

In the solar atmosphere, below the region of temperature minimum, temperature decreases with height and above it, temperature increases with height. Therefore the inference of temperature minimum is a basis of the study about the solar atmosphere and heating problem. The temperature of the temperature minimum region can be inferred from acoustic cutoff frequency. According to a recent study the acoustic cutoff frequency is related to the peak frequency of the power spectrum the chromospheric three-minute velocity oscillations. Using this relationship, we infer the temperature of temperature minimum. The three minute velocity oscillation and its power spectrum are obtained for a pore observed with the Fast Imaging Solar Spectrograph (FISS) $H{\alpha}$ band. We present the inferred temperature and compare it with the temperature of Maltby model. We also investigate the effect of the inclination of magnetic field on the temperature minimum.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.16 no.2
• /
• pp.373-379
• /
• 2002

This paper was the design of aerosol generator for inhalation toxicology study of lead and evaluation with real time monitoring, and applied several engineering methodology to classical aerosol generator to cope with it's disadvantages. According to the testing conditions, source temperature 50℃ and inlet-duct band heater temperature 150℃, aerosol generation results for sodium chloride and lead acetate were as followings: CPM(Count Per Minute) for Sodium chloride that used for the testing material in aerosol generation and inhalation system was decreased in the 2nd and the 3rd hour's serial trials, but CVs(coefficient of variation) were maintained within 10%. CPMs for 5 and 2.5 gram of lead acetate that used for aerosol generation and inhalation exposure of lead showed similar results because of the sedimentation of lead acetate on piezoelectric crystal with time. For that reason, heating and mixing of nebulizing solution will be needed to generate lead aerosol with stable profile and maximum generation efficiency. Fluctuations of 10 and 5 gram lead acetate were low but 2.5gram was high. However, CVs for 10, 5, and 2.5gram lead acetate were within 10%. Considering the theoretical efficiencies for sodium chloride and lead acetate, 5gram sodium chloride and 2.5gram lead acetate were appropriate choice. Aerosol generation characteristics for two materials with 1 hour interval were different with respect to the fluctuation of CPM and the decrease to 10gram in it's material. For that reason, sodium chloride can not be used to estimate the aerosol generation and it's related parts for lead acetate. According to the testing conditions, source temperature 20, 50, 70℃, and inlet-duct band heater temperature 20, 50, 100, 150, 200℃, aerosol generation results for sodium chloride and lead acetate were as followings: Excluding inlet-duct band temperature 200℃, maximum CPM for sodium chloride was manifested in source temperature 70℃ with each inlet-duct band temperature conditions. We suggest that this condition was the optimum in the design of aerosol generator, inhalation system, and the testing. Maximum CPMs for 10, 5, and 2.5gram sodium chloride were from source temperature 70℃ and inlet-duct band temperature 20℃. Excluding inlet-duct band temperature 50, 200℃, maximum CPMs for lead acetate were indicated in source temperature 50℃ with each inlet-duct band temperature conditions. We suggest that this condition was the optimum in the design of aerosol generator, inhalation system, and the testing for lead inhalation study. Source and inlet-duct band temperatures for 10, 5, 2.5gram lead acetate were 50 and 100℃, 50 and 100℃, 50 and 150℃, respectively. In conclusion, considering above 2 paragraphs of results for aerosol generation, 5gram efficiencies for sodium chloride, lead acetate were higher than 2.5gram's. If inlet-duct band temperature was same, aerosol generation was increased with increase of source temperature. To get maximum aerosol generation will be the conditions that set the appropriate inlet-duel band temperature for each materials and increase the source temperature.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.31 no.1
• /
• pp.1-6
• /
• 2002

Synthesis of new active protein was investigated by heat-treatment and fermentation of kidney beans with Bacillus subtilis ATCC 51189. The amount of water-soluble protein in raw kidney bean (raw protein, RP) was greatly reduced by heating (heated protein, HP) and several new amino acids were synthesized by fermentation. The molecular weights of proteins determined by SDS-PAGE were 118 kDa for RP and a new band of 18.0 kDa For protein (fermented protein, FP) in kidney beans heated and fermented with B. subtilis ATCC 51189. Hemagglutinating activities of RP, HP and FP were 128 HU, 4 HU and 32 HU respectively. Both of RP and FP showed anticancer activity against stomach cancer cell line (SNU-1) at 50 $\mu\textrm{g}$g/mL and lymphocyte stimulating activity at 1 $\mu\textrm{g}$/mL, and stimulated PBMC to secrete IFN-${\gamma}$ and IL-12. However, HP did not show any kinds of activities. Taken together, these results suggested that lectin in kidney beans was destroyed by heating, hut new active lectin-like Protein was derived by fermentation with B. subtilis ATCC 51189.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.15 no.2
• /
• pp.158-164
• /
• 1986

Polyphenol oxidase in apple (Golden Delicious) was extracted, partially purified and its properties were found as follows; Polyphenol oxidase showed optimum pH for activity at 6.5 and optimum temperature at $30^{\circ}C$ and high affinity to o-diphenol compounds. Cysteine, ascorbic acid and sodium metabisulfite appeared to be most effective inhibitors. EDTA showed a slight inhibition. During the enzyme was kept in test tube at $4^{\circ}C\;and\;20^{\circ}C$ for a week, polyphenol oxidase activity decreased sharply during the first four days at $20^{\circ}C$, then decreased slowly as the storage was prolonged. At $4^{\circ}C$, the polyphenol oxidase activity appeared to be relatively stable during the first two days before activity began to decline sharply. Polyacrylamide disc gel electrophoresis indicated four bands with polyphenol oxidase activity. Three bands and one band of the active bands were observed after heating for 1hr at $60^{\circ}C\;and\;70^{\circ}C$ respectively. The enzyme activity was observed 40% after treatment at $60^{\circ}C$ and 5% after treatment at $70^{\circ}C$. Therefore, no difference in the thermal stability was observed between active bands and the enzyme activity.

• Korean Journal of Food Science and Technology
• /
• v.32 no.4
• /
• pp.959-963
• /
• 2000

Soy bean is one of the most common food material to cause food hypersensitivity reactions in Korea. In this study we have investigated the effect of heating on antigenicity and allergenicity change of soybeans by using immunoblotting and ELISA methods with serum of soybean allergic patients and polyclonal antibody against soybean proteins. Soybean proteins were extracted by one-hour heating in boiling waterbath and separated by SDS-PAGE. After heat treatment, no significant changes of soy protein patterns were observed in SDS-PAGE analysis. Furthermore, the heat treatment had no effect on the results in immunoblotting with polyclonal antibody as well as in ELISA with soybean allergic patients' serum. With these results it may be concluded that allergenicity and antigenicity of soybeans do not reduce by thermal treatment.

• Korean Journal of Materials Research
• /
• v.30 no.9
• /
• pp.489-494
• /
• 2020

SiC is a material with excellent strength, heat resistance, and corrosion resistance. It is generally used as a material for SiC invertors, semiconductor susceptors, edge rings, MOCVD susceptors, and mechanical bearings. Recently, SiC single crystals for LED are expected to be a new market application. In addition, SiC is also used as a heating element applied directly to electrical energy. Research in this study has focused on the manufacture of heating elements that can raise the temperature in a short time by irradiating SiC-I₂ with microwaves with polarization difference, instead of applying electric energy directly to increase the convenience and efficiency. In this experiment, Polydimethylsilane (PDMS) with 1,2 wt% of iodine is synthesized under high temperature and pressure using an autoclave. The synthesized Polycarbosilane (PCS) is heat treated in an argon gas atmosphere after curing process. The experimental results obtain resonance peaks using FT-IR and UV-Visible, and the crystal structure is measured by XRD. Also, the heat-generating characteristics are determined in the frequency band of 2.45 GHz after heat treatment in an air atmosphere furnace.

• Food Science of Animal Resources
• /
• v.34 no.6
• /
• pp.822-828
• /
• 2014

In this study, the existence of skeletal muscle troponin I (smTnI), well-known as a muscle protein in fat tissues, and the utilization of smTnI as a biomarker for the identification of fat adulteration were investigated. A commercial antibody (ab97427) specific to all of animals smTnI was used in this study. Fat and meat samples (cooked and non-cooked) of pork and beef, and chicken considered as representative meats were well minced and extracted by heating and non-heating methods, and the extracts from fat and meat tissues were probed by the antibody used in both enzyme-linked immunosorbent assay (ELISA) and immunoblot. The antibody exhibited a strong reaction to all meat and fat extracts in ELISA test. On the other hand, the results of immunoblot analsis revealed a 23 kDa high intensity band corresponding to the molecular weight of smTnI (23786 Da). These results demonstrate that the existence of smTnI in all animal fat tissues. Since there are monoclonal antibodies specific to each species smTnI, smTnI in fat tissues could be used as a biomarker to identify or determine animal species adulterated in meat products. Therefore, an analytical method to identify fraudulent fat adulteration can be developed with an antibody specific to each species smTnI.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.48-48
• /
• 2007

P-type transparent conducting $CuGaO_2$ thin films have been prepared by DC/RF sputtering using Quartz(0001) and sapphire(0001) substrates. The target was fabricated by heating a stoichiometric mixture of CuO and $Ga_2O_3$ at 1373K for 12h under $N_2$ atmosphere. The film were deposited under mixture gas of Ar and $O_2(Ar:O_2=4:1)$ during 10~30min. and the as-deposited films were annealed at 1123K and $N_2$ atmosphere. Room temperature conductivity and the activation energy of the sintered body in the temperature range of 223K ~ 423K were 0 004S/cm, 1.9eV, respectively. XRD revealed that all of the as-deposited films were amorphous. Heating of the films deposited on Quartz substrates above 1123K resulted in crystallization with a second phase of $CuSiO_3$, which was assumed owing to reaction with Quartz substrate. The single phase of $CuGaO_2$ was obtained at the film deposited on the sapphire substrates. The transmittance after annealing of DC- and RF-sputtered films were 55~75% at 550nm. From the transmittance and reflectance measurement. the direct band gap of the DC/RF-sputtered films were 3.63eV and 3.57eV. and there was little difference between DC and RF sputtered films.

• Journal of Korean Society for Quality Management
• /
• v.47 no.3
• /
• pp.437-451
• /
• 2019

Purpose: The purpose of this study is to improve the quality of the PGM system by improving the structure and production process of slip-ring rotary joint for radar. Methods: The improvement measures for each cause are established through failure analysis of broken items. Specifically, changing in the housing to improve the heating system. Changing the transportation method to prevent damage to equipment during transport. Changing work process of the attenuator ring to prevent damage. etc. Results: The results of this study are as follows; improving the heating system reduces heat generated by the attenuator by about 7 degrees and obtain additional temperature margins. Reduction of defect rate because of adding X-band rotary joint run-out measurement test, ESS of slip-ring rotary joint and Transportation improvement(reinforced flight boxes, tube protection, etc). Getting stable VSWR values by improving work process of attenuator overheating due to a bad bonding process. Conclusion: Through this study, improvements were made to slip-ring rotary joint that failed repeatedly for various reasons. As a result of the application of the improvements, the same fault does not occur until now, so we can see that the quality of PGM has improved.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.7 no.3
• /
• pp.359-365
• /
• 1997

$K_2CoCl_4$, single crystals were grown by the Czochralski method in Ar atmosphere. The thermal hysteresis of the dielectric constant at $T_c$ was investigated. $K_2CoCl_4$ crystal shows ionic hopping mechanism due to $K^+$ ion and the activation energy is nearly 0.62 eV. Thermal expansions along a-, b-, and c-axis of $K_2CoCl_4$, were measured on heating and the thermal expansion coefficients in each phase were calculated. From the result of the optical absorption measurement, we interpreted the absorption peak as transition energy between the splitted energy levels of the Co ion in the crystal field and it showed the possibility of the application to the optical band filter between 800 nm and 1200 nm.