• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.260-260
• /
• 2017

High temperature is one of major environmental stress. Heat in flowering season of wheat is able to effect negatively to fertilization and also heat effect to maturity. Therefore, Heat stress effects severely to qualities of wheat and yield productivity. In this study, we evaluated to agronomic characteristics and qualities by high temperature in 13 Korean wheat varieties. Weight of 1,000 grains decreased when wheat got the heat stress. In particular, heat stress during the heading dates were more damaged than after the end of heading dates except two varieties Keumkang and Jokyoung. Plant height of each cultivar under high temperature and normal field averaged 80.5 cm and 83.0cm, respectively. The length of spike and awn in each cultivar were similar to both condition. Flour yield and gluten contents of most heat damaged wheat decreased. Under the temperature, protein contents of six varieties like as Keumkang, Baekjoong, Hojoong, Yeonbaek, Joah and Shinmichal 1 decreased but the others increased. The sedimentation values (SDSF) of four varieties decreased under the high temperature. But SDSF of 7 varieties like as Baekjung, Suan, Hojoong, Jojoong, Uri, Shinmichal and Shinmichal 1 was increased. The lightness (L) of wheat flour derived from high temperature treated wheat was darker than non-treated wheat. As a result of this research, we confirmed that agricultural traits and qualities decreased in heat damaged wheat.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.32 no.6
• /
• pp.519-525
• /
• 2008

For this study, SM45C steel rods using generally for power transmission shafts and machine components was selected and welded by butt-GMAW method. And then it was studied about estimation of fatigue strength and the region of infinite life by Haigh diagram using Goodman's equation. Fatigue strength in weld zone presents highly in order of the boundary between deposited metal zone and heat affected zone, deposited metal zone, heat affected zone. This result agrees with distribution of hardness in weld zone. Fatigue strength in base metal zone presents highly compared with weld zone in low cycles between $10^4$ cycles and $10^6$cycles, but it presents the lowest fatigue strength on the order of heat affected zone in the vicinity of $10^6$cycles. It is the result that the first high compressive residual stress distributed by drawing process of the steel rods is released and the base metal is softened by alternating stresses. The region of infinite life by Haigh diagram presents highly in order of the boundary between deposited metal zone and heat affected zone, deposited metal zone, heat affected zone. From this results, it is demanded that the stress for safety design of machine components using SM45C butt-welded steel rods must be selected in the region of the lowest infinite life of heat affected zone.

• Entomological Research
• /
• v.48 no.5
• /
• pp.416-428
• /
• 2018

To gain an insight into the function of heat shock proteins (HSPs) in insects during thermal stress, three HSP cDNAs were identified in the transcriptome of adult Heortia vitessoides, one of the most destructive defoliating pests in Aquilaria sinensis (Loureiro) Sprenger forests. The open reading frames of HvHsp60, HvHsp70, and HvHsp90 were 1,719, 2,070, and 2,151 bp in length, respectively, and encoded proteins with molecular weights of 61.05, 75.02, and 82.23 kDa, respectively. Sequence analysis revealed that all three HSPs were highly conserved in structure. Regarding the stage-specific expression profiles, HvHsp60, HvHsp70, and HvHsp90 mRNAs were detected in all developmental stages. Regarding the tissue-specific expression profiles, the expression levels of the three HSP genes were different in various larval and adult tissues. Moreover, the expression patterns of heat-stressed larvae, pupae, and adults indicated that HvHsp60, HvHsp70, and HvHsp90 were heat-inducible. In particular, HvHsp60 transcripts increased dramatically in larvae and pupae that were heat-stressed at $40^{\circ}C$ and were upregulated in adults that were heat-stressed at $35^{\circ}C$ and $40^{\circ}C$. The expression of HvHsp70 significantly increased in all of the three different developmental stages at $35^{\circ}C$, $40^{\circ}C$, and $45^{\circ}C$. The expression of HvHsp90 obviously increased at $30^{\circ}C$, $35^{\circ}C$, and $40^{\circ}C$ in larvae and could be induced at $35^{\circ}C$ in pupae and adults. The results suggest that HSP60, HSP70, and HSP90 play a major role in protecting H. vitessoides against high-temperature stress.

• Proceedings of the KWS Conference
• /
• v.43
• /
• pp.58-60
• /
• 2004

In the field of welding the behavior of a welded structure under consideration may be predicted via heat transfer and residual stress analysis. In order to facilitate the industrial applications of welding, numerical modeling of heat transfer and residual stress in weldment has been carried out applying Finite Element Method (FEM) and the analysis with the external load including this residual stress due to welding has been done. The present work includes the specialized finite element codes for the calculation of nonlinear heat transfer details and residual stress redistributed along with the external load in the welded structures. A basic interface, which allows models, built in commercial preprocessing package access to the data necessary to build standard input decks for these specialized FEM codes, which are not supported by commercial package. The results from the FEM codes are imported back into commercial package for visualization. In addition the residual stress values are exported to commercial package (such as ANSYS, PATRAN etc.) for further analysis with the external loads, which make the FEM codes fully applicable to the industrial purpose.

• Journal of the Korean Society for Heat Treatment
• /
• v.24 no.3
• /
• pp.149-155
• /
• 2011

Residual stress relief by pulse magnetic treatment is attractive because the process is carried out at room temperature and magnetic fields that are easy to produce and control can be used. This study shows that strong pulse magnetic treatment can lead to stress relaxation of structural steels instead of a conventional heat treatment process. And it makes a comparative study about pulse magnetic treatment and tempering by using Larson-Miller equation. When the specimen was subjected to a pulse magnetic treatment process the residual stress in the specimen was reduced by about 13.8%. It could be compared with tempering at $200^{\circ}C$ for 2hours by using thermal effect of Larson-Miller equation. As a result, it is considered that the pulsed magnetic treatment have an effect of the stress relation by tempering at $200^{\circ}C$ for 2 hours.

• Nuclear Engineering and Technology
• /
• v.54 no.6
• /
• pp.2188-2197
• /
• 2022

To ensure the safety margin of a reactor pressure vessel (RPV) under normal operating conditions, it is regulated through the pressure-temperature (P-T) limit curve. The stress intensity factor (SIF) obtained by the internal pressure and thermal load should be obtained through crack analysis of the nozzle corner crack in advance to generate the P-T limit curve for the nozzle. In the ASME code Section XI, Appendix G, the SIF via the internal pressure for the nozzle corner crack is expressed as a function of the cooling or heating rate, and the wall thickness, however, the SIF via the thermal load is presented as a polynomial format based on the stress linearization analysis results. Inevitably, the SIF can only be obtained through finite element (FE) analysis. In this paper, simple prediction equations of the SIF via the thermal load under, cool-down and heat-up conditions are presented. For the Korean standard nuclear power plant, three geometric variables were set and 72 cases of RPV models were made, and then the heat transfer analysis and thermal stress analysis were performed sequentially. Based on the FE results, simple engineering solutions predicting the value of thermal SIF under cool-down and heat-up conditions are suggested.

• Journal of the korean Society of Automotive Engineers
• /
• v.12 no.3
• /
• pp.41-52
• /
• 1990

In this study are determined the unsteady temperature and thermal stress fields for a domestic 4-cylinder, 4-cycle gasoline engine cylinder head by the three-dimensional finite element method. A representative part of the cylinder head is modelled as a combination of hexahedron isoparametric elements, and the time-dependent temperature and the heat transfer coefficient of the gas are imposed as the thermal boundary conditions for the engine speeds of 500 rpm and 2000 rpm. The obtained results, which are represented graphically, indicate that the amplitudes of temperature fluctuation during a cycle are about 10.deg. C and 3.deg. C respectively on the surface of combustion chamber, and the maximum temperature fields occur at 30.deg. , 10.deg. respectively before the initiation of the exhaust stroke. Thermal stress fields due to non-uniform temperature distributions show that compressive stress is much larger than tensile stress throughout a cycle. It is also found that the compressive stress varies with substantial amplitude between the exhaust port and ignition plug hole, and the high tensile stress with small fluctuation occurs between exhaust port and the adjacent head bolt hole.

• Journal of the Korean Society for Heat Treatment
• /
• v.6 no.2
• /
• pp.70-78
• /
• 1993

The presence of a residual stress in a thin film affects the properties and performances of the film, so the study of stress in a film must be very important. In this study, therefore, considering the characteristics of PECVD process, it was discussed that the residual stress, measured by $sin^2{\Psi}$ method, fo TiN films deposited on substrates with different TECs (thermal expansion coefficients) changed with film thickness. As a results, it was obtained that the residual stress of TiN film was compressive stress about all kinds of substrates and increased with film thickness. Also, the compressive residual stresses of TiN films increased in Si, Ti, STS304 order. According to the above results, we confirmed that the changes of residual stress of TiN film with substrates were due to the thermal stress originated form the difference in the TECs of the film and substrates, and that the intrinsic stress had dominating effect on the residual stress of TiN film deposited by PECVD. And in this study, the intrinsic stress of TiN film was compressive stress in spite of the Zone 1 structure. It is due to the entrapment of impurities in grain boundary or void.

• Journal of Korean Society of Steel Construction
• /
• v.12 no.2 s.45
• /
• pp.197-207
• /
• 2000

A transient heat transfer analysis and thermo-elastic analysis have been performed for the residual stress distribution on the fillet weldment used by finite element method. Specimen is fabricated single-pass fillet welding. This computation was performed for conditions including surface heat flux and temperature dependent thermo-physical properties using by heat input as parameter. Also, cut-off temperature of residual stress estimation by thermo-elastic analysis is determined. The fillet weldment were measured to determined their residual stress distributions for using hole-drilling method. As result, it was found that large tensile residual stress is about material yield strength, and the numerical simulation results for finite element method similar to residual stresses by hole-drilling method and other exiting research. Also, cut-off temperature is effectively determined by temperature which calculated maximum thermal stress equal to material yield strength.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.11 no.2
• /
• pp.314-321
• /
• 1987

Post weld heat treatment (PWHT) of weldment of the low alloy Cr-Mo steel, in general, is carried out not only to remove residual stress and hydrogen existing in weldment but to improve fracture toughness of weld heat affected zone (HAZ). There occur some problems such as toughness decrement and stress relief cracking (SRC) in the coarse grained region of weld HAZ when PWHT is practiced. Especially, embrittlement of structure directly relates to the mode of fracture and is appeared as the difference of fracture surface such as grain boundary failure. Therefore, in this paper, the effect of heating rate on PWHT embrittlement under the various kinds of stresses simulated residual stress in weld HAZ was evaluated by COD fracture toughness test and observation of fracture surface. Fracture toughness of weld HAZ decreased with increment of heating rate under no stress, but it was improved to increment of heating rate under the stress. Grain boundary failure didn't almost appear at the heating rate of 600.deg.C/hr but it appeared from being the applied stress of 294 MPa at 220.deg.C/hr and 196 MPa at 60.deg.C/hr.