• 한국환경과학회지
• /
• 제24권6호
• /
• pp.819-826
• /
• 2015

This study measured temperatures and albedos of urban surfaces for different colors and materials during summer, and calculated the energy budget over different urban surfaces to find out the thermal performance affecting the heat built-up. The study selected six surface colors and 13 materials common in urban landscape. Their surface temperatures (Ts) and albedos were measured at a given time interval in the daytime from June to August. Average Ts over summer season for asphalt-colored brick was $4.0^{\circ}C$ higher than that for light red-colored one and $9.7^{\circ}C$ higher than that for white-colored one. The Ts for artificial surface materials of asphalt paving, brown brick wall, and green concrete wall was $6.0^{\circ}C$ higher than that for natural and semi-natural ones of grass, grassy block, and planted concrete wall. There was the greatest difference of $16.3^{\circ}C$ at midafternoon in the Ts between asphalt paving and planted concrete wall. Average albedo over summer season of surface materials ranged from 0.08 for asphalt paving to 0.67 for white concrete wall. This difference in the albedo was associated with a maximum of $15.7^{\circ}C$ difference at midafternoon in the Ts. Increasing the albedo by 0.1 (from 0.22 to 0.32) reduced the Ts by about $1.3^{\circ}C$. Average storage heat at midday by natural and semi-natural surfaces of grass and grassy block was about 10% lower than that by artificial ones of asphalt, light-red brick, and concrete. Reflected radiation, which ultimately contributes to heating the urban atmosphere, was 3.7 times greater for light-red brick and concrete surfaces than for asphalt surface. Thus, surfaces with in-between tone and color are more effective than dark- or white-colored ones, and natural or semi-natural surfaces are much greater than artificial ones in improving the urban thermal environment. This study provides new information on correlation between Ts and air temperature, relationship between albedo and Ts, and the energy budget.

• 한국약용작물학회지
• /
• 제25권2호
• /
• pp.89-94
• /
• 2017

Background: The purpose of improving the quality of oriental medicinal herbs is to contribute to the improvement of the income of farm. The present study investigated the effect of reasonable drying methods, different storage conditions and packageing materials on quality and stability of Scutellaria baicalensis Georgi and for developing GAP (good agricultural practice) guide book. Methods and Results: Three methods of drying Scutellaria baicalensis roots produced over two years were used to estimate loss rate owing to drying, storage, and packaging. The methods of drying were categorized into natural drying (36 - 60 h by sunshine), drying with heat dryer (2 - 10 h), or drying with gas bulk dryer (2 - 10 h). After cleaning, and initial drying for a few days under controlled temperature conditions, the second phase of drying was carried out at 35, 45 and $55^{\circ}C$. Changes in hunter color values and quality under the two studied storage treatments (at $20^{\circ}C$ indoors and at $4^{\circ}C$ in a refigerator) were evaluated. Storage period for 60, 120, and 180 days in three packaging materials, PE (polyethylene package), PP (polypropylene gunnysack), and WP (watertight packing paper) were studied. Conclusions: Initial cleaning, reasonable gas drying and hot air drying, and drying in an oven at 35 and $45^{\circ}C$ after cutting the roots resulted in the lowest loss rates in S. Baicalensis root. Hunter color valuse indicated that stroage of dry roots at room temperature was better than PP packaging, and that cold stroage was better than PE packaging for long-term stability.

• 에너지공학
• /
• 제23권3호
• /
• pp.82-87
• /
• 2014

적층 단열재(multi-layer insulation, MLI)는 초전도 마그넷과 초전도 전력 케이블과 같은 초전도 응용기기의 냉각에 사용되는 저온유지장치(cryostat)에 외부 열침입을 차단하여 단열성능을 향상시키기 위해 사용된다. 적층 단열재는 인공위성에 사용되는 단열재로 적층단열재를 구성하는 자재의 종류와 적층층수 등에 따라 단열 성능이 변화한다. 본 연구에서는 적층 단열재의 원리를 이용한 축열조용 복합 다층 단열재(composite multilayer insulation, CMI)의 구성 재질 종류를 변경하고 적층 방식을 바꿈으로서 단열 성능이 바뀌는 것을 확인하였다. 실험은 KS C 9805의 방법을 이용하였으며, 복합 다층 단열재의 단열 성능 확인을 위해 동일한 조건의 축열조에 스티로폼을 적용하여 비교하였다. 또한, 실험 결과를 분석하기 위한 방법으로 기존 단열재에 대한 등가 두께를 비교하고 type별 CMI의 열전도율을 구해 비교하였다. 그 결과 복합 다층 단열재의 등가 두께는 스티로폼 보다 작아 동일 두께인 경우 스티로폼 보다 단열성능이 더 우수함을 확인할 수 있었다. 또한, 복합 다층 단열재의 구성 소재 및 적층 방식에 따라 전도, 대류 및 복사와 관련된 값들의 변화가 총괄 열전달계수에 영향을 미치는 것을 확인할 수 있었다.

• Journal of Biosystems Engineering
• /
• 제17권1호
• /
• pp.79-90
• /
• 1992

Viscoelastic characteristics of agricultural products may be determined through three basic tests ; stress relaxation, creep, and dynamic test. Considering the changeability of living materials, dynamic test in which information is derived in a relatively short time appears to be highly desirable, in which either cyclic stress or cyclic strain is imposed and the remaining quantity (strain or stress) is measured. The periodically varying stress will also result in periodically varying strain which in a viscoelastic material should theoretically be out of phase with the stress, because part of the energy subjected to sample is stored in the material as potential energy and part is dissipated as heat. This behavior results in a complex frequency-dependent compliance denoted by J($i{\omega}$). The complex compliance and therefore the storage compliance, the loss compliance, the phase angle, and percent energy loss for the sample should be obtainable with a given static viscoelastic property of the material under static load. The complex compliance of the rough rice kernel were computed from the Burger's model describing creep behavior of the material which were obtained in the previous study. Also, the effects of cyclic load and moisture content of grain on the dynamic viscoelastic behavior of the samples were analyized. The results obtained from this study were summarized as follows ; 1. The storage compliance of the rough rice kernel slightly decreased with the frequency applied but at above the frequency of 0.1 Hz it was nearly constant with the frequency, and the loss compliance of the sample very rapidly decreased with increase in the frequency on those frequency ranges. 2. It was shown that the storage compliance and the loss compliance of the sample increased with increase in grain moisture content. Effect of grain moisture content on the storage compliance of the sample was highly significant than effect of the frequency applied, but effect of the frequency on the loss compliance of the sample was more significant than effect of grain moisture content. 3. In low moisture content, the percent energy loss of Japonica-type rough rice was much higher than that of Indica-type rough rice, but, in high moisture content, vice versa.

• 산업진흥연구
• /
• 제9권2호
• /
• pp.37-44
• /
• 2024

본 연구는 석유 화학사 생산공장에 설치된 스티렌 모노머 저장 탱크의 화구(fireball)와 증기운 폭발(VCE)에 대한 최악의 시나리오를 선정하고 피해 예측 및 사고영향을 분석하였다. 혼합잔사유 저장 탱크의 주성분인 스티렌 모노머 이상중합반응 시 화구(fireball)와 증기운 폭발(VCE)로 인한 복사열과 과압의 영향 범위는 e-CA 사고 피해 예측 프로그램을 적용하여 정량 분석하였다. 복사열과 폭발 과압의 피해 영향 범위는 각 최대 반경 1,150m와 626m로 분석된다. 복사열 4kW/m²이 미치는 1,150m 이내 사람은 20초 동안 노출 시 피부가 부풀어 오를 수 있다. 폭발 과압 21kPa이 미치는 626m 이내 건축물은 철 구조물의 손상과 기초에서 이탈될 수 있고, 사람은 신체 부상할 수 있다. 화재, 폭발 또는 누출 사고 발생 시 복사열, 과압에 의한 사업장 내 근로자, 인근 주민 또는 주변 시설물 등의 위험 정도와 수용 여부 위험 기준을 판단하고, 취급 물질 유해·위험성 파악, 비상대응체계 구축, 개선 및 투자 활동 등을 통해 사업장 피해 최소화 대책을 수립하는 데 도움이 될 것으로 기대한다.

• 한국토양비료학회지
• /
• 제23권2호
• /
• pp.146-151
• /
• 1990

Rhizobium균을 이용하여 근류균 접종제를 생산하기 위한 기초연구로 우수한 증량제(carrier material)를 선발하고, 근류균의 접종량, carrier의 숙성 및 보존온도, 멸균조건등 근류균 접종제 생산을 위한 각종 조건을 확립하기 위하여 실험한 결과는 다음과 같다. 1. 근류균 접종제 생산을 위한 carrier material source로는 퍼라이트 및 토탄이 우수한 것으로 나타났다. 2. 근류균의 접종량(inoculum size)에 따른 경시적 생존율은 접종초기 $10^4cells/g$ 이하의 균주를 접종하여도 1~2주후에는 $5{\times}10^8cells/g$로 증가하여 $10^8cells/g$ 접종구와 비슷한 균수를 나타내었다. 3. Carrier의 숙성 및 보존온도에 따른 근류균의 경시적 생존율은 특별한 보온이나 냉장시설없이 실온($20^{\circ}C$) 보존에서도 $10^9cells/g$의 높은 균수가 12주째까지 유지되었다. 4. Carrier의 멸균방법에 따른 근류균의 경시적 생존율은 가압습열멸균 처리구에서 생존율이 가장 양호하였으나 각 처리에 따른 큰 차이는 볼 수 없었고, 특히 퍼라이트의 경우에는 멸균처리없이도 12주째 까지 $10^9cells/g$ 이상의 높은 균수를 유지하였다.

• 한국태양에너지학회 논문집
• /
• 제24권2호
• /
• pp.63-71
• /
• 2004

Energy and environmental concerns accelerate the interest in passive solar heating in buildings, which utilizes solar energy through natural heat transfer. Moreover concerns about environmentally friendly materials were also increased. This study aims to evaluate the thermal performance of a Trombe wall built with earth. The thermal performance of the Trombe walls was analysed with results from computer simulations with TRNSYS 15. The thermal performance of the three types of Trombe wall was compared.: concrete. rammed earth. adobe. It was found that Trombe wall with the thermal storage wall of earth performed better than that of concrete. Rammed earth and adobe Trombe walls gained 4.7% and 12.8% more solar energy. respectively. than the concrete Trombe wall. In earth-applied Trombe walls. the energy gain by natural convection released from the airspace was about 75% of the total solar gains. that took 15% more than concrete Trombe wall. Rammed earth and adobe Trombe walls seem to be more suitable for buildings that use mostly in daytime. such as school, office and so on.

• 태양에너지
• /
• 제11권1호
• /
• pp.16-26
• /
• 1991

주거용 온수급탕에 소비되는 에너지를 절약하기 위하여 국내기후와 생활환경에 적합한 자연대류형 태양열 온수 급탕 시스템의 개발에 관한 연구이다. 비교분석을 위해 집열기와 열교환 형태에 따른 여러형태의 축열조를 제작하여 실험을 수행하였다. 또한, 열성능 분석결과를 토대로 시스템 최적화를 통한 모범도면을 작성하였고, 지역별, 기후별 실증실험을 위하여 전국7개도시(서올, 부산, 대구, 광주, 대전, 강릉, 제주)에 시범 설치하여 열성능 및 실용화 가능성을 검토하였다.

• 동아시아식생활학회지
• /
• 제24권5호
• /
• pp.680-690
• /
• 2014

This study investigated the performance of hygiene management according to the capacity and food cost of foodservice in kindergartens as a measure of kindergartens foodservice hygiene management. Dietitians from the education office visited 50 kindergartens under the control of Dongbu District Office of Education during January, 2011. Kindergartens were 11 public and 39 private institutions. Over half of kindergartens (n=27) provided foodservice to 50~99 children. About 21 kindergartens had a foodservice cost per student per day of 2,000 won. Regarding personal hygiene, 'whether to wear an accessory or have a manicure' showed the best performance. 'Whether to have their health examined once every 6 months or keep their health records in 2 years' was rarely performed. For food materials, 'whether to buy food appropriate for the quality control standard of food materials' showed the highest performance. The highest performances for storage management of food materials and handling of food was 'whether to store goods within butlery at intervals more than 30 cm from the ground' and 'whether to heat and cook food more than $74^{\circ}C$', respectively. The highest performance for distribution of food and management of facilities was 'the hygienic management of cooking tools and facilities' and 'the proper installation of air-conditioning, heating and ventilation facilities', respectively. The results of this study show that capacity and food cost had the strongest effects on performance of personal hygiene. Especially, smaller facility size could increase performance of foodservice management.

• 한국재료학회지
• /
• 제30권11호
• /
• pp.636-640
• /
• 2020

Due to the serious air pollution problem, interest in eco-friendly vehicles is increasing. Solving the problem of pollution will necessitate the securing of high energy storage technology for batteries, the driving force of eco-friendly vehicles. The reason for the continuing interest in the transition metal oxide LiMO₂ as a cathode material with a layered structure is that lithium ions reveal high mobility in two-dimensional space. Therefore, it is important to investigate the effective intercalation and deintercalation pathways of Li⁺, which affect battery capacity, to understand the internal structure of the cathode particle and its effect on the electrochemical performance. In this study, for the cathode material, high nickel Ni_0.8Co_0.1Mn_0.1(OH)₂ precursor is synthesized by controlling the ammonia concentration. Thereafter, the shape of the primary particles of the precursor is investigated through SEM analysis; X-ray diffraction analysis is also performed. The electrochemical properties of LiNi_0.8Co_0.1Mn_0.1O₂ are evaluated after heat treatment.