• Elastomers and Composites
• /
• v.54 no.3
• /
• pp.241-246
• /
• 2019

Carbon master batch (CMB) rubber sheets, which are stored in stacks, are difficult to separate during reuse because of the adhesion between sheets caused by the stacked weight over time. To solve this problem, in the actual rubber product manufacturing process, various anti-tacking agents (solid powder or liquid surfactants) are applied to the sheet surface. In this study, the emulsion samples of zinc (Zn)-stearate/triethanolamine (TEA)-stearate mixtures were prepared using TEA-stearate as a surfactant, prepared using an industrially manufactured Zn-stearate powder, and their basic anti-tacking properties were studied. During the process of manufacturing emulsion, a heat treatment process and an auxiliary surfactant were introduced to improve the dispersion stability. Results showed that the heat-treated sample exhibited a significant improvement in terms of sedimentation, storage stability, and anti-tacking characteristics since the Zn-stearate particles were reduced to a smaller size by the heat-treatment than that of the original Zn-stearate powder.

• Journal of Korean Society for Atmospheric Environment
• /
• v.13 no.2
• /
• pp.103-113
• /
• 1997

The research described in this paper was conducted to estimate the stability and heat budget in planetary boundary layer (PBL) at Kimhae. The upper air observation was carried out during period from 3 Februsry 1993 to 5 February 1993 at Kimhae. The surface observation data used the one during period from 1 April 1994 to 31 March 1995. The maximum height of inversion layer observed at Kimhae was 310 m. Destruction of the inversion was simultaneously occurred at the surface and the mid-layer (200 $\sim$ 300 m), however the origin of destruction is different each other. The surface inversion is destructed by surface heating owing to growing radiation in surface but disappearance of the mid-layer inversion is related to the upper cold air movement.

• Korean journal of food and cookery science
• /
• v.12 no.1
• /
• pp.54-59
• /
• 1996

Immunoglobulins (IgY) were isolated from egg yolk of hens immunized with bovine serum albumin(BSA). The stability of anti-BSA IgY against heat and pH was investigated. Antibody activity was measured by enzyme linked immunosorbent assay. IgY was relatively heat-stable and most of the antibody activity remained after heating up 65$^{\circ}C$ for 30 minutes. IgY was stable at pH 5-11. However, inactivation of IgY was observed below pH 4, or above pH 12. Inactivation of IgY proceeded rapidly at low pHs(pH 2-3). Most of the antigen binding activity was lost at low pHs probably because of some conformational changes.

• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.43-48
• /
• 2003

In this study the optimization of plate-fin type heat sink for the thermal stability is performed numerically. The optimum design variables are obtained when the temperature rise and the pressure drop are minimized simultaneously. The flow and thermal fields are predicted using the finite volume method and the optimization is carried out by using the sequential quadratic programming (SQP) method which is widely used in the constrained nonlinear optimization problem. The results show that when the temperature rise is less than 34.6 K, the optimal design variables are as follows; $B_{1}$ = 2.468 mm, $B_{2}$ = 1.365 mm, and t = 10.962 mm. The Pareto optimal solutions are also presented for the pressure drop and the temperature rise.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.21 no.9
• /
• pp.789-794
• /
• 2008

Zinc oxide (ZnO) has been widely studied for its practical applications such as transparent conduction electrodes for flat panel displays and solar cells. Especially, ZnO films show good chemical stability against hydrogen plasma, absence of toxicity, abundance in nature, and then suitable for photovoltaic applications. However, the fabrication process of thin film solar cells require a high substrate temperature and/or post heat treatment. Therefore, the layers have to withstand high temperatures, requiring an excellent stability without degrading their electronic and optical properties. In this paper, we investigated the stability of zinc oxide (ZnO) films doped with aluminum and hydrogen. Doped ZnO films were prepared by r.f. magnetron sputter and followed by heat treatment at different temperatures and for various times.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.18 no.2
• /
• pp.93-99
• /
• 2002

This study was performed to investigate the color stability of IPS Empress 2 glass-ceramic after heat-pressing and/or heat-treatments. Three types of IPS Empress 2 ingots (shade 100, 300, 500) were tested. For this study, three groups were prepared as follows: group 1 is as-received material, group 2 is heat-pressed material, and group 3 is fully heat -treated material. The color of the specimens was measured with a colorimeter. The data were statistically evaluated with one-way ANOVA and Scheffe's multiple test. The results obtained were as follows: 1. IPS Empress 2 glass-ceramic demonstrated less color stability according as the shade is lighter. Namely, the shade 500 showed the lowest color shifts and the shade 100 showed the greatest color shifts after heat-pressing and heat-treatments. 2. In the cases of shade 100 and 300, the changes of ${\Delta}E^*$ were affected mostly by the changes of $L^*$ and $b^*$. 3. In ${\Delta}E^*$ of the shade 100, there were significant differences among the group 1, 2, and 3 (P<0.001). 4. In ${\Delta}E^*$ of the shade 300, there were significant differences between the group 1 and 2, and the group 1 and 3 (P<0.001). 5. In ${\Delta}E^*$ of the shade 500, there was significant difference only between the group 1 and 3 (P<0.001).

• Journal of Dental Rehabilitation and Applied Science
• /
• v.16 no.1
• /
• pp.1-11
• /
• 2000

Dental temporary resin should have adequate strength and similar esthetics as natural teeth. Recently esthetics has become a high priority in clinical dentistry. Thus the evaluation of color stability of dental temporary resin has become an important part in dental research. The purpose of this study was to evaluate the difference in color stability of 3 resins($Snap^{(R)}$, Temporary bridge $resin^{(R)}$, Trim $II^{(R)}$) according to polymerizing methods and stainning. The resins were divided into groups by 2 types of polymerizing methods ( air or pressure and heat curing) The resins were dyed with coffee, chlorhexidine and artificial saliva and then the color stability was evaluated with a spectrophotometer(CM-503i, Minolta, Japan). The results were as follows ; 1. In the color stability according to polymerizing method, pressure and heat polymerizing method was higher than air polymerizing method. 2. The color stability according to staining fluid decreased in the order of I, II, III group, there was significant difference among the groups of staining fluid. 3. The color stability according to resins decreased in the order of $Snap^{(R)}$, Trim $II^{(R)}$, Temporary Bridge $resin^{(R)}$, The $Snap^{(R)}$ resin was highest color stability, there was significant difference among the 3 resins.

• Korean Journal of Poultry Science
• /
• v.16 no.1
• /
• pp.23-28
• /
• 1989

This study was undertaken to find out the effect of eeg albumen concentration and addition of sugars on the functional properties of egg albumen before and after heat treatment at $60^{\circ}C$ for 5 minutes. The turbidity was decreased until 8.3% protein concentration but increased as diluted and decreased again below 3.32% protein concentration before and after the heat treatment. The foaming power was peak at 8.3% protein concentration but decreased as diluted before and after the heat treatment. The foam stability was decreased as diluted before and after the heat treatment. The turbidity was not changed by addition of sucrose before the heat treatment and decreased after the heat treatment. The foaming power was decreased by addition of over 5% sucrose before the heat treatment and decreased by addition of over 2.5% sucrose after the heat treatment . The foam stability was increased by addition of over 5% sucrose before the heat treatment and increased by addition of sucrose after the heat treatment. The turbidity was increased by addition of glucose before the heat treatment and not changed after the heat treatment. The foaming power was decreased by the addition of glucose before the heat treatment and decreased by the addition of over 5% glucose after the heat treatment. The foam stability was decreased by the addition of glucose before and after the heat treatment.

• Korean journal of applied entomology
• /
• v.48 no.1
• /
• pp.109-115
• /
• 2009

The thermal stability and mechanical properties of Nephila clavata and Bassaniana decorata spider silks were measured and compared with those of aramid and polyester fibers. The thermal stability of the spider silk was lower than those of the commercial aramid and polyester fibers. However, the mechanical properties of the spider silk were far superior to that of the polyester fiber. The effect of the water content of the spider silk on its thermal stability and mechanical property was examined by conducting the silk to heat treatment at $100^{\circ}C$ under vacuum for various times. The results indicated that spider silk subjected to heat treatment for 1.5 hr had excellent thermal stability and mechanical property.

• Nuclear Engineering and Technology
• /
• v.27 no.3
• /
• pp.358-373
• /
• 1995

The Heat Transport system loop stability of CANDU-6 reactor using the CANFLEX fuel bundle was studied. The Thermal-hydraulic behavior of CANFLEX fuel bundle is similar to the conventional 37-element fuel bundle since the reactor power and the frictional pressure drop through the fuel channel is almost the same each other, Mounter the CANFLEX fuel bundle gives higher critical channel power and more homogeneous enthalpy distributions in the subchannels than 37-element fuel bundle. The SOPHT modelling or the CANFLEX fuel bundle and the Reactor outlet Header(ROH) interconnection line was made and the stability analysis response of Wolsong-1 reactor with CANFLEX fuel bundle was obtained. Without the ROH interconnection line the Heat Transport system loop using 43-element fuel bundle is unstable like the current 37-element fuel bundle. With the ROH interconnection line, however, the Heat Transport system is stable within $\pm$1％ of nominal flow. In the Heat Transport system loop stability point of view for Wolsong-1 plant therefore, the CANFLEX fuel loading is considered to be acceptable.