• 한국정밀공학회지
• /
• 제30권3호
• /
• pp.254-259
• /
• 2013

Ball screw system is widely used as a precision mechanical linear actuator that translates rotational motion to linear motion for its high efficiency, great stiffness and long life. Recently, according to the requirements of high accuracy and stiffness, the pre-load on the ball screw which means of remove the backlash in the ball screw is usually used. Because of the preload which means the frictional resistance between the screw and nut, becomes a dominating heat source and it generates thermal deformation of ball screw which is the reason for low accuracy of the positioning decision. There are several methods to solve the problem that includes temperature control, thermal stable design and error compensation. In the past years, researchers focused on the error compensation technique for its ability to correct ball screw error effectively rather than the capabilities of careful machine design and manufacturing. Significant amounts of researches have been done to real-time error compensation. But in this paper, we developed a series of cooling methods to get thermal equilibrium in the ball screw system. So we find the optimum cooling type for improving positioning error which caused by thermal deformation in the ball screw system.

• 항공우주기술
• /
• 제12권2호
• /
• pp.57-63
• /
• 2013

정지궤도에서 운용되는 많은 위성들이 통신방송을 목적으로 하고 있기 때문에 전력 요구량이 크고 이에 따라 대용량의 태양전지판이 필요하다. 최근에는 정지궤도에 통신방송 이외에 기상을 비롯한 지구환경 관측을 목적으로 하는 위성들이 개발되는 추세이다. 이러한 관측 위성의 탑재체는 감지기의 열환경 조건이 매우 중요하기 때문에 열원으로 작용되는 태양전지판을 제거하고 대신에 자세 안정도를 확보하기 위해 붐을 사용한다. 다른 방법으로 모멘텀 용량이 큰 휠을 장착하여 비대칭 태양전지판 형상으로 인해 태양에 의한 외란을 휠이 흡수하는 자세제어 방식을 사용하고 있다. 본 논문에서는 완벽한 비대칭 태양전지판 형상의 천리안위성에서 사용하고 있는 휠배치와 그에 적합한 휠모멘텀조정에 관하여 분석하고 현재 운용되고 있는 텔레메트리를 통해 그 결과를 검증하였다.

• KIEAE Journal
• /
• 제15권5호
• /
• pp.13-20
• /
• 2015

Purpose: In order to upgrade the energy performance of existing building, energy audit stage should be implemented first because it is useful method to find where the problems occur and know how much time and cost consumption for retrofit. In overseas researches, three levels of audit is proposed whereas there are no standards for audit in Korea. Besides, most studies use dynamic simulation in detail like audit level 3 even though the level 2 can save time and cost than level 3. Thus, this paper focused on audit level 2 and proposed the audit method with the simple linear regression analysis model. Method: Two parameters were considered for the simple regression analysis, which were the monthly electric use and the mean outdoor temperature data. The former is a dependent variable and the latter is a independent variable, and the building's energy performance profile was estimated from the regression analysis method. In this analysis, we found the abnormal point in cooling season and the more detailed analysis were conducted about the three heat source equipments. Result: Comparing with real and predicted models, the total consumption of predicted model was higher than real value as 23,608 kWh but it was the results that was reflected the compulsory control in 2013. Consequently, it was analyzed that the revised model could save the cooling energy as well as reduce peak electric use than before.

• Nuclear Engineering and Technology
• /
• 제47권1호
• /
• pp.11-25
• /
• 2015

The accident at Japan's Fukushima Daiichi nuclear power plant in March 2011, caused by an earthquake and a subsequent tsunami, resulted in a failure of the power systems that are needed to cool the reactors at the plant. The accident progression in the absence of heat removal systems caused Units 1-3 to undergo fuel melting. Containment pressurization and hydrogen explosions ultimately resulted in the escape of radioactivity from reactor containments into the atmosphere and ocean. Problems in containment venting operation, leakage from primary containment boundary to the reactor building, improper functioning of standby gas treatment system (SGTS), unmitigated hydrogen accumulation in the reactor building were identified as some of the reasons those added-up in the severity of the accident. The Fukushima accident not only initiated worldwide demand for installation of adequate control and mitigation measures to minimize the potential source term to the environment but also advocated assessment of the existing mitigation systems performance behavior under a wide range of postulated accident scenarios. The uncertainty in estimating the released fraction of the radionuclides due to the Fukushima accident also underlined the need for comprehensive understanding of fission product behavior as a function of the thermal hydraulic conditions and the type of gaseous, aqueous, and solid materials available for interaction, e.g., gas components, decontamination paint, aerosols, and water pools. In the light of the Fukushima accident, additional experimental needs identified for hydrogen and fission product issues need to be investigated in an integrated and optimized way. Additionally, as more and more passive safety systems, such as passive autocatalytic recombiners and filtered containment venting systems are being retrofitted in current reactors and also planned for future reactors, identified hydrogen and fission product issues will need to be coupled with the operation of passive safety systems in phenomena oriented and coupled effects experiments. In the present paper, potential hydrogen and fission product issues raised by the Fukushima accident are discussed. The discussion focuses on hydrogen and fission product behavior inside nuclear power plant containments under severe accident conditions. The relevant experimental investigations conducted in the technical scale containment THAI (thermal hydraulics, hydrogen, aerosols, and iodine) test facility (9.2 m high, 3.2 m in diameter, and $60m^3$ volume) are discussed in the light of the Fukushima accident.

• 한국전자통신학회논문지
• /
• 제12권6호
• /
• pp.1219-1226
• /
• 2017

본 논문에서는 다용도로 사용 가능한 UV LED 바의 최적설계를 하였다. UV LED는 자외선을 방출하기 때문에 사용목적상 일정하게 자외선을 방출하는 것이 중요하다. 일정한 자외선이 방출되기 위해서는 동작 가능 입력 전압 범위 내에서 정전류원으로 구동되어야 하고 자외선 활용 특성 상 자외선 방출 유지 시간이 길기 때문에 방열이 특히 중요하다. 따라서 소비전력이 최소화 되도록 설계해야 한다. 또한 인체 보호가 필수적이기 때문에 거리 감지 센서와 블루투스를 이용해 인체 감지 여부에 따라 동작할 수 있게 알고리즘을 구성하였다. 자외선 UVA를 방출하기 위해 365nm UV LED 3개가 직렬로 사용되었으며 입력 전압 12V와 정전류 500mA에서 동작하며 효율은 87.5%, 소비전력은 6.006W이다. 그리고 자외선 조사량은 루트론 계측기로 측정하였을 경우 10cm 거리에서 $5.35mW/cm^2$으로 측정 되었다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2005년도 전력전자학술대회 논문집
• /
• pp.774-777
• /
• 2005

In this paper, a constant frequency phase shifting PWM controlled voltage source full bridge-type series load resonant high-frequency inverter using the IGBT power modules is presented for innovative consumer electromagnetic induction heating applications such as a hot water producer, steamer and super heated steamer. The full bridge arm side link passive quasi-resonant capacitor snubbers in parallel with the each power semiconductor device and high frequency AC load side linked active edge inductive snubber-assisted series load resonant tank soft switching inverter with a constant frequency phase shifted PWM control scheme is discussed and evaluated on the basis of the simulation and experimental results. It is proved from a practical point of view that the series load resonant and edge resonant hybrid high-frequency soft switching PWM inverter topology, what is called class DE type. including the variable-power variable-frequency(VPVF) regulation function can expand zero voltage soft switching commutation range even under low output power setting ranges, which is more suitable and acceptable for induction heated dual packs fluid heater developed newly for consumer power utilizations. Furthermore, even in the lower output power regulation mode of this high-frequency load resonant tank high frequency inverter circuit it is verified that this inverter can achieve ZVS with the aid of the single auxiliary inductor snubber.

• Safety and Health at Work
• /
• 제13권2호
• /
• pp.227-234
• /
• 2022

Background and Purpose: In 2021, lung cancer in school food workers was first recognized as an occupational cancer. The classification of the carcinogenicity of cooking fumes by International Agency for Research on Cancer (IARC) was based on Chinese epidemiological data. This study aimed to determine the hazard levels of school cooking fumes in Korea. Materials and Methods: Based on public school cafeterias in one area, 25 locations were selected for the survey according to the number per school type, ventilation states, and environmental pre-assessments of cafeterias. Two inside cooking areas using a heat source and one outside cooking area were selected as control measurement points. Measurements of CO, CO₂, polycyclic aromatic hydrocarbons (PAHs), and total volatile organic compounds (TVOCs), including benzene, formaldehyde, and particulate matter (PM10, PM2.5, PM1, respectively), were taken. The concentrations and patterns of each substance in the kitchens were compared with the outdoor air quality. Result: Known carcinogens, such as the concentrations of PAHs, formaldehyde, TVOC (benzene), and particulate matter in school cooking fumes, were all detected at similar or slightly higher levels than those found outside. Additionally, substances were detected at relatively low concentrations compared to the Chinese cooking fumes reported in the literature. However, the short-term exposure to high concentrations of CO (or composite exposure with CO₂) and PM2.5 in this study were shown. Conclusion: The school cooking fumes in South Korea was a relatively less harmful than Chinese cooking fumes, however short-term, high exposure of toxic substances can cause a critical health effect.

• 한국건설관리학회논문집
• /
• 제23권1호
• /
• pp.73-82
• /
• 2022

국내 지정폐기물 중 하나인 폐페인트는 현재 전량 소각 방법으로 처리되고 있으며, 다른 폐기물에 비해 재활용도 거의 이루어지지 않고 있어, 자원이 부족한 우리나라에 엄청난 자원의 손실뿐 아니라 소각으로 인한 에너지원의 낭비, 그리고 소각 시 발생하는 대기오염 등의 환경문제도 유발하고 있다. 이를 위해 본 연구에서는 기존의 폐페인트의 소각처리법을 탈피하여, 온도 조절에 의한 증발·응축, 열분해를 통해 전처리 조작하는 방법으로 전환하고, 이때 발생하는 잔재물을 활용하여 일정한 형상(과립형 및 분말형)으로 성형한 후 이를 대체에너지 열원으로 재활용할 수 있는 친환경(지속가능한) 폐페인트 처리프로세스를 제시하고자 한다. 폐페인트를 처리하는 새로운 방법과 재활용하는 기술개발이 이루어지고 보급된다면 환경적·경제적 면에서 그 효과가 클 것으로 기대한다.

• 농업과학연구
• /
• 제40권4호
• /
• pp.333-338
• /
• 2013

Sources of energy and rumen undegradable protein (RUP) have been used to meet nutrient requirements for high producing dairy cows. However studies for manipulation the levels of energy and RUP in diets have been mainly achieved using dairy cows at early-lactation period. The objective of this study thus, was to investigate the effects of different energy and rumen undegradable protein (RUP) levels on dry matter intake and milk yield in Holstein cows at mid-lactation period. Basal diet was prepared as TMR to meet nutrient requirements for dairy cows at mid-lactation according to NRC recommendation. Cows of control group (Con) were fed only basal diets while ground corn (0.5 kg/d), heat-treated soybean meal (0.5 kg/d), and their mixture (0.25 kg of each supplements/d) were added to diets for cows of treatment groups (T1, T2, and T3 respectively) to modulate the level of energy and RUP contents in diets. Addition of energy or RUP source in basal TMR did not affect in total DMI while TMR intake tended to be higher in Con compared to T3. Cows fed T3 diets tended to show increased milk yield and MUN content than those of Con. Cows for T2 as well as T3 had lower ADG (P<0.05) compared with those of Con. We concluded that the addition of RUP source in diets for dairy cows on mid-lactation period might cause the decrement of DMI and ADG.

• 한국광학회지
• /
• 제32권2호
• /
• pp.49-54
• /
• 2021

본 논문에서는 고출력 광섬유 레이저의 핵심 부품인 대구경 광섬유 엔드캡을 제작하는 장비를 설계 및 제작하였으며, 제작장비를 이용하여 대구경 광섬유 엔드캡을 제작하였다. 대구경 광섬유 엔드캡 제작장비는 레이저 광을 조사하여 접속 열원으로 사용하기 위한 CO2 레이저 광원부, 대구경 광섬유와 엔드캡의 위치를 이송하기 위한 정밀 스테이지 조립체, 스테이지 조립체와 연동되어 융착 시 정렬에 사용되는 비전 시스템으로 구성되어 있다. 레이저 광원의 출력은 스테이지 조립체와 연동되어 출력을 제어하며, 비전 시스템으로 대구경 편광유지 광섬유의 편광축을 정렬할 수 있도록 제작되었다. 자체 제작한 장비를 이용하여 클래드 직경이 400 ㎛인 대구경 편광유지 광섬유와 10(W)×5(D)×2(H) ㎣의 엔드캡을 레이저 융착하여 대구경 광섬유 엔드캡을 제작하였다. 제작된 대구경 광섬유 엔드캡의 신호광 삽입손실, 소광률 및 빔품질(M2)은 각각 0.6%, 16.7 dB, M2x=1.21, M2y=1.22로 측정되었다.