• 대한한의학원전학회지
• /
• 제32권4호
• /
• pp.1-15
• /
• 2019

Objectives : To broaden understanding of "Shanghanlun", this paper analyzes and interprets its Post-formula instructions(方後注文). Methods : From the contents of Post-formula instructions that follow formulas in "Shanghanlun", the effects, administration instructions, decocting methods are examined specifically. Based on annotators's interpretations, the author provides his understanding. Conclusions & Results : The treatment principle of sweat inducive formulas is 'to induce subtle sweating(微似汗)'. Meanwhile, in the case of Inner water and fluid retention(水飮內停), 'sweating(汗出)' is expressive of healing. Among the emetic formulas in the "Shanghanlun", the meaning of 'vomiting(得吐者)' in the descriptions of Zhizichitang(梔子豉湯), is that the stagnated heat in the chest area has been relieved, letting the Qi communicate upwards. In terms of formula administration, besides the usual 2~3 times a day method, there is '頓服法' for immediate effects; three times within six hours application method in cases where the exterior symptoms are extremely severe or the stagnation of exterior pathogen is severe; 6 times a day or continuous application day and night regardless of frequency. In terms of decocting methods, there is '再煎法' to have the formula's effects not be biased or too strong; the decocting method of Dahuanghuanglianxiexīntang where the formula is brewed momentarily in order to cool the immaterial pathogenic heat. Moreover, when there is disease in the chest, Dahuang is brewed first to soften its effects. When there is disease in the abdomen area, Dahuang is added later to quicken its effects. In the case of Guizhirenshentang, to maximize the effect of Guizhi, it was suggested that Guizhi is added later.

• KSBB Journal
• /
• 제15권5호
• /
• pp.438-443
• /
• 2000

맥주의 숙성기간을 단축시키기 위해 네 종류의 고정화용 담체를 활용한 고정화 효모 반응기를 시험하였다. 전발효가 끝난 Green Beer (GB)를 효모를 제거하고 열처리할 경우 처 리온도가 높을수록 전구체인 $\alpha$-acetolactate의 diacety 1로의 전 환율이 낮고 전환속도도 빨라 $70^{\circ}C$이상의 온도에서는 4분이면 충분하였다 GB 중의 산소농도는 전구체에서 DA로의 변환율에 매우 큰 영향을 끼쳤는데 그 농도가 낮을수록 전환율이 낮았으며 0.1 ppm 이하의 농도에서는 거의 대부분의 전 구체가 DA이외의 물칠로 전환되었다. 열처리한 전발효 맥주 를 HAN, G-2, FLO, GDC 담체 column에 $\alpha$, 체류시간 80-150분으로 통과시킬 경우 diacety I 농도를 상품 맥주의 품질로 적합한 0.1 ppm이하로 떨어뜨릴 수 있어서 시험한 담체 모두 맥주 숙성용 효모고정화용 답체로의 실용화 가능 성이 있었다. 이 때 세라믹 담체 column의 경우 GDC 담체 column에 비해 미발효된 잔당의 발효에 의한 새로운 DA 전 구체의 생성이 많았다. 위와 같은 방법으로 생산한 맥주를 공장에서 기존의 방법으로 생산한 맥주와 맛을 비교한 결과 미세한 차이가 있으나 불쾌한 느낌을 주는 이취등은 발견되지 않아 고정화 효모 반응기에 의한 고속 숙성공정의 현장적 용 가능성이 높음을 확인할 수 있었다.

• 대한치과보철학회지
• /
• 제34권3호
• /
• pp.620-631
• /
• 1996

Bonding of resin to cast alloy has traditionally been provided by mechanical retention. But, chemical bonding methods such as silicoating, tin plating, heat treatment, application of 4-META adhesives, have been developed to overcome the problems of the mechanical bonding methods. Silicoating has been used availaby in fixed prosthodontics, but is also reported to be used in removable prosthodontics. The aim of this study is to measure the tensile bond strength between resin and metal, and compare the effect of the type of metal and the grain size of the aluminum oxide on the bond strength, after metal surface roughening, coating of the opaque resin, and curing of heat-curing resin were performed. The test groups were divided into 4 groups according to the cast alloys and the aluminum oxide particles used. Group 1 : Type 4 gold alloy(DM66) blasted with $$50{\mu}m\;Al_{2}O_3$$ Group 2 : Type 4 gold alloy(DM66) blasted with $$250{\mu}m\;Al_{2}O_3$$, Group 3 : Co-Cr alloy(Nobilium) blasted with $$50{\mu}m\;Al_{2}O_3$$ Group 4 : Co-Cr alloy(Nobilium) blasted with $$250{\mu}m\;Al_{2}O_3$$ * 10 test specimens were made on each group. The specimens were thermocycled, and Instron Universal testing machine was used to measure the tensile bond strength of the finished specimens. The results were as follows : 1. Bond strengths showed that the group of gold alloy blasted with $250{\mu}m$ aluminum oxide particle had higher bond strength, and the group of gold alloy blasted with $50{\mu}m$ aluminum oxide particles had lower bond strength than any of the other groups. 2. Gold alloy had significantly higher bond strength when blasted with $250{\mu}m$ aluminum oxide particles than $50{\mu}m$, but. Co-Cr alloy showed no statistically significant difference between the two particle sizes. 3. When blasted with $50{mu}m$ aluminum oxide particles, Co-Cr alloy showed significantly higher bond strength than gold alloy. And, when blasted with $250{\mu}m$ aluminum oxide particles, gold alloy had significantly higher bond strength than Co-Cr alloy. 4. On the examination of the fractured sites, only the group of Co-Cr alloy blasted with $50{\mu}m$ aluminum oxide particles showed a part of residual opaque resin, but all the samples of the other groups fractured between the resin and the metal.

• 한국결정성장학회:학술대회논문집
• /
• 한국결정성장학회 2000년도 Proceedings of 2000 International Nano Crystals/Ceramics Forum and International Symposium on Intermaterials
• /
• pp.1-33
• /
• 2000

Silicon carbide ceramics with sintering additives from the system AlN-Y$_2$O$_3$ can be gas-pressure sintered to theoretical density. While commonly a combination of sesquioxides is used such as Al$_2$O$_3$-Y$_2$O$_3$, the oxynitrid additives offer the advantage that only a nitrogen atmosphere is require instead of a powder. By starting form a mixture of ${\beta}$-SiC and ${\alpha}$-SiC, and by performing dedicated heat treatments after densification, anisotropic grain growth is obtained which leads to a platelet microstructure showing enhance fracture toughness. In the present work, recent improvement of the mechanical behaviour of these materials at ambient and high temperatures is reported. By means of a surface oxidation treatment in air it is possible to obtain four-point bending strengths in excess of 1 GPa, and the strength retention at high temperatures is significantly improved.

• The Korean Journal of Ecology
• /
• 제17권2호
• /
• pp.120-130
• /
• 1994

Stages of vegetation development on talus area were studied to examine temporal changes in species composition and vegetation structure, and to elucidate the mechanism of early patch formation. While ground coverage of lichens, which may form substrate for moss colonization and mitigate the heat-stress on rocks, decreased gradully, coverage of mosses increased slightly during primary succession. Ecological role of mossess related with water retention in community may be very important not only at pioneer stage but also at later stages because of little soil development on this talus area. Species diversity and species richness increased during the early stages of succession. Parthenocis년 tricuspidata and Sorbaria sorbifolia var. stellipa dominated in liana stage, Ulmus davidiana for. suberosa and Lindera obtusiloba in shrub stage, and Fraxinus rhynchophylla and Actinidia arguta in subtree stage, however, was composed of mixed forest of several tree species. U. davidiana for. suberosa, L. obtusiloba, Securinega suffruticosa and Rhus chinensis were relatively important woody species in early patch forming process. The results, however, suggested that early establishment on talus area might be strongly associated with chance for safe-site because both pioneer species and later species could take part in early patch forming process.

• 한국염색가공학회지
• /
• 제20권2호
• /
• pp.9-18
• /
• 2008

Wool has excellent properties, such as heat retention, absorbency, and elasticity, but it has a disadvantage in washability because the fabric will felt and shrink greatly. Felting causes the interlocking of the fiber surface scales with one another. Therefore, the studies on wool finishing have been focused on shrink proofing. Precedent researches on wool shrink proofing are mostly on eco-friendly method. using enzyme. The purpose of this study is to examine the effect of L-cysteine, EDTA in papain treatment of wool fabrics. The specific contents of study are as follows. Depending on pH, temperature, treatment time, enzyme concentration and L-cysteine, EDTA concentration, weight loss, tensile strength, whiteness, SEM were examined. Each papain treatment conditions depending on L-cysteine, EDTA were optimized from these properties. Papain had very low activation without activators. The optimum conditions of papain treatment were pH 7.5, temperature $75^{\circ}C$, time 30minutes(L-cysteine), 180minutes(EDTA) and papain concentration 5%(o.w.f.). In the use of papain 5%(o.w.f.), the activators optimum concentration was L-cysteine 2%(o.w.f.), EDTA 7%(o.w.f.)

• 한국전기전자재료학회논문지
• /
• 제25권5호
• /
• pp.329-333
• /
• 2012

For phase transition method, good record sensitivity, low heat radiation, fast crystallization and hi-resolution are essential. Also, a retention time is very important part for phase-transition. In our past papers, we chose composition of $Ge_1Se_1Te_2$ material to use a Se factor which has good optical sensitivity than conventional Sb. Sb/Ge-Se-Te thin films are fabricated and irradiated with UV light source to investigate a reversible phase change by Sb-doped condition. Because of Sb atoms, the Sb inserted sample showed better performance than conventional one. We should note that this novel one showed another possibility for phase-change random access memory.

• Tribology and Lubricants
• /
• 제34권5호
• /
• pp.191-196
• /
• 2018

Bunker C is used in heavy-lift ships, furnaces, and boilers for generating heat, and power. Bunker C has only four regulations for quality standards and is rarely inspected in Korea. For these reasons, other oils such as used lubricant oil are commonly blended with Bunker C. This illegal mixture of fuel can damage the boilers, engines and affect the environment adversely. In this study, we investigate the fuel properties and perform atomic analysis of illegal Bunker C blended with used lube oil. The test results show that higher quantities of used lube oil in Bunker C have higher flash points, total acid numbers, copper corruption, solid contamination, and metal components. Further, increasing quantities of used lube oil in Bunker C cause lower viscosity, sulfur, and V content. However, adequate sample (approximately 1 L) is needed to evaluate presence of adulterants in Bunker C, we attempted the SIMDIST analysis. In the SIMDIST chromatogram, the used engine oils are detected for longer retention times than Bunker C owing to the high boiling point. We also quantitatively analyzed the lube oil content using SIMDIST.

• Journal of Microbiology and Biotechnology
• /
• 제27권6호
• /
• pp.1065-1070
• /
• 2017

This study aimed to examine the anti-candidal efficacy of a novel ketone derivative isolated from Diaporthe sp. ED2, an endophytic fungus residing in medicinal herb Orthosiphon stamieus Benth. The ethyl acetate extract of the fungal culture was separated by open column and reverse phase high-performance liquid chromatography (HPLC). The eluent at retention time 5.64 min in the HPLC system was the only compound that exhibited anti-candidal activity on Kirby-Bauer assay. The structure of the compound was also elucidated by nuclear magnetic resonance and spectroscopy techniques. The purified anti-candidal compound was obtained as a colorless solid and characterized as 3-hydroxy-5-methoxyhex-5-ene-2,4-dione. On broth microdilution assay, the compound also exhibited fungicidal activity on a clinical strain of Candida albicans at a minimal inhibitory concentration of $3.1{\mu}g/ml$. The killing kinetic analysis also revealed that the compound was fungicidal against C. albicans in a concentration- and time-dependent manner. The compound was heat-stable up to $70^{\circ}C$, but its anti-candidal activity was affected at pH 2.

• 한국의류산업학회지
• /
• 제13권6호
• /
• pp.990-995
• /
• 2011

This study analyzed the effects of the knit stitch type, fiber composition, and yarn thickness on the mechanical properties of knitted fabric. The results were as follows: The course density was the highest in the case of the rib stitch. On the other hand, the wale density was the highest in the case of the float stitch. The thickness was the highest in the case of the rib stitch. The same results were obtained even for different fiber compositions and yarn thicknesses considered in this study. The burst strength of wool knit fabric was higher than that of A/W knit fabric. The stiffness was the lowest in the case of the plain stitch. The same results were obtained even for different fiber compositions and yarn thicknesses. The pilling properties were excellent for all knit stitches, fiber composition, and yarn thicknesses as pilling degree : 5. The air permeability decreased in the following order : rib > plain > float stitch. The same results were obtained even for different fiber compositions and yarn thicknesses. The heat retention rate decreased in the following order : rib > float > plain stitch. The same results were obtained even for different fiber compositions and yarn thicknesses.