• Korean Journal of Poultry Science
• /
• v.50 no.1
• /
• pp.1-13
• /
• 2023

The study was carried out to investigate the effects of dietary combined supplementation of antioxidants as catechin and vitamin C on growth performance, meat quality, blood profiles and stress responses of broilers exposed to high temperature. For this experiment, a total of 360 21-day-old male Ross 308 broilers were used. Treatments were assigned with 6 replicates per treatment and 10 birds per replicate in a 2 × 3 factorial design with vitamin C (0, 250 mg/kg) and catechin (0, 600, 1,200 mg/kg). The heat stress environment was maintained at temperature 32±1℃ and relative humidity 60±5% for 24 hours until the end of the experiment. The supplemented antioxidants had no significant difference in weight gain, feed intake and feed conversion ratio (P>0.05). The content of total cholesterol in blood had no interaction, but decrease (P<0.01) in the supplemented catechin group. Also, the supplementation with catechin showed increase in the SOD activity of blood, and lower corticosterone and IgM levels of broilers. The contents of HSP70 and MDA in liver decrease (P<0.05) with the supplementation of antioxidants, and HSP70 showed an interaction between groups. DPPH radical scavenging ability in breast meat increased (P<0.01) in catechin, but meat quality did not show difference according to treatments. Respiratory rate decreased (P<0.05) in catechin, but no interaction with vitamin C. In conclusion, the combination of vitamin C and catechin can alleviate stress under high temperature, such as HSP70 and MDA, but further study on the optimal supplemental level is needed.

• Korean Journal of Ecology and Environment
• /
• v.56 no.4
• /
• pp.320-329
• /
• 2023

Cadmium (Cd), a heavy metal found in the aquatic environment, accumulates in organisms through the food chain. In the study, we investigated the survival rates, measurement of body Cd levels, and expression analysis of the stress response genes (Heat shock protein 70: HSP70 and Heat shock protein 60: HSP60) and antioxidant enzyme Glutathione S-Transferases (GST) on benthic oligochaete worm Tubifex tubifex exposed three concentrations of Cd, to analyze the bioaccumulation and changes of stress gene expressions to exposure toxicity of the Cd-spiked sediment. Survival rates of T. tubifex exposed to the Cdspiked sediment were 93% at 0.4 mg kg^-1 Cd, 96% at 1.87 mg kg^-1 Cd, and 93% at 6.09 mg kg^-1 Cd for 10 days. Cd concentration in the body of T. tubifex was higher than that in the sediment. After Cd exposures for 10 days, the body Cd levels were 18.4 mg kg^-1, 13.06 mg kg^-1, and 79.11 mg kg^-1 at exposed three concentrations of Cd, respectively. Upregulation of HSP70 gene expression was observed at all concentrations of exposed Cd as a time-dependent manner, whereas transcriptional expression of the HSP60 gene increased as a timedependent manner in T. tubifex exposed to the relative high concentration (6.09 mg kg^-1) of Cd. However, GST gene expression increased on day 1 at all concentrations after Cd exposures, and then downregulated until 10 days. These results indicate to ecotoxicological and molecular effects in benthic oligochaete worm T. tubifex to Cd-spiked sediment and provide the basic information for the utilization of environmental toxicity assessment using the T. tubifex as a aquatic pollution indicator species.

• Clean Technology
• /
• v.30 no.2
• /
• pp.134-144
• /
• 2024

In this study, the mechanical stability of red mud was improved for its commercial use as a catalyst to effectively decompose HFC-134a, one of the seven major greenhouse gases. Red mud is an industrial waste discharged from aluminum production, but it can be used for the decomposition of HFC-134a. Red mud can be manufactured into a catalyst via the crushing-preparative-compression molding-firing process, and it is possible to improve the catalyst performance and secure mechanical stability through calcination. In order to determine the optimal heat treatment conditions, pellet-shaped compressed red mud samples were calcined at 300, 600, 800 ℃ using a muffle furnace for 5 hours. The mechanical stability was confirmed by the weight loss rate before and after ultra-sonication after the catalyst was immersed in distilled water. The catalyst calcined at 800 ℃ (RM 800) was found to have the best mechanical stability as well as the most catalytic activity. The catalyst performance and durability tests that were performed for 100 hours using the RM 800 catalyst showed thatmore than 99% of 1 mol% HFC-134a was degraded at 650 ℃, and no degradation in catalytic activity was observed. XRD analysis showed tri-calcium aluminate and gehlenite crystalline phases, which enhance mechanical strength and catalytic activity due to the interaction of Ca, Si, and Al after heat treatment at 800 ℃. SEM/EDS analysis of the durability tested catalysts showed no losses in active substances or shape changes due to HFC-134a abasement. Through this research, it is expected that red mud can be commercialized as a catalyst for waste refrigerant treatment due to its high economic feasibility, high decomposition efficiency and mechanical stability.

• Asian Journal of Turfgrass Science
• /
• v.18 no.4
• /
• pp.179-191
• /
• 2004

This study was conducted to find out the effect of sodding and seeding time and rate of seed mixtures on the establishment of cool-season turfgrasses by evaluating the turf coverage rates for two years. In fall planting, the required establishment period of full coverage($100\%$) was 1.5 months with a rolled turf sodding(Kentucky bluegrass $100\%$, Kentucky bluegrass $80\%$+perennial ryegrass $20\%$). The $100\%$ turf establishment was achieved in 7 months with Perennial ryegrass $100\%$, and 7.5 months by seeding with Kentucky bluegrass $100\%$(KB 100), Kentucky bluegrass $80\%$+perennial ryegrass $20\%$(KB80+PR20), Kentucky bluegrass $70\%$+perennial ryegrass $30\%$(KB70+PR30). In spring planting, the establishment periods far sod with KB 100 or KB80+PR20 were taken one month. However, in the case of seeding, the establishment periods were 3 months, 3.5 months, 3.5 months and 4 months with PR100, KB80+PR20, KB70+PR30, and KB 100, respectively Comparing the turf establishment vigor between fall and spring planting, the vigor was higher In spring planting than in fall planting in both sodding and . seeding. In the case of spring planting, the most proper time for turf establishment was tested on April, May, and June trials. The effect was significant in establishment vigor. The result showed highest on April planting. On May and June trials, establishment vigors were decreased gradually As the mixture rate of PR increased, ryegrass, establishment vigor was decreased with the rates. These results indicated that perennial ryegrass has relatively less tolerant to summer heat than Kentucky bluegrass. Number of shoots in 95 days after seeding was higher in KB100 by 16,600 per $m^2$ than in PR100 by 12,400 per $m^2$, while the lowest number showed in KB50+PR50 by 3,300 per $m^2$. Those in KB80:PR20, KB70:PR30 were 6,700 and 4,900 per $m^2$, respectively. The ratios of tillers according to mixture rates between Kentucky bluegrass and perennial ryegrass were KB80:PR20=87:13, KB70:PR30=78:22, and KB50:PR50=48:52. According to results in this study, Ideal seeding time might be spring (April) than in fall (September), and proper mixture rate was $80\%$ of Kentucky bluegrass with $20\%$ of perennial ryegrass.

• Asian-Australasian Journal of Animal Sciences
• /
• v.18 no.1
• /
• pp.96-101
• /
• 2005

There were two trials involved in the experiment. Trial 1: the trial was conducted on two Taiwan Sugar Corporation (TSC) pig farms. One was located in the north of Taiwan and the other was located in the south. Both farms had wet pad and forced ventilation (WPFV) and conventional open design (COD) boar and sow houses. There were 12 Duroc boars, age ranging from 12-24 months. Half of them (6 boars) were raised in a WPFV pig house, and the other half were kept in a COD house. Semen was collected at 5-day intervals from May $1^{st}$ to the end of October. Sixteen sows (2-8 parity) were served by artificial insemination each week from the beginning of May to the end of Oct. These sows were checked for heat from 18 days to 25 days after insemination. Trial 2: there were four MPFV boar houses involved in the test. Two houses were located in the north of Taiwan, and the other two houses were located in the south. The test was conducted from January 2000 to December 2001. The total number of serviced sows by MPFV-housed boars was 35,105 head and for COD-housed boars 103,065 head. The results showed that the total semen volume, density of sperm, total sperm per ejaculate, sperm motility and morphological abnormality were significantly better (p<0.01) for boar raised in WPFV house than for COD houses. Average sperm motility in June and July was lower than for the other months. Morphological abnormality was higher during May, June and July. Although the results did not reach a significant level, the average value showed that the total volume of boar semen was higher in the north than for the south. The total semen volume production of boar raised in WPFV was higher than for boars raised in COD house, reaching a significant level only in summer. Boars kept in WPFV house had higher total sperm number than boars kept in COD house, reaching a significant level in spring (p<0.05), summer (p<0.01), and fall (p<0.05) but not in winter (p>0.05). Boars raised in WPFV house had significantly higher sperm motility than boars in COD house during spring (p<0.001), summer (p<0.001), fall (p<0.01) and winter (p<0.05). The average farrowing rate and piglets born alive were higher for boars in WPFV house than for boars in COD house, but neither reached a significant level (p>0.05). The present experiment shows that WPFV house can improve the reproduction performance of boars.

• Korean Journal of Materials Research
• /
• v.4 no.8
• /
• pp.870-876
• /
• 1994

In order to investigate the growth behavior of $Y_{2}Ba_{1}Cu_{1}O_{5}$(211) particles in $Y_{1}Ba_{2}Cu_{3}O_{7-\delta}$(123), 123 samples were quenched in air after heat treatment on polycrystal and single crystal MgO substrates at $1100^{\circ}C$ for various periods. 211 grains grew with the increase in holding time. The growth of 211 grains was faster on the polycrystal MgO substrate than on the single crystal MgO substrate. In the samples with the compositions of 211+xCuO($0.2\le X \le 0.8$), the growth rate of 211 grains increased with the increase in CuO content. In the sample with x=0.6 the largest 211 grains were observed. 211 grains in the $Y_{2}Ba_{1}Cu_{1.8}Sn_{0.1}O_{5+\delta}$ samples were distributed very finely and homogeneously. The retarding effect of $SnO_2$ addition on the growth of 211 grain appeared more pronounced in a CuO melt than in a $BaCuO_{2}$+ CuO melt.

• Economic and Environmental Geology
• /
• v.4 no.1
• /
• pp.11-18
• /
• 1971

The geotectonics and geomorphic structure of Korea resulted from the Song-rim Disturbance and the Daebo orogenic movements. Afterward this mountainous peninsula underwent several geological changes on a small scale, and it was also claimed that the steady rising of the elevated peneplain of the eastern coast and the submerging of the southwestern coastal area are largely due to the tilted block movement. These views have been generally accepted good in several ways, but they are limited in range or lacking in theoretical integration. The present writer investigated the geology of the Mt. Chi-ri-san and the Honam coal mining area for a geological map in 1965, respectively. The results of these studies convinced the present writer that the conventional views, which were based upon a theory of lateral pressure should be reconsidered in many respects, and more recent studies made it clear that the morphological development in the southwestern area can be better explained by the orogenic movement and rock control. The measurement of submerging speed of the western coastal area (Pak. Y. A., 1969) and a new account on the geology and tectonics of the Mid-central region of South Korea (Kim O.J., 1970) act as an encouragement to a new explanation. The present writer's researches on the extreme southwestern portion of the peninsula show that the steady submerging of this area cannot be attributed to a simple downthrown block phenomenon caused by block movement. It is no more than the result of the differential movement of uplifting in the eastern and western coastal areas and the rising of sea-level in the post-glacial period. This phenomenon could be easily explained by the comparison of the rate of rise in sea-level and amount of heat flow between Korea and other areas in the world. The existance of the erosional planes in the Sobaik-San ranges also provide an evidence of an upheaval in the western coast area. Though the Sobaik-San ranges largely follow the direction of the Sinian system. They consist of the numerous branches, whose trends run more or less differently from their main trend because of the disharmonic folding, are converged into Mt. Sobaik-San and Chupungryung. The undulation of the land is not wholely caused by orogenic movements, where as the present writer confirmed that the diversity of morphological development is the direct reflection of geological conditions such as rocks and processes which constitute the basic elements of geomorphic structure. An east-west directed mountain range which could be named as Hansan mountain range, was claimed to be oriented by the joint control. The geological conditions such as a special erosion and weathering of agglomerate and breccia tuff usually produce pot-hole like submarine features which cause the whirling phenomenon at the southwestern coast channel.

• Fashion & Textile Research Journal
• /
• v.16 no.6
• /
• pp.945-953
• /
• 2014

This study aims to develop protective pants to relieve impact from falls and to present basic data for the development. The survey results are as follows; First, 45% of the respondents were in their 60s and 55% of them were in their over 70s and older. Also, 64% of them have fallen once for the past year and 36% of them have fallen twice or more. The older they were, the more there were those who have fallen twice or more. This indicated the older people has experienced more fall accidents again after a initial fall accident. Second, as per accident situations, the survey showed that fall accidents happened the most in the winter and in the afternoon (12-18 pm). Also, it happened on a street mostly and they were wearing sneakers or hiking boots when they got a hurt slipped in a front or side by missing their step in a walk. The injury areas are mostly knee and ankle. They had the bruises or a sprain in their knee and ankle mostly. The rate of bone fracture was 19.5%. Therefore, the protection area to falls in lower body is the knee. But hip and hip joint should be protected with knee as well because those are usually be broken when it is damaged. Third, approximately 80% of those who were hospitalized for treatment had surgery. Patients who had surgery were rather in their over 70s than in their 60s. The older they were, the more serious their fracture was. The period of hospital or outpatient treatment is more than three weeks in many cases. They responded their health got worse after falls. Aftereffects of accidents were physical discomfort, anxiety and medical costs. Falls to the old makes physical damage, psychological damage, which cause reduced physical activity and the increased cost of health care with economic losses. So it results on a negative impact on the life of the old. Fourth, elderly females were rarely aware of impact protective clothing and they have never purchased such clothing. For impact protective pants, the major consideration was suitable design for their body types. They liked casual style with front or side pockets and simple designs without any patterns or decorations. As per pants materials, they responded that they need functionality, activity and elasticity. Among the functional points, insulation of cloths are considered importantly, so the heat reservance of material in the impact protective pants should be considered carefully.

• Journal of the Society of Disaster Information
• /
• v.8 no.1
• /
• pp.18-26
• /
• 2012

Accordingly architectural structure is getting high-rise and bigger, a use of high strength and high performance concrete has been increasing. High performance concrete has cons of explosion in a fire. This Explosion in the fire can cause the loss of the sheath on a concrete surface, therefore it effects that increasing a rate of heat transmission between the steel bar and inner concrete. Preventing this explosion of high performance concrete in the fire, many kinds of researches are now in progressing. Typically, researches with using Polypropylene-fiber and Steel-fiber can prove controling the explosion, but the reduction of mobility was posed as a problem of workability. Consequently, to solve the problem as mentioned above, concrete cans secure fire resisting capacity through the using of coating liquid, including Ester-lubricant and non-ionic characteristic surfactant. This research has been drawn a ideal condition in compressive strength areas of concrete by an experiment. When applying 13mm of polyamide-fiber, proper fiber mixing volume by compressive strength areas of concrete is $0.8kg/m^3$ in 60MPa, $1.0kg/m^3$ in 80MPa, $1.5kg/m^3$ in $100MPa/m^3$. These amount of a compound can control the explosion.

• Journal of Energy Engineering
• /
• v.20 no.1
• /
• pp.13-20
• /
• 2011

The high fuel flexibility of Micro Gas Turbine(MGT) has boosted their use in a wide variety of applications. Recently, the demand for biogas generated from the digestion of organic wastes and landfill as a fuel for gas turbines has increased. We researched the influence of firing landfill gas(LFG) on the performance and operating characteristics of a micro gas turbine combined heat and power system. $CH_4$ and $CO_2$ simultaneous recovery process has been developed for field plant scale to provide an isothermal, low operating cost method for carrying out the contaminants removal in Land Fill Gas(LFG) by liquid phase catalyst for introduce into the green house for the purpose of $CO_2$ rich cultivation of the plants. Methane purification and carbon dioxide stripping by muti panel autocirculation bubble lift column reactor utilizing Fe-EDTA was conducted for evaluate optimum conditions for land fill gas. Based on inflow rate of LFG as 0.207 $m^3$/min, 5.5 kg/$cm^2$, we designed reactor system for 70% $CH_4$ and 27% $CO_2$ gas introduce into MGT system with $H_2S$ 99% removal efficiency. A green house designed for four different carbon dioxide concentration from ambient air to 1500 ppm by utilizing the exhaust gas and hot water from MGT system.