• Applied Chemistry for Engineering
• /
• v.28 no.4
• /
• pp.383-396
• /
• 2017

The photothermal therapy is a method of cell ablation using the heat converted from the incident light by photothermal transducers. It offers a selective treatment to desired abnormal cells, in particular, tumor tissues. Among various photothermal agents, gold nanoparticles (Au NPs) have received enormous attention due to their unique physicochemical property over last two decades. In this review, we address research strategies and methods to improve treatment efficacy by organizing recent research works. We mainly focus on research works to enhance light-to-heat conversion via optimizing the morphology of Au NPs and related assemblies as well as the strategies to deliver Au NPs efficiently to specific targets. We also introduce convergence research efforts to combine Au NP-mediated photothermal treatment and other functions such as diagnostic capabilities and other therapeutic methods.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.30 no.1
• /
• pp.123-128
• /
• 2004

Numerous novel ingredients have been introduced for the higher functionality of whitening cosmetics. Through the preliminary research, we have found Trichosanthes kirilowii root, Prunella vulgaris leaf and Clematis chinensis root have high whitening efficacy. But they are insoluble. Moreover the discoloration of and decrease in content take place when they are exposed to light, heat or oxygen. From Trichosanthes kirilowii root, Prunella vulgaris leaf and Clematis chinensis root, efficacious ingredients were ethanol-extracted by heating to 75∼85$^{\circ}C$ for 6∼8 h. These extracts have the inhibitory activity of tyrosinase and B16 melanin formation, thus enhancing whitening effect. We made liposomes using propylene glycol (PG)/hydrogenated lecithin/middle chain triglycerides (MCT)/glycerin/water and microfuidizer to stabilize extracts. The stability against heat and light was enhanced by 3∼5 times compared with untreated extracts. Particle size analyzer, freeze fracture transmission electron microscopy (FF-TEM), chromameter and HPLC are used for the analysis.

• Restorative Dentistry and Endodontics
• /
• v.19 no.1
• /
• pp.169-179
• /
• 1994

The purpose of this study was to compare and evaluate the bleaching efficacy of three nonvital bleaching techniques: Walking bleaching, Walking bleaching and heat application, and Walking bleaching and bleaching light application. 36 extracted anterior teeth with intact crowns were immersed in 5 % sodium hypochlorite solution for twenty-four hours to loosen extrinsic debris. Lingual access openings were prepared in all teeth and the pulps were extirpated. The teeth were stored in 5% sodium hypochlorite for twenty-four hours to open the dentinal tubules and they were stained via whole blood. Once the teeth were stained, they were evaluated with Colorimeter. The teeth in each group were ranked from lightest to darkest and divided equally into three experimental groups in which the following bleaching techniques were used. Intracoronal base was placed 2mm below cementoenamel junction. Group 1 Walking bleaching (Superoxol + Sodium perborate) Group 2 Heat application + Walking bleaching (Superoxol+Sodium perborate) Group 3 Light application+Walking bleaching (Superoxol+Sodium perborate) The bleaching agents were changed every 3 days and the teeth were bleached for a total of 14 days. The teeth were evaluated with Colorimeter before the start of any bleaching and on day 14. The results were as follows: 1. At the end of 14 days, all the sample teeth demonstrated the increase of Lightness Index at cervical 1/3 of crown (p<0.05) Lightness Index was significant difference in group 2 and 3, but there were some minor differences among groups (p>0.05). 2. In all groups, there was significant difference in red chromacity (p<0.05), but there were some minor differences among groups (p>0.05). 3. In all groups, there was no significant difference in yellow chromacity (p>0.05).

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.29 no.1
• /
• pp.6-11
• /
• 2019

Methylammonium lead halide ($MAPbX_3$, X = I, Br) thin films, used as the light absorber of perovskite solar cells, were prepared using the dual feed ultrasonic spray method. Going through a deposition at a substrate temperature of below $60^{\circ}C$ and then a final heat treatment at $75^{\circ}C$ for 5 minutes using dual feed ultrasonic spray method, $MAPbI_3$ single phase could be formed. Whereas undergoing a deposition at temperatures above $80^{\circ}C$, the spheroidal grains could be changed into rod-shaped fractal structures due to the decomposition of the perovskite phase. Furthermore, using the same method at a higher heat treatment temperature of $100^{\circ}C$, $MAPbI_{3-x}Br_x$ thin films could also be formed from $MAPbI_3$ and $MAPbIBr_2$ solution.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2020.06a
• /
• pp.148-149
• /
• 2020

Currently, the most commonly used EPS insulation material has been mainly used because its ease of adhesion with concrete. However, due to poor adhesion with wallpaper, separate adhesion needs to be strengthened and there are cases of breakage or grooves in the process of dismantling the mold. The biggest problem is that when a fire breaks out, various harmful substances are present and highly flammable. Cork used in this study is a truly eco-friendly building material that is taken from between the outer and inner bark of cork trees and does not damage the wood. Also, it is a porous material that is made up of countless cells and contains an air gap between the cells. It is very light in weight between 0.06 and 0.07 and has excellent insulation with a heat conductivity of 0.04W/mK. In addition, it has high stability in the topic of conversation because it does not produce harmful gas when burned and has self-sustaining properties. However, research on cork, an eco-friendly building material with excellent performance to date, is scarce Therefore, we encourage existing scholars to raise interest in new eco-friendly building materials through this study. It also aims to manufacture insulation boards with new inorganic properties using the low weight and heat conductivity held by the cork.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.58 no.3
• /
• pp.357-361
• /
• 2009

This study performed analysis on the thermal pattern and current characteristics of an LED ((Light Emitting Diode) street lamp. It did this using a TVS (Thermal Video System) to analyze the LED street lamp's thermal pattern, and measured its characteristics using an oscilloscope. The ambient temperature and humidity during the experiment were maintained at $24{\pm}2[^{\circ}C]$ and 50~60[%]. The capacity of the LED street lamp was 120[W] and nine sets of modules were arranged at uniform intervals. On one module, 24 LED lamps were arranged in a radial pattern. The analysis of the thermal diffusion pattern at the front of the LED lamp showed that the maximum surface temperature was approximately $34[^{\circ}C]$. In addition, there was almost no change in the temperature of the upper cover, and the temperature at the side showed a uniform thermal diffusion pattern. The surface temperature of the converter converting AC to DC increased to approximately $46[^{\circ}C]$. The analysis results of the thermal characteristics of one LED indicated uniform thermal characteristics for an initial eight minutes. However, the temperature at the center of the LED increased to approximately $82[^{\circ}C]$ after 12 minutes had elapsed. It can be seen from this that the temperature at the center of the LED was higher than the allowable temperature, $70[^{\circ}C]$ of the insulating material for general electrical devices. Therefore, it is necessary to design a lamp in such a way that the plastic insulating material does not come into contact with or get close to the LED lamp. The voltage of the LED lamp converted by the AC/DC converter was measured at DC 27[V] and the current was DC 13[A]. Consequently, it can be seen that in order to secure an adequate light source, it is important to supply a stable current that was greater than the current of other light sources. Therefore, appropriate radiation of heat is required to secure the stability and reliability of the system.

• Korean Journal of Optics and Photonics
• /
• v.26 no.4
• /
• pp.226-232
• /
• 2015

A double-layer LED array together with an illumination optical system is proposed as a possible light source for LC projection display systems for large screens, up to $8m{\times}6m$ (400 inches diagonal). The heat dissipation problem of the LED array is solved by arranging the LEDs in double layers, and thermal analysis shows its effectiveness. The light from the LEDs in the back layer can be transmitted through the front layer without significant loss by arranging the LEDs in non-overlapping positions in the two layers and inserting suitable microlenses between the two layers and holes in the first layer. Together with the double-layer LEDs, an illumination optical system is designed to illuminate liquid crystal panels with good uniformity and appropriate matching with the projection optics.

• Journal of Radiation Protection and Research
• /
• v.43 no.4
• /
• pp.160-169
• /
• 2018

Background: This study aims to develop an integrated optical system that can simultaneously or selectively measure the signals obtained from radioluminescence (RL), thermoluminescence (TL), and optically stimulated luminescence (OSL), which are luminescence phenomena of materials stimulated by radioactivity, heat, and light, respectively. The luminescence mechanism of various materials could be investigated using the glow curves of the luminescence materials. Materials and Methods: RL/TL/OSL integrated measuring system was equipped with a X-ray tube (50 kV, $200{\mu}A$) as an ionizing radiation source to irradiate the sample. The sample substrate was used as a heating source and was also designed to optically stimulate the sample material using various light sources, such as high luminous blue light emitting diode (LED) or laser. The system measured the luminescence intensity versus the amount of irradiation/stimulation on the sample for the purpose of measuring RL, TL and OSL sequentially or by selectively combining them. Optical filters were combined to minimize the interference of the stimulation light in the OSL signal. A long-pass filter (420 nm) was used for 470 nm LED, an ultraviolet-pass filter (260-390 nm) was used for detecting the luminescence of the sample by PM tube. Results and Discussion: The reliability of the system was evaluated using the RL/OSL characteristics of $Al_2O_3:C$ and the RL/TL characteristics of LiF:Mg,Cu,Si, which were used as dosimetry materials. The RL/OSL characteristics of $Al_2O_3:C$ showed relatively linear dose-response characteristics. The glow curve of LiF:Mg,Cu,Si also showed typical RL/OSL characteristics. Conclusion: The reliability of the proposed system was verified by sequentially measuring the RL characteristics of radiation as well as the TL and OSL characteristics by concurrent thermal and optical stimulations. In this study, we developed an integrated measurement system that measures the glow curves of RL/TL/OSL using universal USB-DAQs and the control program.

• Journal of Bio-Environment Control
• /
• v.22 no.3
• /
• pp.270-278
• /
• 2013

The objective of the present study is to provide data needed to decide covering method to be able to increase the thermal insulation and light transmittance efficiency of commercial greenhouse. The thermal insulation effect, PPF transmittance and quantity of condensation water were estimated in experimental tomato greenhouses covered with three types of coverings of single layer, air inflated and conventional double layers covering. The overall heat flow of air inflated double layers greenhouse was similar to that of conventional double layers greenhouse, but the temperature between covering material and thermal screen in air inflated double layers greenhouse was lower than that in conventional double layers greenhouse at the same outside temperature condition due to air leakage through the gap of roof vent. The overall heat transfer coefficients acquired by experiment that was performed in single layer and conventional double layers greenhouses were close to those obtained from model experiment. Even though the PPF transmittance of air inflated double layers greenhouse was lower than that of single layer greenhouse, which was greater than that of conventional double layers greenhouse. The quantity of condensation water on covering surface of single layer greenhouse was greater than that of air inflated double layers greenhouse due to lower covering surface temperature.

• Korean Journal of Acupuncture
• /
• v.27 no.4
• /
• pp.1-4
• /
• 2010

Objectives : The purpose of this study is to summarize the historical aspects of parabolic reflector moxa and to suggest the applications of light moxibustion in Korean medicine. Results : Getting a fire by parabolic reflector(concave mirror) is well known because of the Olympic torch lighted with a solar reflector in Greece. From anecdotes or myths for Diocles and Archimedes(third century B.C.) a long history has been chronicled in books and films in western culture. However, it has another history in Asian countries since 2,000 years ago. Some reflectors had a tiny size with 6.5 to 10 cm in diameter, 4 mm to 1 cm thickness, and these mobile handheld devices could make us guess that they have been used for multiple purposes. Bronze reflectors were described in Dongeui-bogam, and excavated from the ancient remains of the Shilla and Koryo dynasties. This common firing device was used as a moxibustion device, one of the acupuncture and moxibustion modalities in traditional Korean medicine. Conclusions : Reflector moxa has been used as a light moxibustion to deliver heat energy to acupuncture points, muscles, and skin along meridians. We present a plausible proposal to improve other phototherapy modalities including reflector moxa in Korean medicine practice.