• 한국철도학회논문집
• /
• 제13권5호
• /
• pp.481-487
• /
• 2010

구형 지하철 전동차의 내장재에 대하여 ISO 9705 시험 설비를 이용하여 화재시험을 수행하였다. 시험에 사용된 점화용 버너는 CEN/TS 45545-1 규정에 따라 출력을 조정하였다. 이 내장재 화재시험의 목적은 화원의 규모에 따라서 철도차량에서의 화재거동과 화염의 전파 경로를 평가함과 동시에 객실 내장재의 화재가 플래시오버로 진행하는 경로의 화재 데이터를 제공하는 것이다. 시험으로부터 시간에 따른 위치 별 온도 값과 열류량 및 열방출률을 측정하였고 열방출률은 수정된 화염면적기반 합량법으로 계산한 결과와 비교하였다. 이 시험 결과는 CFD 화재 시뮬레이션 기법을 이용한 철도차량 화재해석의 검증 데이터로 활용될 수 있을 것이다.

• Journal of the Korean Wood Science and Technology
• /
• 제43권4호
• /
• pp.478-485
• /
• 2015

본 연구에서는 목재의 화재 안정성 평가에 대한 기초 자료를 구축하기 위하여 연소 성능 및 열적 특성을 분석하였다. 열특성 분석은 콘 칼로리미터 시험 방법과 열중량 분석(TGA)으로 열방출률, 총 방출열량, 연소 가스 발생, 그리고 중량 감소를 분석하였다. TGA 분석에서 시료의 열분해 온도는 스트로브 잣나무 $359.83^{\circ}C$, 서어나무 $359.80^{\circ}C$, 이태리 포플러 $363.14^{\circ}C$, 졸참나무 $358.59^{\circ}C$, 산벚나무 $362.11^{\circ}C$로 나타났다. 열방출률의 최댓값은 서어나무로 나타났으며, 최솟값은 스트로브 잣나무로 나타났다. 총방출열량을 분석한 결과, 서어나무가 가장 높은 값을 나타내었고, 이태리 포플러가 가장 낮은 값을 나타내었다. 가스분석 결과에서는 산벚나무가 $CO/CO_2$ 비율이 최소치로 0.021로 확인되었고, 졸참나무가 0.031로 최대치를 나타내었다. 중량감소율의 최솟값은 산벚나무가 87.57%로 나타났으며, 졸참나무가 95.03%로 CO와 $CO_2$의 발생과 목재 연소의 거동과의 상관관계를 나타내었다. 본 연구는 목재의 실내 적용 시 화재 안정성 향상 등의 기초 자료로써 매우 유용할 것으로 판단된다.

• 한국자동차공학회논문집
• /
• 제13권5호
• /
• pp.188-194
• /
• 2005

The direct injection diesel engine is one of the most efficient thermal engines. For this reason DI diesel engines are widely used for heavy-duty applications. But the world is faced with very serious problems related to the air pollution due to the exhaust emissions of diesel engine. So, that is air pollution related to exhaust gas resulted from explosive combustion should be improved. Exhaust Gas Recirculation(EGR) is a proven method to reduce NOx emissions. In this study, the experiments were performed at various engine loads while the EGR rates were set from $0\%$ to $30\%.$ The emissions trade-off and combustion of diesel engine are investigated. The brake specific fuel consumption rate is very slightly fluctuated with EGR in the range of experimental conditions. The ignition delay increased with increasing EGR rate. The maximum value of premixed combustion for the rate of heat release is increased with increasing EGR rate. NOx emissions are decreased with increasing EGR rate at high load and high speed. It was found that the exhaust emissions with the EGR system resulted in a very large reduction in oxides of nitrogen at the expense of higher smoke emissions.

• 한국화재소방학회논문지
• /
• 제29권6호
• /
• pp.13-19
• /
• 2015

이 연구에서는 인(P)-질소(N)의 첨가제로 처리된 리기다 소나무의 연소성을 시험하였다. 15 wt%의 인-질소 첨가제 수용액으로 리기다 소나무에 3회 붓칠하여 실온에서 건조시킨 후, 콘칼로리미터(ISO 5660-1)를 이용하여 연소성을 시험하였다. 그 결과, 인-질소 첨가제로 처리한 시험편은 피로인산/암모니움이온 첨가제로 처리한 시험편을 제외하고, 처리하지 않은 시험편에 비하여 착화시간이 90~148 s으로 길었다. 또 불꽃소멸시간은 556~633 s으로서 길게 측정되었다. 그러나 인-질소 첨가제로 처리한 시험편은 무처리 시험편에 비해 각각 12.5~43.4% 정도 높은 평균열방출률과 11.8~43.1% 정도 높은 총열방출률을 나타내었다. 특히, 인-질소 첨가제로 처리한 시험편의 유효연소열은 15.60~18.37MJ/kg으로서 순수 리기다 소나무 시험편에 비하여 2.9~17.5% 낮게 나타났다. 따라서 인-질소 첨가제로 처리한 시험편은 순수 리기다 소나무 시험편에 비하여 연소 억제성을 부분적으로 향상시켰다.

• 설비공학논문집
• /
• 제9권2호
• /
• pp.221-228
• /
• 1997

A strong combustion-driven sound from a surface burner made of a perforated metal fiber plate for premixed gas was investigated to clarify the physical mechanism of its generation. A simple model was developed for the acoustic power generation in terms of the heat transfer response function and the acoustic impedance of the burner. The acoustic impedance of the perforated metal fiber placed on the open exit was measured and the heat release response of the burner to the oscillating flow associated with the acoustic disturbance was expressed in terms of a response function. It was found that the power is generated by the heat release in response to the downstream particle velocity, in contrast to the upstream velocity in the case of the Rijke oscillation driven by a heater placed in the lower half of a columm with upstream flow. The measured frequencies of the oscillation were in agreement with the estimated resonance frequencies and their excitation was varied with the combustion conditions. For the same fuel rate, the excited frequency increases with the air ratio if it is low but decreases with the ratio if not so low. Such frequency characteristics were explained by assuming a heat release response function with a time constant and it was shown that the excited frequency decreases as the time constant increases.

• 한국자동차공학회논문집
• /
• 제16권3호
• /
• pp.60-65
• /
• 2008

A typical louvered-fin oil cooler can be easily contaminated under dusty environment hence resulting in poor performance of a heat exchanger. Thus, in this study, a dust-proof oil cooler has been studied with a unique shape of a 3-dimensional wavy fin since non-louvered fins could have better performance under dusty environment compared to louvered fins. Recently, they have been introduced to commercial and constructional vehicles in Japan. At first numerical analysis has been done to optimize the angle of the wavy fin so that the oil cooler developed can satisfy the target performance. The wavy fin has been then made with roll-forming and roll-pitch stands, and a prototype of an oil cooler with the wavy fin has been finally built with brazing. The performance test showed that the heat release rate of the oil cooler was well beyond the target, 4.94kW and the air-side pressure drop was below the criterion, 0.19kPa. In addition, the results showed that the numerical prediction was effective enough to design the dust-proof oil cooler that satisfies the performance criteria.

• 대한기계학회논문집B
• /
• 제37권8호
• /
• pp.743-752
• /
• 2013

본 논문은 대형 상용기관을 모사한 정적연소실에서 매립지 가스의 연소 특성에 대한 복수의 논문 중 두 번째로, 연소압력 측정을 기반으로 연소과정을 해석하였다. 해석 결과 연소에 유리한 조건일수록 두 개의 압력 정점이 존재하며, 이는 연소에 의한 열발생과 열전달에 의한 냉각효과의 상호 작용이며 두 정점의 크기는 미연가스 분율에 따라 달라진다. 또한 연소과정 중 열발생에는 4개의 주요 변곡점이 발생하고, 이는 점화위치로부터 화염전파에 따른 전열 면적 변화과정이 주원인이며 연소에 불리한 조건일수록 변곡점은 증가하고 열발생은 복잡한 형태를 지니는데, 이는 연소기간 연장이 주원인이다. 결론적으로 점화위치와 관련된 화염전파 과정 및 전열 면적의 변화과정 그리고 대형 연소실에 의한 연소기간 연장의 효과가 상호 복잡하게 작용하면서 매우 특이한 형태의 열발생 곡선이 생성된다.

• 한국자동차공학회논문집
• /
• 제12권2호
• /
• pp.24-31
• /
• 2004

A cylindrical constant volume combustion bomb is used to investigate the combustion characteristics and to analyzer the heat quantity of inhomogeneous charge methane-air mixture. To analyze the heat quantity, some definitions including the CHR ratio, the UHC ratio and the HL ratio are needed and are calculated. It is shown that the effect of stratification is not significant in case of the overall excess air ratio of 1.1, mainly due to the higher heat loss and lower thermal efficiency compared to those of homogeneous condition. In the case of the overall excess air ratio of 1.4, as the initial charge pressure decreases, the CHR ratio has been decreased while the HL ratio has been increased, Generally, as the initial charge pressure increases, the amount of injection mixture has been decreased and has resulted in lower mean velocity and turbulence intensity for injection mixture. Also, the injected mixture is too rich to result in mixing deficiency in combustion chamber. From these results, it could be possible to acquire the improvement of thermal efficiency and the reduction of heat loss simultaneously through the 2-stage injection in CNG direct injection engine.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 제26회 KOSCO SYMPOSIUM 논문집
• /
• pp.7-12
• /
• 2003

The purpose of this work is to investigate the effect of premixing condition on the combustion and exhaust emission characteristics in a HCCI diesel engine. To form homogeneous charge before intake manifold, the premixed fuel is injected into premixed tank by GDI injection system and the premixed fuel is ignited by direct injected diesel fuel. But in the case of high intake air temperature, premixed fuel is auto-ignited before diesel combustion and soot emission is increased. In the case of light load condition, the BSFC is improved by intake air heating because increased air temperature promoted the combustion of premixed mixture. NOx and smoke concentration of exhaust emissions are reduced compared to conventional diesel engine. The combustion characteristics of the HCCI diesel engine such as combustion pressure, rate of heat release, and exhaust emission characteristics are discussed.

• 한국연소학회지
• /
• 제22권2호
• /
• pp.9-18
• /
• 2017

In this study, we measured that fire characteristics of four wood species using indoor finish materials. Wooden specimens were treated with fire retardant chemicals such as diammonium phosphate and potassium carbonate. The wooden specimens are Larix kaempferi, Pinus koraiensis, Cryptomeria japonica, and Chamaecyparis obtusa, which are used for indoor finish. The heat release rate (HRR) values of fire retardant treated woods were confirmed lower than that of untreated woods. For specific details, the HRR values of vacuum impregnated specimens for Pinus koraiensis and Cryptomeria japonica were measured lower than coatings. However, those of Larix kaempferi and Chamaecyparis obtusa showed the opposite effect to it. Total heat release rate values of all wooden specimens, vacuum impregnated were lower than coated specimens.