• Computers and Concrete
• /
• 제21권1호
• /
• pp.67-74
• /
• 2018

A differential scheme based micromechanical framework is proposed to obtain the effective properties of the saturated concrete repaired by the electrochemical deposition method (EDM) considering the interfacial transition zone (ITZ) effects. The constituents of the repaired concrete are treated as different phases, consisting of (micro-)cracks, (micro-)voids and (micro-)pores (occupied by water), deposition products, intrinsic concrete made up by the three traditional solid phases (i.e., mortar, coarse aggregates and their interfaces) and the ITZs. By incorporating the composite sphere assemblage (CSA) model and the differential approach, a new multilevel homogenization scheme is utilized to quantitatively estimate the mechanical performance of the repaired concrete with the ITZs. The CSA model is modified to obtain the effective properties of the equivalent particle, which is a three-phase composite made up of the water, deposition products and the ITZs. The differential scheme is employed to reach the equivalent composite of the concrete repaired by EDM considering the ITZ effects. Moreover, modification procedures considering the ITZ effects are presented to attain the properties of the repaired concrete in the dry state. Results in this study are compared with those of the existing models and the experimental data. It is found that the predictions herein agree better with the experimental data than the previous models.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2010년도 춘계학술발표대회 초록집
• /
• pp.22-22
• /
• 2010

주물과 용접에서 응고 과정에서 수지상간 또는 세포상간 영역에서 최종적으로 응고하는 저융점 공정 조성의 상이 응고균열의 발생에 직접적으로 영향을 미친다. 작은 량의 공정조성의 액상 필름이 응고된 고상과 고상 사이에 존재하게 되면 이 영역에서 생성되는 불연속부는 응고균열로 남게 된다. 이러한 공정조성 액상의 유동성이 좋고 충분한 부피로 존재한다면 응력과 부피수축등으로 생성된 수지상간, 또는 세포상강 영역에서 생성된 불연속부로 용이하게 유동하여 불연속부를 충진하게 된다. 따라서 발생한 응고균열이 치유되는 효과를 얻을 수 있다. 반면에 공정조상의 상이 전혀 존재하지 않는 순금속 응고의 경우에는 최종 응고 단계에 액상 필름이 존재하지 않게 되어 고상과 고상의 인터로킹이 가능하게 되어 균열 발생 가능성이 희박하다. 따라서 응고균열 발생을 제어할 수 있는 효과적인 방법은 용탕이나 용접금속의 조성을 공정 조성에 가깝게 제어하는 것이다.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2017년도 춘계학술대회 논문집
• /
• pp.79-79
• /
• 2017

Metallic biomaterials have been mainly used for the fabrication of medical devices for the replacement of hard tissue such as artificial hip joints, bone plates, and dental implants. Because they are very reliable on the viewpoint of mechanical performance. This trend is expected to continue. Especially, Ti and Ti alloys are bioinert. So, they do not chemically bond to the bone, whereas they physically bond with bone tissue. For their poor surface biocompatibility, the surface of Ti alloys has to be modified to improve the surface osteoinductivity. Recently, ceramic-like coatings on titanium, produced by plasma electrolytic oxidation (PEO), have been developed with calciumand phosphorus-enriched surfaces. A lso included the influences of coatings, which can accelerate healing and cell integration, as well as improve tribological properties. However, the adhesions of these coatings to the Ti surface need to be improved for clinical use. Particularly Silicon (Si) has been found to be essential for normal bone, cartilage growth and development. This hydroxyapatite, modified with the inclusion of small concentrations of silicon has been demonstrating to improve the osteoblast proliferation and the bone extracellular matrix production. Strontium-containing hydroxyapatite (Sr-HA) was designed as a filling material to improve the biocompatibility of bone cement. In vitro, the presence of strontium in the coating enhances osteoblast activity and differentiation, whereas it inhibits osteoclast production and proliferation. The objective of this work was to study Morphology of bone-like apatite formation on Sr and Si-doped hydroxyapatite surface of Ti-6Al-4V alloy after plasma electrolytic oxidation. Anodized alloys was prepared at 270V~300V voltages with various concentrations of Si and Sr ions. Bone-like apatite formation was carried out in SBF solution. The morphology of PEO, phase and composition of oxide surface of Ti-6Al-4V alloys were examined by FE-SEM, EDS, and XRD.

• Biomolecules & Therapeutics
• /
• 제28권4호
• /
• pp.370-379
• /
• 2020

Econazole, a potent broad-spectrum antifungal agent and a Ca²⁺ channel antagonist, induces cytotoxicity in leukemia cells and is used for the treatment of skin infections. However, little is known about its cytotoxic effects on solid tumor cells. Here, we investigated the molecular mechanism underlying econazole-induced toxicity in vitro and evaluated its regulatory effect on the metastasis of gastric cancer cells. Using the gastric cancer cell lines AGS and SNU1 expressing wild-type p53 we demonstrated that econazole could significantly reduce cell viability and colony-forming (tumorigenesis) ability. Econazole induced G0/G1 phase arrest, promoted apoptosis, and effectively blocked proliferation- and survival-related signal transduction pathways in gastric cancer cells. In addition, econazole inhibited the secretion of matrix metalloproteinase- 2 (MMP-2) and MMP-9, which degrade the extracellular matrix and basement membrane. Econazole also effectively inhibited the metastasis of gastric cancer cells, as confirmed from cell invasion and wound healing assays. The protein level of p53 was significantly elevated after econazole treatment of AGS and SNU1 cells. However, apoptosis was blocked in econazole-treated cells exposed to a p53-specific small-interfering RNA to eliminate p53 expression. These results provide evidence that econazole could be repurposed to induce gastric cancer cell death and inhibit cancer invasion.

• 한국분말재료학회지
• /
• 제19권4호
• /
• pp.253-258
• /
• 2012

The characteristics of $Al_2TiO_5$ ceramics were influenced by the additives and the heat treatment that controls the microcrack behavior at grain boundaries. The effect of additives on $Al_2TiO_5$ ceramics were investigated in terms of mechanical properties and thermal expansion at high temperature. The $Al_2TiO_5$ were synthesized at $1500^{\circ}C$, $1550^{\circ}C$ and $1600^{\circ}C$ for 2h by reaction sintering. The formation of $Al_2TiO_5$ phase was increased by additives that enhanced the volume of the microcrack that can lead to low thermal expansion. The mechanical properties of the stabilized $Al_2TiO_5$ ceramics were increased remarkably at $1100^{\circ}C$, $1200^{\circ}C$ and $1300^{\circ}C$ due to the oneset of mechanical healing of grain-bondary microcracks at a high temperature. The amount of microcrack was decreased at lower sintering temperature that causes the increase of mechanical properties at high temperature.

• 약학회지
• /
• 제55권1호
• /
• pp.1-10
• /
• 2011

Mastic is a bleed resin formed in pistacia lentiscus tree extract form the anacatdiaceae family. Mastic is used as a food ingredient in the Mediteraanean resin, and has been used by local inhabitants as a traditional medicine for relief of upper abdominal discomfort, dyspepsiaand peptic ulcer. Clinically, mastic has been effective in the treatment of benign gastric and duodenal, ulcers, giving symptomatic relief and endoscopically proven healing. In this study, to enhance activiteies of poorly water soluble Mastic with oils, surfactants and cosurfactants and then the mixure was microemulsified in aqueous media under condition of gentle agitation and digestive motility that would be encountered in the gastrointestinal tract. Formulation development and screening were based on phase diagrams and characteristics of resultant microemulsion. For optimum mastic formulation, microemulsions with various ratio (w/w%) of mastics, oils, surfactants and cosurfactants were prepared and their solubility was evaluated by monitoring particles size in their buffer through visual asessment and electrophoretic light scattering spectrophotomerter (ELS). In vitro activity of self microemulsified mastic (SME mastic) was determined by minimum ingibition concentration (MIC) test against a panel of Helicobacter pylori (H. pylori) clinical strains. Additionally, in vivo activity of SME masitc was investigated us mouse infected by CH275 of H. pylori. The mean diameter of SME mastic was less then 100 nm in water and SME mastic was showed similar antiboisis effect compared to tometronidazole, clarithromycin and omeproazole. Consequently, SME mastic would be effective system to exterminate H. pylori. If mastic were dose with combined treatment, mastic might augur well for effect of H. pylori eradication as good remedy.

• Journal of Periodontal and Implant Science
• /
• 제40권5호
• /
• pp.244-248
• /
• 2010

Purpose: The purpose of this study was to radiographically evaluate marginal bony changes in relation to different vertical positions of dental implants. Methods: Two hundred implants placed in 107 patients were examined. The implants were classified by the vertical positions of the fixture-abutment connection (microgap): 'bone level,' 'above bone level,' or 'below bone level.' Marginal bone levels were examined in the radiographs taken immediately after fixture insertion, immediately after second-stage surgery, 6 months after prosthesis insertion, and 1 year after prosthesis insertion. Radiographic evaluation was carried out by measuring the distance between the microgap and the most coronal bone-to-implant contact (BIC). Results: Immediately after fixture insertion, the distance between the microgap and most coronal BIC was $0.06{\pm}0.68\;mm$; at second surgery, $0.43{\pm}0.83\;mm$; 6 months after loading, $1.36{\pm}0.56\;mm$; and 1 year after loading, $1.53{\pm}0.51\;mm$ ($mean{\pm}SD$). All bony changes were statistically significant but the difference between the second surgery and the 6-month loading was greater than between other periods. In the 'below bone level' group, the marginal bony change between fixture insertion and 1 year after loading was about 2.25 mm, and in the 'bone level' group, 1.47 mm, and in 'above bone level' group, 0.89 mm. Therefore, the marginal bony change was smaller than other groups in the 'above bone level' group and larger than other groups in the 'below bone level' group. Conclusions: Our results demonstrated that marginal bony changes occur during the early phase of healing after implant placement. These changes are dependent on the vertical positions of implants.

• 미생물학회지
• /
• 제55권2호
• /
• pp.87-102
• /
• 2019

대부분의 만성창상(chronic wounds)은 생물막으로 인해 상처 치유시 염증단계를 지속시킨다. 생물막은 항생제(antibiotics)에 대한 저항성을 가지며 침투력을 저하시키고 살균제(biocides)에 대한 내성을 지니며 국소면역반응을 약화시킨다. 또한 생물막은 주변의 조직에 단단히 붙어 있어 제거하는 작업이 매우 어렵다. 그러므로 주변 조직을 손상시키지 않으면서 단단한 생물막을 제거하는 전략은 매우 중요하다. 그 중에 하나가 분산기작을 이용한 생물막의 해체이며 지금까지 많은 연구가 수행되어 왔다. 본 고찰논문에서는 특별히 화학주성, 파지요법, 다당류, 다양한 효소(당분해효소, 단백질분해효소, DNA 분해효소), 계면활성제, 분산신호, 자기유도인자, 조절인자, 억제제 등이 소개되었으며 더 나아가 항생제 치료 및 다른 치료와의 병행을 통한 병합요법도 소개되었다. 앞으로 본 논문에서 제시된 생물막의 분산기작의 지식을 이용하여 만성 창상 감염치료의 가능성이 더 높아지길 기대한다.

• Journal of Periodontal and Implant Science
• /
• 제52권6호
• /
• pp.479-495
• /
• 2022

Purpose: Rodent models have emerged as an alternative to established larger animal models for peri-implantitis research. However, the construct validity of rodent models is controversial due to a lack of consensus regarding their histological, morphological, and biochemical characteristics. This systematic review sought to validate rodent models by characterizing their morphological changes, particularly marginal bone loss (MBL), a hallmark of peri-implantitis. Methods: This review was conducted following the Preferred Reporting Items for Systematic Reviews and Meta-Analysis (PRISMA) guidelines. A literature search was performed electronically using MEDLINE (PubMed), and Embase, identifying pre-clinical studies reporting MBL after experimental peri-implantitis induction in rodents. Each study's risk of bias was assessed using the Systematic Review Center for Laboratory animal Experimentation (SYRCLE) risk of bias tool. A meta-analysis was performed for the difference in MBL, comparing healthy implants to those with experimental peri-implantitis. Results: Of the 1,014 unique records retrieved, 23 studies that met the eligibility criteria were included. Peri-implantitis was induced using 4 methods: ligatures, lipopolysaccharide, microbial infection, and titanium particles. Studies presented high to unclear risks of bias. During the osseointegration phase, 11.6% and 6.4%-11.3% of implants inserted in mice and rats, respectively, had failed to osseointegrate. Twelve studies were included in the meta-analysis of the linear MBL measured using micro-computed tomography. Following experimental peri-implantitis, the MBL was estimated to be 0.25 mm (95% confidence interval [CI], 0.14-0.36 mm) in mice and 0.26 mm (95% CI, 0.19-0.34 mm) in rats. The resulting peri-implant MBL was circumferential, consisting of supra- and infrabony components. Conclusions: Experimental peri-implantitis in rodent models results in circumferential MBL, with morphology consistent with the clinical presentation of peri-implantitis. While rodent models are promising, there is still a need to further characterize their healing potentials, standardize experiment protocols, and improve the reporting of results and methodology.

• Journal of Korean Dental Science
• /
• 제16권2호
• /
• pp.172-181
• /
• 2023

Purpose: To investigate the effect of epidermal growth factor (EGF) with collagen matrix (CM) for increasing gingival thickness. Materials and Methods: In five mongrel dogs, bilateral gingival defects were surgically made on the maxillary canines. After two months, either a subepithelial connective tissue graft (group SCTG) or CM with EGF (0.1 ug/ml, group EGF) was grafted, and the flap was coronally positioned to cover the graft materials. The animals were sacrificed after three months. Intraoral scanning was performed for soft tissue analysis. Histologic and histomorphometric analyses were performed. Result: Two animals exhibited wound dehiscence during the healing phase, leaving three for analysis. No statistically significant difference was found in soft tissue changes (P>0.05). The level of gingival margin (GM) increased in both groups (1.02±0.74 mm in group SCTG vs. 1.24±0.83 mm in group EGF). Linear increases at the GM pre-augmentation in the soft tissue profile were 1.08±0.58 mm in group SCTG and 0.96±0.73 mm in group EGF. Histomorphometric parameters (keratinized tissue height, tissue thickness, and rete peg density) were not significantly different between the groups (P>0.05). Conclusion: EGF loaded onto CM led to comparable gingival phenotype enhancement to SCTG.