Browse > Article
http://dx.doi.org/10.12989/cac.2018.21.1.067

The effective properties of saturated concrete healed by EDM with the ITZs  

Chen, Qing (Key Laboratory of Advanced Civil Engineering Materials of Ministry of Education, Tongji University)
Jiang, Zhengwu (Key Laboratory of Advanced Civil Engineering Materials of Ministry of Education, Tongji University)
Zhu, Hehua (State Key Laboratory for Disaster Reduction in Civil Engineering, Tongji University)
Ju, J.W. (Department of Civil and Environmental Engineering, University of California)
Yan, Zhiguo (State Key Laboratory for Disaster Reduction in Civil Engineering, Tongji University)
Li, Haoxin (Key Laboratory of Advanced Civil Engineering Materials of Ministry of Education, Tongji University)
Publication Information
Computers and Concrete / v.21, no.1, 2018 , pp. 67-74 More about this Journal
Abstract
A differential scheme based micromechanical framework is proposed to obtain the effective properties of the saturated concrete repaired by the electrochemical deposition method (EDM) considering the interfacial transition zone (ITZ) effects. The constituents of the repaired concrete are treated as different phases, consisting of (micro-)cracks, (micro-)voids and (micro-)pores (occupied by water), deposition products, intrinsic concrete made up by the three traditional solid phases (i.e., mortar, coarse aggregates and their interfaces) and the ITZs. By incorporating the composite sphere assemblage (CSA) model and the differential approach, a new multilevel homogenization scheme is utilized to quantitatively estimate the mechanical performance of the repaired concrete with the ITZs. The CSA model is modified to obtain the effective properties of the equivalent particle, which is a three-phase composite made up of the water, deposition products and the ITZs. The differential scheme is employed to reach the equivalent composite of the concrete repaired by EDM considering the ITZ effects. Moreover, modification procedures considering the ITZ effects are presented to attain the properties of the repaired concrete in the dry state. Results in this study are compared with those of the existing models and the experimental data. It is found that the predictions herein agree better with the experimental data than the previous models.
Keywords
electrochemical deposition; healing; saturated concrete; interfacial transition zone; effective properties; differential scheme; micromechanical framework;
Citations & Related Records
Times Cited By KSCI : 3  (Citation Analysis)
연도 인용수 순위
1 Chang, J.J., Yeih, W.C., Hsu, H.M. and Huang, N.M. (2009), "Performance evaluation of using electrochemical deposition as a repair method for reinforced concrete beams", Struct. Longev., 1(2), 75-93.
2 Chen, Q., Jiang, Z.W., Yang, Z.H., Zhu, H.H., Ju, J.W., Yan, Z.G. and Wang, Y.Q. (2016a), "Differential-scheme based micromechanical framework for saturated concrete repaired by the electrochemical deposition method", Mater. Struct., 49(12), 5183-5193.   DOI
3 Chen, Q., Mousavi Nezhad, M., Fisher, Q. and Zhu, H.H. (2016b), "Multi-scale approach for modeling the transversely isotropic elastic properties of shale considering multi-inclusions and interfacial transition zone", Int. J. Rock Mech. Min., 84, 95-104.
4 Chen, Q., Zhu, H.H., Ju, J.W., Guo, F., Wang, L.B., Yan, Z.G., Deng, T. and Zhou, S. (2015c), "A stochastic micromechanical model for multiphase composite containing spherical inhomogeneities", Acta Mech., 226(6), 1861-1880.   DOI
5 Chen, Q., Zhu, H.H., Ju, J.W., Jiang, Z.W., Yan, Z.G. and Li, H.X. (2017), "Stochastic micromechanical predictions for the effective properties of concrete considering the interfacial transition zone effects", Int. J. Damage Mech., DOI: 10.1177/1056789517728501.   DOI
6 Chen, Q., Zhu, H.H., Yan, Z.G., Deng, T. and Zhou, S. (2015a), "Micro-scale description of the saturated concrete repaired by electrochemical deposition method based on Mori-Tanaka method", J. Build Struct., 36(1), 98-103.
7 Chen, Q., Zhu, H.H., Yan, Z.G., Ju, J.W., Deng, T. and Zhou, S. (2015b), "Micro-scale description of the saturated concrete repaired by electrochemical deposition method based on self-consistent method", Chin. J. Theor. Appl. Mech., 47(2), 367-371.
8 Yokoda, M. and Fukute, T. (1992), "Rehabilitation and protection of marine concrete structure using electrodeposition method", Proceedings of the International RILEM/CSIRO/ACRA Conference on Rehabilitation of Concrete Structures, RILEM, Melbourne.
9 Yoo, D.Y. and Banthia, N. (2015), "Numerical simulation on structural behavior of UHPFRC beams with steel and GFRP bars", Comput. Concrete, 16(5), 759-774.   DOI
10 Zhu, H.H., Chen, Q., Ju, J.W., Yan, Z.G., Guo, F., Wang, Y.Q., Jiang, Z.W., Zhou, S. and Wu, B. (2015), "Maximum entropy based stochastic micromechanical model for two-phase composite considering the inter-particle interaction effect", Acta Mech., 226(9), 3069-3084.   DOI
11 Zhu, H.H., Chen, Q., Yan, Z.G., Ju, J.W. and Zhou, S. (2014), "Micromechanical model for saturated concrete repaired by electrochemical deposition method", Mater. Struct., 47, 1067-1082.   DOI
12 Jiang, Z.W, Sun, Z.P. and Wang, P.M. (2006), "Internal relative humidity distribution in cement paste due to moisture diffusion and self-desiccation", Cement Concrete Res., 36(2), 320-325.   DOI
13 Chen, Q., Zhu, H.H., Yan, Z.G., Ju, J.W., Jiang, Z.W. and Wang, Y.Q. (2016c), "A multiphase micromechanical model for hybrid fiber reinforced concrete considering the aggregate and ITZ effects", Constr. Build. Mater., 114, 839-850.   DOI
14 Chu, H.Q. and Jiang, L.H. (2009), "Correlation analysis between concrete parameters and electrodeposition effect based on grey theory", J. Wuhan Univ. Technol., 31(7), 22-26.
15 Gal, E. and Kryvoruk, R. (2011), "Fiber reinforced concrete properties-a multiscale approach", Comput. Concrete, 8(5), 525-539.   DOI
16 Hashin, Z. (1962), "The elastic moduli of heterogeneous materials", J. Appl. Mech., 29, 143-150.   DOI
17 Jiang, Z.W, Sun, Z.P. and Wang, P.M. (2005), "Autogenous relative humidity change and autogenous shrinkage of high-performance cement pastes", Cement Concrete Res., 35(8), 1539-1545   DOI
18 Jiang, Z.W., Li, W.T. and Yuan, Z.C. (2015), "Influence of mineral additives and environmental conditions on the selfhealing capabilities of cementitious materials", Cement Concrete Compos., 57, 116-127.   DOI
19 Jiang, Z.W., Li, W.T., Deng, Z.L. and Yan, Z.G. (2013), "Experimental investigation of the factors affecting accuracy and resolution of the pore structure of cement-based materials by thermoporometry", J. Zhejiang Univ-Sci., 14(10), 720-730.   DOI
20 Jiang, Z.W., Xing, F., Sun, Z.P. and Wang, P.M. (2008), "Healing effectiveness of cracks rehabilitation in reinforced concrete using electrodeposition method", J. Wuhan Univ. Technol., 23(6), 917-922.   DOI
21 Ju, J.W. and Chen, T.M. (1994a), "Micromechanics and effective moduli of elastic composites containing randomly dispersed ellipsoidal inhomogeneities", Acta Mech., 103, 103-121.   DOI
22 Ju, J.W. and Chen, T.M. (1994b), "Effective elastic moduli of two-phase composites containing randomly dispersed spherical inhomogeneities", Acta Mech., 103, 123-144.   DOI
23 Ju, J.W. and Yanase, K. (2010), "Micromechanics and effective elastic moduli of particle-reinforced composites with near-field particle interactions", Acta Mech., 215(1), 135-153.   DOI
24 Ju, J.W. and Lee, X. (1991), "Micromechanical damage models for brittle solids. Part I: tensile loadings", J. Eng. Mech., 117, 1495-1514.   DOI
25 Ju, J.W. and Sun, L.Z. (1999), "A novel formulation for the exterior-point Eshelby's tensor of an ellipsoidal inclusion", J. Appl. Mech-T., ASME, 66(2), 570-574.   DOI
26 Ju, J.W. and Sun, L.Z. (2001), "Effective elastoplastic behavior of metal matrix composites containing randomly located aligned spheroidal inhomogeneities. Part I: micromechanics-based formulation", Int. J. Solid. Struct., 38(2), 183-201.   DOI
27 Ju, J.W. and Yanase, K. (2011), "Micromechanical effective elastic moduli of continuous fiber-reinforced composites with near-field fiber interactions", Acta Mech., 216(1), 87-103.   DOI
28 McLaughlin, R. (1977), "A study of the differential scheme for composite materials", Int. J. Eng. Sci., 15, 237-244.   DOI
29 Ju, J.W. and Zhang, X.D. (1998), "Micromechanics and effective transverse elastic moduli of composites with randomly located aligned circular fibers", Int. J. Solid. Struct., 35(9-10), 941-960.   DOI
30 Li, G.Q., Zhao, Y. and Pang, S.S. (1999), "Four-phase sphere modeling of effective bulk modulus of concrete", Cement Concrete Res., 29, 839-845.   DOI
31 Mousavi Nezhad, M., Zhu, H.H., Ju, J.W. and Chen, Q. (2016), "A simplified multiscale damage model for the transversely isotropic shale rocks under tensile loading", Int. J. Damage Mech., 25(5), 705-726.   DOI
32 Mura, T. (1987), Micromechanics of Defects in Solids, Martinus Nijhoff Publishers, the Netherlands.
33 Otsuki, N., Hisada, M., Ryu, J.S. and Banshoya, E.J. (1999), "Rehabilition of concrete cracks by electrodeposition", Concrete Int., 21(3), 58-62.
34 Nguyen, N.B., Giraud, A. and Grgic, D. (2011), "A composite sphere assemblage model for porous oolitic rocks", Int. J. Rock Mech. Min., 48, 909-921.   DOI
35 Norris, A.N. (1985), "A differential scheme for the effective modulus of composites", Mech. Mater., 4, 1-16.   DOI
36 Otsuki, N. and Ryu, J.S. (2001), "Use of electrodeposition for repair of concrete with shrinkage cracks", J. Mater. Civil Eng., 13(2), 136-142.   DOI
37 Ryu, J.S. (2003b), "Influence of crack width, cover depth, water cement ratio and temperature on the formation of electrodeposition on the concrete surface", Mag. Concrete Res., 55(1), 35-40.   DOI
38 Pichler, C. and Lackner, R. (2008), "A multiscale creep model as basis for simulation of early-age concrete behavior", Comput. Concrete, 5(4), 295-328.   DOI
39 Qu, J.M. and Cherkaoui, M. (2006), Fundamentals of Micromechanics of Solids, John Wiley & Sons, Inc., Hoboken, New Jersey.
40 Ryu, J.S. (2003a), "New waterproofing technique for leaking concrete", J. Mater. Sci. Lett., 22, 1023-1025.   DOI
41 Ryu, J.S. and Otsuki, N. (2002), "Crack closure of reinforced concrete by electro deposition technique", Cement Concrete Res., 32(1), 159-264.   DOI
42 Ryu, J.S. and Otsuki, N. (2005), "Experimental study on repair of concrete structural members by electrochemical method", Scripta Materialia, 52, 1123-1127.   DOI
43 Sasaki, H. and Yokoda, M. (1992), "Repair method of marine reinforced concrete by electro deposition technique", Proceedings of the Annual Conference of Japanese Concrete Institute, 849-854.
44 Sun, L.Z. and Ju, J.W. (2001), "Effective elastoplastic behavior of metal matrix composites containing randomly located aligned spheroidal inhomogeneities. Part II: applications", Int. J. Solid. Struct., 38(2), 203-225.   DOI
45 Chen, Q. (2014), "The stochastic micromechanical models of the multiphase materials and their applications for the concrete repaired by electrochemical deposition method", Ph.D. Dissertation Tongji Univ., Shanghai.
46 Berryman, J.G. (1980), "Long-wave propagation in composite elastic media II. Ellipsoidal inclusion", J. Acoust. Soc. Am., 68(6), 1820-1831.   DOI
47 Smith, J.C. (1974), "Correction and extension of Van der Poel's method for calculating the shear modulus of a particulate composite", J. Res. Nat. Bureau Stand. A. Phys. Chem., 78(3), 355-361.
48 Smith, J.C. (1975), "Simplification of Van der Poel's formula for the shear modulus of a particulate composite", J. Res. Nat. Bureau Stand. A. Phys. Chem., 79A(2), 419-423.   DOI
49 Smith, J.C. (1976), "Experimental values for the elastic constants of a particulate-filled glassy polymer", J. Res. NBS, 80A, 45-49.   DOI
50 Sun, L.Z. and Ju, J.W. (2004), "Elastoplastic modeling of metal matrix composites containing randomly located and oriented spheroidal particles", J. Appl. Mech-T., ASME, 71, 774-785.   DOI
51 Wang, H.L. and Li, Q.B. (2007), "Prediction of elastic modulus and Poisson's ratio for unsaturated concrete", Int. J. Solid. Struct., 44, 1370-1379.   DOI
52 Yaman, I.O., Hearn, N. and Aktan, H.M. (2002), "Active and non-active porosity in concrete part I: experimental evidence", Mater. Struct., 35(3), 102-109.   DOI
53 Yan, Z.G., Chen, Q., Zhu, H.H., Ju, J.W., Zhou, S. and Jiang, Z.W. (2013), "A multiphase micromechanical model for unsaturated concrete repaired by electrochemical deposition method", Int. J. Solid. Struct., 50(24), 3875-3885.   DOI
54 Yanase, K. and Ju, J.W. (2012), "Effective elastic moduli of spherical particle reinforced composites containing imperfect interfaces", Int. J. Damage Mech., 21(1), 97-127.   DOI