• Journal of the Korean Institute of Rural Architecture
• /
• v.23 no.1
• /
• pp.43-50
• /
• 2021

This study aims to investigate and analyze the utilization perception of members of head families based on a survey on the history, folklore, architectural resources of head families. In order to identify the direction of utilization of Jeonnam head family resources, tangible and intangible resources, and spaces and places to contain programs were researched. The results of the study were summarized as follows. 1) Head family houses in Jeonnam could be categorized into head families that preserved the original form of head family houses, head families that preserved a part of head family houses, head families that newly built head family houses while the original forms thereof have disappeared, and relocated head families of which eldest grandsons no longer reside, where only the sites of the head family houses remain or relocated to a different place. 2) In the case of perception of members of head families on the utilization of head family resources, 27 head families consented to the utilization, 35 head families opposed to the utilization, and 6 head families were undecided on the utilization out of a total of 68 head families. 3) The results of investigating and analyzing the desired type of programs of each head family by categorizing the programs into lodging, food, meditation, education, and tourism, as many as four programs were desired, while some families desired 2 or 3 programs at the lowest, showing an overlapping characteristic.

• The korean journal of orthodontics
• /
• v.16 no.1
• /
• pp.71-84
• /
• 1986

The purpose of this study was to analyze the effect of orthopedic forces on the craniofacial complex utilizing the three kinds of the head gear. (high pull head gear, straight pull head gear, cervical pull head gear) For this study, the teeth and alveolar bone and palate were reproduced from birefringent materials and other parts of craniofacial complex were coated with birefringent material on the model. The effect of orthopedic forces on the craniofacial complex was analyzed by photoelastic method using transmission polariscope and reflection polariscope. The results were as follows. 1. The cervical pull head gear had the greatest tipping effect on the maxillary molars and high pull head gear had the least tipping effect. 2. In areas stressed, the cervical pull head gear stressed the greatest degree. 3. Only cervical pull head gear produced stress at the zygomaticofrontal suture and the posterior region of palate. 4. The straight pull head gear and high pull head gear produced stress at just inferior to the anterior nasal spine. 5. The cervical pull head gear and straight pull head gear produced tensile stress at the fronto-maxillary suture. 6. The pterygoid plates of the sphenoid bone, the zygomatic arches, the junction of the maxilla with the lacrimal and ethmoid bone, and the maxillary molars were affected by three types of head gear.

• Journal of the Korean Society of Physical Medicine
• /
• v.5 no.1
• /
• pp.1-6
• /
• 2010

Purpose : This research intended to find out the effects of scalenus medius muscle relaxed posture on the increase of head-neck rotation for general adults. Methods : This research was conducted on 30 subjects whose both sides head neck rotation angles are not the same and that agreed to participate in the experiment. In a posture of sitting erectly on a mat, both sides head neck rotation angles were measured with C-ROM equipment, and while supporting arm in direction opposite the side where head neck rotation limited and leaning over the body at 45 degree and neck at vertical condition against ground, head-neck rotation angles were measured each with C-ROM equipment. Results : The Head-Neck rotation angle on the side of limited head-neck rotation demonstrated more increase in scalenus medius relaxed posture than in erect sitting posture, showing significant difference statistically(p<0.05). The head-neck rotation angle on the side of non-limited Head-Neck rotation demonstrated more decrease in scalenus medius relaxed posture than in erect sitting posture, not showing any significant difference statistically (p>0.05). Conclusions : This posture may be used for preventing limit of head-neck rotation caused of scalenus medius muscle tension and increasing head-neck rotation.

• Journal of the Korean Home Economics Association
• /
• v.43 no.1 s.203
• /
• pp.105-113
• /
• 2005

The purpose of this study was to suggest a standard sizing system for college female students' head wears according to their head types. The subjects were 193 college women, of 20 to 25 years-old. The subjects were directly measured anthropometrically and indirectly analyzed photographically. In previous tudy (Lim, 2004), 3 clusters as their head types were categorized. the sizing system, which had frequencies more than $4\%$ was classified 6 cases, 7 cases and 9 cases, respectively, by head 3 types. 3 types of size system, which were 56-28-38, 56-30-38 and 57-28-38(Eds note: which of the measurements are head girth, surface length 1 and surface length 2), which were included in 3 clusters. Although head girths were as the same, head surface length was different in size. On the contrary, head surface length was same, head girth was different. The result will contribute to fitness of head wear fitness of consumer, and the amount of production.

• Corrosion Science and Technology
• /
• v.18 no.3
• /
• pp.92-101
• /
• 2019

This study investigates how rivet head height affects the corrosion performance of carbon fiber reinforced plastic (CFRP) to aluminum alloy self-piercing riveted joints. Specimens with two different head heights were prepared. A rivet head protruding out of the top CFRP laminate forms the proud head height while a rivet head penetrating into the top CFRP generates the flush head height. The salt spray test evaluated corrosion performance. The flush head joints suffered from severe corrosion on the rivet head. Thus, the tensile shear load of flush head joints was substantially reduced. Electrochemical corrosion tests investigated the corrosion mechanisms. The deeper indentation of the flush head height damaged the CFRP around the rivet head. The exposure of damaged fibers from the matrix increased the cathodic potential of local CFRP. The increased potential of damaged CFRP accelerated the galvanic corrosion of the rivet head. After the rivet head coating material corroded, a strong galvanic couple was formed between the rivet head base metal (boron steel) and the damaged CFRP, further accelerating the flush rivet head corrosion. The results of this study suggest that rivet head flushness should be avoided to enhance the corrosion performance of CFRP to aluminum alloy self-piercing riveted joints.

• Journal of Magnetics
• /
• v.8 no.4
• /
• pp.164-168
• /
• 2003

In high density recording system, the recording head field on a medium should be focused in small bit area and should have a sufficient value to overcome the medium coercivity, which resulted in head saturation. In this paper, an efficient method to access the head field and field gradient considering head saturation is presented. The magnetic vector potential on the head surface is pre-calculated considering head saturation in several cases and accumulated into database. The head field on the recording media is easily produced solving Laplace equation using accessed magnetic vector potential boundaries. The computed head field is compared with a quantified magnetic force microscopy measurement.

• PNF and Movement
• /
• v.17 no.3
• /
• pp.401-409
• /
• 2019

Purpose: This study investigated the muscular activity of abdominal muscles during a variety of plank exercises following changes in the leg and head positions. Methods: Thirty healthy individuals participated in this study. They performed six variations of plank exercises, including three changes in head position and two changes in leg position. Each plank was defined as head neutral-leg neutral, head up-leg neutral, head down-leg neutral, head neutral-leg wide, head up-leg wide, and head down-leg wide. During the plank excises, the muscle activities of the rectus abdominis, internal oblique, erector spinae, and upper trapezius were measured. Results: The head down position significantly increased the rectus abdominis activity compared to other head positions (p<0.05). On the other hand, the upper trapezius muscle activity was significantly higher with the head up position compared to other head positions (p<0.05). Regardless of head positions, both the rectus abdominis and internal oblique muscles were significantly activated with leg wide position compared to the leg neutral position (p<0.05). Conclusion: Head and leg positions could change the muscular activities of abdominal muscles during plank exercises. For example, the head down position is effective for activating the rectus abdominis while the leg wide position could be advantageous for enhancing the internal oblique and rectus abdominis.

• Korean Journal of Human Ecology
• /
• v.12 no.4
• /
• pp.571-578
• /
• 2003

The purpose of this research was to provide basic information for enhancing sizing suitability in terms of the need for appropriate fit in head gear. The method for this research was to survey about sizing system of head gear, basic measure part, repair service. The subject of this study were 15 head gear companies. The results of this research were as follows : 1. In the sex target analysis according to company type, most of fashion brand companies were producing woman's head gear. In case of the company to produce man's head gear, sizes appeared variously. On the other hand, the sports brand companies were producing unisex head gear and safety helmet companies were producing man's one. 2. The number of size of head gear manufacturing companies were under 3 sizing system. This means that the sizing system of current head gear manufacturing company isn't various. 3. While the measuring part using currently in the company was head girth, one to be considered necessary for manufacturing of head gear except the head girth was head height.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.29 no.5 s.142
• /
• pp.737-744
• /
• 2005

This study was aimed to provide the measurement data and shape classification of the head of the Korean male children for the headwear sizing systems. Five hundred twenty male children, aged nine to twelve years, participated f3r this study. The 17 regions on the head and height, weight of the subjects were directly measured by the expert experimenters. Factor analysis, cluster analysis, GLM analysis and Tukey HSD test were performed using these data. Through factor analysis, low factors were extracted upon factor scores and those factors comprised $69.76\%$ for the total variances. Three clusters as their head shape were categorized using four factor scores by cluster analysis. Type 1 was characterized by the widest width and Bitragion arc, shortest head length. Type 2 had the longest head length and the widest side width and the highest head length and head circumference. Type 3 was characterized by the smallest head circumstance, head width and side width, and medium head length.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.24 no.5
• /
• pp.588-595
• /
• 2016

This paper is a study on head bolts that are used in A/C compressors to reduce production cost and solve leak problems on the head bolt seat area that causes massive intermittent malfunctioning during production. In this study, the pre-heat treated steel, which was used as a material in the head bolt, eliminated the heat treatment process after forging. The pre-heat treated steel head bolts, which have 10 % lower tensile strength than the conventional SCM 435 head bolts, were selected after considering the results of creeping rupture properties, axial force, and stress concentration per tensile strength variation. Then, the performance test and the durability test with the A/C compressor that was assembled with the pre-heat treated steel head bolts were performed and verified. Based on the results, the pre-heat treated steel head bolts developed in this study saved 7.3 % in production cost by eliminating the heat treatment process and the logistics process. Furthermore, the leak problem on the head bolt seat area in the A/C compressor was addressed significantly on the mass production assembly line.