Browse > Article
http://dx.doi.org/10.7467/KSAE.2016.24.5.588

A Study on Development of Pre-heat Treated Steel Head Bolt for Swashplate Type Compressor of Car Air-conditioner  

Kim, Youngshin (Hanon Design Cost Innovation Team, Hanon Systems)
Kim, Hokyoum (Development Division, Sungwon Ind.)
Hwang, Seungyong (Mechanical Compressor Team, Hanon Systems)
Kim, Youngman (Development Division, Sungwon Ind.)
Publication Information
Transactions of the Korean Society of Automotive Engineers / v.24, no.5, 2016 , pp. 588-595 More about this Journal
Abstract
This paper is a study on head bolts that are used in A/C compressors to reduce production cost and solve leak problems on the head bolt seat area that causes massive intermittent malfunctioning during production. In this study, the pre-heat treated steel, which was used as a material in the head bolt, eliminated the heat treatment process after forging. The pre-heat treated steel head bolts, which have 10 % lower tensile strength than the conventional SCM 435 head bolts, were selected after considering the results of creeping rupture properties, axial force, and stress concentration per tensile strength variation. Then, the performance test and the durability test with the A/C compressor that was assembled with the pre-heat treated steel head bolts were performed and verified. Based on the results, the pre-heat treated steel head bolts developed in this study saved 7.3 % in production cost by eliminating the heat treatment process and the logistics process. Furthermore, the leak problem on the head bolt seat area in the A/C compressor was addressed significantly on the mass production assembly line.
Keywords
Air-conditioner; Compressor; Head bolt; Pre-heat treated steel; Tensile strength;
Citations & Related Records
Times Cited By KSCI : 3  (Citation Analysis)
연도 인용수 순위
1 K. E. Lee, D. W. Kang and G. U. Lim, "The Effect of Bolt Shape on the Fatigue Property," Conference of KSME, pp.1560-1563, 2013.
2 C. K. Song, S. D. Lee and Y. J. Cho, "An Experimental Study of Friction Coefficient Variation Due to Vibration for Bolted Joint," Transactions of the KSTLE, Vol.23, No.2, pp.61-65, 2007.
3 J. H. Jung, J. B. Kim, H. K. Lee, M. G. Jang and G. J. Na, "An Investigation into the Effect of Serration Shape on Bolt Release Torque," Conference of KSPE, pp.1215-1216, 2015.
4 J. H. Lee, T. H. Ha, Y. J. Kim, D. H. Kim and C. H. Lee, "Study on Stiffness of Bolt Joints According to Pre-load," Conference of KSPE, pp.559-560, 2009.
5 J. W. Park, S. H. Lee and J. M. Kim, "A Study on Development of Low Carbon Boron Steels for Automotive Bolts," Transactions of KSAE, Vol.17, No.6, pp.136-141, 2009.
6 J. T. Park, J. G. Eum, J. H. Kim, D. J. Youn and M. S. Joun, "Study on Mechanical Behavior of a Pre-Heat Treated Steel of ESW95," Conference of KSTP, pp.439-443, 2008.
7 Y. S. Kim, H. K. Kim, S. Y. Hwang and Y. M. Kim, "A Study on Developing of Energy Saver Wire Head Bolt for Swashplate Type Compressor of Car Air-conditioner," KSAE Spring Conference Proceedings, pp.393-399, 2016.
8 Y. S. Kim, S. Y. Yoo and S. G. Na, "Study of Compressor-Performance Improvement in Automotive Air-Conditioning System," Transactions of the KSME, Vol. 39, No.9, pp.713-718, 2015.