• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.27 no.1
• /
• pp.28-35
• /
• 2017

Recently, conventional hydraulic car lift systems face the technological limitations due to a lack of height control. The demand for height controllability is required in many tasks such as wheel alignment, and requires compensation for the structural deformation of the lift caused by irregular load distribution. In order to resolve this limitation of the conventional car lift, in this work, a new type of a hydraulic vehicle lift using a magneto-rheological (MR) valve system is proposed and analyzed. Firstly, the dynamic model of vehicle lift is formulated to evaluate control performance; subsequently, an MR valve is designed to obtain the desired pressure drop required in the car lift. Next, a proportional-integral-derivative (PID) controller is formulated to achieve accurate control of the lifting height and then computer simulations are undertaken to show accurate height control performances of the proposed new car lift system.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2002.05a
• /
• pp.53-57
• /
• 2002

Quality evaluation must be more developed in order to offer the sufficient information for producer, distribution centers buyer, consumer. There are many parameters which influence the rice quality and cooked rice. It is difficult to evaluate the quality of rice and cooked rice by only some parameters. In the case of rice quality evaluation in Korea, physicochemical inspection is performed by examining the minimum and maximum limits of brown rice recovery, moisture content, damaged kernel, and colored kernel as inspection standard. Marketing standard of rice defines the limits of perfect, white core and belly, colored, damaged kernels, and broken rice, classifying into special, excellent, and normal grades. As a research direction for the development of rice quality evaluation, establishment as parts of technical field, must be further developed as follows : more detailed measure of characters, search of unknown taste-related components, creation and grade classification of quality evaluation factors at each management stages of treatment after harvesting, evaluation as food material as well as cooking rice, method development for simple evaluation and establishment of equation for palatability. In the side of policy, the following concerns must be conducted: price discrimination in conformity to rice cultivar and grade under the basis of qualify evaluation method developed, fixation of head rice branding, and introduction of low temperature circulation.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.60 no.2
• /
• pp.103-110
• /
• 2018

Most of the intake facilities of small agricultural reservoirs are conduits and they are regarded as serious defects due to the structural weakness that penetrates the body of the dam, and countermeasures are needed. This study suggests the application method of siphon type water intake facility by hydraulic model test and physical scale model test of siphon type water intake facility which has high safety and easy maintenance. Experimental results show that sufficient flow rate can be secured for the purpose of intaking water according to the differential head between the reservoir and the discharge part, and the flow rate can be controlled by the valve. The negative pressure was -31.5 kPa, and vibration and noise did not occur during the operation of the siphon. The maximum flow velocity in the discharge outlet was 1.11 m/s which meets the criterion for irrigation canals. Therefore, scour risk would be very low. As a result of the inflow distribution experiment, even if the inflow part is separated by only about 0.8 m, the flow velocity is remarkably decreased, so that the clogging by debris would not appear. When the pump was operated only once for the first time and the inside of the siphon was filled with water, continuous operation was possible by only valve operation. The results of this study are expected to be used for the design guidelines of the water intake facilities and improve safety and maintenance convenience of agricultural reservoirs.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.48 no.4
• /
• pp.474-482
• /
• 2015

This study aims to investigate the patterns and incidence rates of morphological deformities during artificial fingerling production of blackhead seabream (BSB, Acanthopagrus schlegeli) juveniles by visual and soft X-ray observations of BSB juveniles (n=881) collected from four industrial hatcheries. Using both methods, we observed seven types of external deformity ($11.2{\pm}4.4%$) and eight types of skeletal deformity ($53.4{\pm}5.1%$). Lordosis occurred in all hatcheries with the highest frequency and the mean frequency was $13.1{\pm}4.4%$ (24.5% in total abnormal) by soft X-ray. Although they had a similar standard length (SL), juveniles with lordosis had a significantly lower condition factor and body weight than normally developed juveniles (P<0.05); normal distribution curves of histogram of body proportions, i.e., body height (BH)/head length (HL) and trunk (=SL-HL)/BH, indicated differences between normally developed juveniles and those with lordosis. In addition, 59% of juveniles with lordosis had vertebral curvature of less than $20^{\circ}$, generally at the $17^{th}$ vertebrae. It is expected that the above results will be used as basic data necessary for determining the cause of lordosis and for developing techniques to prevent this symptom in the fingering production industry of BSB juveniles.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.12
• /
• pp.2971-2984
• /
• 1997

In this paper, we propose an efficient video block Placement scheme that utilize the current disk product that has MZR disk characteristic and users' skewed access pattern on VOD. Also, we evaluate its performance through simulation and modeling of VOD server. The basic placement rule is to place on MZR disks by LP, SHP methods according to the Zipf distribution of popularity. To verify the proposed scheme, we examined its performance on workstation with 2 MZR disks under varied skewed factors. The proposed placement scheme showed better response time than the random method. To extend proposed placement scheme to disk group, we analyzed the theoretical maximum numbers of concurrent users and the required buffer size per user. For performance parameters for the proposed scheme, we considered the disk head scheduling methods, the placement methods and the striping unit. The result of experiments showed that the proposed scheme was effective.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.23 no.1
• /
• pp.40-47
• /
• 2001

To investigate epidermiologic trend in maxillofacial fractures. We retrospectively studied 934 patients with maxillofacial fractures between $1981{\sim}1987$ and $1995{\sim}1999$. The results were compared in the previous group (Group A, patients treated between $1981{\sim}1987$) with those in the recent group (Group B, $1995{\sim}1999$). Also, we studied 516 patient between $1995{\sim}1999$ for occupation, associated injuries, treatment and complications. The sex ratio of men to women decreased (5.6 : 1 in Group A vs. 3.5 : 1 in Group B), and the largest age group was 20 to 29 years. There was the highest incidence in September and Fall. The most frequent cause of maxillofacial fracture in both Group A and B was traffic accidents. The distribution of fracture site did not change appreciably, but the frequency of midfacial fracture increased. In the recent group, the largest occupational group was salaried men, and the largest associated injuries of maxillofacial fracture was head and neck injury. Open reduction was used in 91% of the cases, and post-operation complications were infection, neurologic problem, malocclusion, and mouth opening limitation etc. Our results suggest that the clinical features of patients with maxillofacial fractures have changed during the past decade.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.26 no.3
• /
• pp.301-304
• /
• 2000

Hemangiopericytoma is uncommon vascular neoplasm that arises from pericytes arround the capillary walls. It was first described as a distinct vascular neoplasm by Stout and Murray in 1942 The anatomic distribution is widespread throughout the body, with approximately one third occur in the head and neck. No sex predilection has been found. Although middle age appears to be the most prevalent time of onset, this neoplasm has been found in all age groups. The differentiation between benign and malignant hemangiopericytoma can be difficult. Although the majority of these tumors are benign, there are malignant variants that can metastasize. Metastasis of seemingly benign tumors may appear year of decade later, so long term close follow-up is needed. The treatment of choice is complete surgical excision of the tumor. Despite their vascular origin, these tumors are relatively radioresistant. Radiation therapy is reserved for inoperable metastases or treatment of postoperative surgical fields. Here we present a case of hemangiopericytoma occuring on the Lt. buccal mucosa.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.7
• /
• pp.2653-2657
• /
• 2015

Nasopharyngeal carcinoma (NPC) is the second most common neoplasm of head and neck in Tunisia. The distribution is bimodal with a first period occurrence between 15 and 20 years old and a second peak at around 50 years of age. Undifferentiated carcinoma of nasopharynx type III (UCNT) is the predominant histological type (93.4%). Data of cancer registry of North Tunisia confirmed that it is an intermediate risk area for NPC with overall ASRs of 3.6 and 1.6/100,000 respectively in males and females. This study aimed to present the evolution of incidence rate of nasopharyngeal carcinoma over a period of 12 years (1994-2006). Data of cancer registry of North Tunisia (NTCR), covering half of the Tunisian population, were used to determine evolution of NPC incidence, calculated by 5 year periods. The estimated annual percentage change (EAPC) was used as an estimate of the trend. To best summarize the behavior or the data trend across years, we used a join-point regression program. Between 1994 and 2006, we observed negative annual average change of standardized incidence in men and women (-3.3%and -2.7%) also for the standardized incidences which showed a rather important decline (26.4% in males and 22.3% in females). The truncated age standardized incidence rate of NPC in adults aged of 30 years old and more (N= 1209) decreased by -0.4% per year from 1994 to 2006 over time in north Tunisia dropping from 6.09 to 4.14 person-years. However, the rate was relatively stable during this period among youths aged 0-29 years (N= 233) in both sexes. NPC demonstrated a favorable evolution from 1994-2006 probably due to a improvement in socioeconomic conditions.

• Progress in Superconductivity and Cryogenics
• /
• v.17 no.3
• /
• pp.13-17
• /
• 2015

In superconducting coil applications particularly in wet wound coils, coated conductor (CC) tapes are subjected to different type of stresses. These include hoop stress acting along the length of the CC tape and the Lorentz force acting perpendicular to the CC tape's surface. Since the latter is commonly associated with delamination problem of multi-layered CC tapes, more understanding and attention on the delamination phenomena induced in the case of coil applications are needed. Difference on the coefficient of thermal expansion (CTE) of each constituent layer of the CC tape, the bobbin, and the impregnating materials is the main causes of delamination in CC tapes when subjected to thermal cycling. The CC tape might also experience cyclic loading due to the energizing scheme (on - off) during operation. In the design of degradation-free superconducting coils, therefore, characterization of the delamination behaviors including mechanism and strength in REBCO CC tapes becomes critical. In this study, transverse tensile tests were conducted under different loading conditions using different size of upper anvils on the GdBCO CC tapes. The mechanical and electromechanical delamination strength behaviors of the CC tapes under transverse tensile loading were examined and a two-parameter Weibull distribution analysis was conducted in statistical aspects. As a result, the CC tape showed similar range of mechanical delamination strength regardless of cross-head speed adopted. On the other hand, cyclic loading might have affected the CC tape in both upper anvil sizes adopted.

• Journal of Ecology and Environment
• /
• v.39 no.1
• /
• pp.71-80
• /
• 2016

The main goal of this study is to develop a multi-metric fishway assessment model (M_m-FA) and evaluate the efficiency of fishway. The M_m-FA model has three major fishway components with nine metrics: structural characteristics, hydraulic/hydrologic features, and biological attributes. The model was developed for diagnosing and assessing fishway efficiency and tested to Juksan Weir at the Yeongsan River Watershed. Structural characteristics of fishway included slope of the fishway (M₁), ratios of fishway width to stream width (M₂), and the proportion of orifice clogging and orifice size (M₃). Hydraulic/hydrologic characteristics included depth of fishway entrance head (M₄), depth of exit tail (M₅), and current velocity of inner fishway (M₆). Biological characteristics included fish species ratio of inner fishway to upper-lower weir (M₇), fish length distribution (M₈), and the proportion of migratory fish species to the total number of species (M₉). Overall, the assessment of fishway efficiency showed the total score of the M_m-FA model was 25 in the Juksan Weir, indicating "good condition" by the criteria of the five-level classification system. The M_m-FA model may be used as a key tool for the assessment of fishway efficiency, especially on the 16 weirs constructed for the "Four Rivers Restoration Project" after a partial calibration of M_m-FA model.