• Journal of the Korean Institute of Gas
• /
• v.23 no.4
• /
• pp.40-45
• /
• 2019

This paper is a purpose to study the failure example for heavy-duty vehicle fire. The first example, the researcher found the engine over-heating phenomenon causing a coolant leakage by the sealing poor of head-gasket because of D-ring part deformation contacting with cylinder liner top-part and cylinder head. He certified a fire breakout by short transferred to surrounding wiring of air-cleaner. The second example, a brake lining by return fault of break operating S cam causing with much wear of a rear 4 wheel brake lining repeatably was worn by friction. In the long run, it became the cause of fire. The third example, the researcher knew the fire cause was came about the short of wire by overload of tilting motor when the driver tilted up the cap to inspect a engine. Therefore, a heavy-duty fire must minimize the fire occurrence by thorough controlling.

• Journal of the Korean Institute of Gas
• /
• v.23 no.3
• /
• pp.20-26
• /
• 2019

Selective catalytic reduction(SCR) method is widely used among various methods for reducing nitrogen oxides in combustion devices of coal power plant. In the present study, the computational fluid dynamic analysis was accomplished to derive the optimal shape of ammonia-dilution air mixing device in a ammonia injection grid. The distribution characteristics of flow and $NH_3$ concentration had been elucidated for the reference shape of ammonia mixing device(Case 1). In the mixing device of Case 1, it could be seen that $NH_3$ distribution was shifted to the wall opposite to the inlet of the ammonia injection pipe. For the improvement of $NH_3$ distribution, the case(Case 2) with closing one upper injection hole and 4 side injection holes, the case(Case 3) with installing horizontal plate at the upper of ammonia injection pipe, the case(Case 4) with installing horizontal plate and horizontal arc plate at he upper of ammonia injection pipe were investigated by analyzing flow and $NH_3$ concentration distributions. From the present study, it was found that the % RMS of $NH_3$ for Case 4 was 4.92%, which was the smallest value among four cases, and the range of $R_{NH3}$ also has the optimally uniform distribution, -10.82~8.34%.

• Journal of the Korean Institute of Gas
• /
• v.26 no.3
• /
• pp.54-59
• /
• 2022

This paper is a purpose to study and analyze the failure examples for timing belt, camshaft position sensor and ignition coil of LPG automotive engine. The first example, whe the service man install the front case bracket of engine, he excessively tightened up a 12mm bolt for being fixed of brackct. As a results, the bolt was separated from joint part so that it was put in between the crankshaft sprocket. Therefore the belt was broken off because of interference between timing belt and sprocket tooth. The second example, it verified the disharmony phenenomen of engine that the gap of the camshaft position sensor and camshaft senseing point assembled on cylinder head part was small more than iregular value so that the it was generated senseing damage phenomenon by pulse signal misconduct. The third example, it was found the engine disharmony phenomenon that the fire in the ignition coil was leaked by inner damage of Number 2 ignition coil.Therefore, the the manager of a car throughtly have to inspect not in order to arise the failure symptoms.

• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• v.4 no.2
• /
• pp.249-255
• /
• 2001

Methylmalonic acidemia is a rare congenital autosomal recessive metabolic disease. It is caused by blocking in the pathways of isoleucine, valine, threonine, methionine, cholesterol and odd-chain fatty acids to succinyl CoA, resulting in the increase of L-methylmalonyl CoA and methylmalonic acid. In most cases, there are symptoms such as recurrent vomitings, lethargy and laboratory abnormalities including metabolic acidosis and hyperammonemia from the neonatal period. We had a 6-month-old infant with methylmalonyl acidemia who presented with recurrent vomiting episodes since 3 months of age, failure to thrive and developmental delay. The laboratory findings showed hyperammoninemia and ketotic metabolic acidosis. Plasma amino acid analysis showed nonspecific finding. Urine organic acid ananysis by gas chromatography and mass spectrometry detected large amount of methylmalonic acid excreted in the urine. We restrained the supply of protein in the amount of 1~1.5 g/kg of body weight a day using leucine, isoleucine and valine-r-estrained milk and administered vitamine $B_{12}$, in the amount of 1mg per day. During the follow-up in the outpatient clinic, He could control his head and showed increased muscle strength.

• Progress in Superconductivity and Cryogenics
• /
• v.3 no.1
• /
• pp.64-68
• /
• 2001

An experimental study on the Joule-Thomson cryocooler with the mixed refrigerant (MR) is described in this paper, J-T refrigeration experiment was performed with a single stage regular air-conditioning compressor The mixed refrigerant in the experiment was composed of 75% mol fraction of $N_2$. 30% moi fraction of CH$_4$. 30% moi fraction of $C_2$H$_{6}$. 10% mot fraction of $C_3$H$_{8}$ and 15% mot fraction of iso-C$_4$H$_{10}$. Oil mist in the MR stream could be eliminated completely by the glass microfiber filter. Since a single stage compressor that had been designed thor R22 is not appropriate for high Pressure ratio of the mixed refrigerant especially during the transient period. two modifications were incorporated to regular J-T refrigeration cycle. First. a Portion of the MR was by-passed at the inlet of the heat exchanger and transferred directly to 7he suction of the compressor in the modified system. Second, a buffer volume was Prepared to change the mass flow rate of refrigerant. The pressure ratio in J-T expansion device was relieved at the beginning of the operation due to the by-Pass scheme. but it gradually decreased during the transient Process as some of the MR component condensed at low temperature. The buffer volume at the suction side was used to increase the MR gas density in the system after the transient cool-down period. Form the experiment with the modified system, the refrigerator could reach the lowest temperature of -152$^{\circ}C$ without cooling load. and about -15$0^{\circ}C$ with 5 W of cooling load . . . .

• Geomechanics and Engineering
• /
• v.22 no.2
• /
• pp.133-142
• /
• 2020

The evolution of the mining-induced fracture network formed during longwall top coal caving (LTCC) has a great influence on the gas drainage, roof control, top coal recovery ratio and engineering safety of aquifers. To reveal the evolution of the mining-induced stress and fracture network formed during LTCC, the fracture network in front of the working face was observed by borehole video experiments. A discrete element model was established by the universal discrete element code (UDEC) to explore the local stress distribution. The regression relationship between the fractal dimension of the fracture network and mining stress was established. The results revealed the following: (1) The mining disturbance had the most severe impact on the borehole depth range between approximately 10 m and 25 m. (2) The distribution of fractures was related to the lithology and its integrity. The coal seam was mainly microfractures, which formed a complex fracture network. The hard rock stratum was mainly included longitudinal cracks and separated fissures. (3) Through a numerical simulation, the stress distribution in front of the mining face and the development of the fracturing of the overlying rock were obtained. There was a quadratic relationship between the fractal dimension of the fractures and the mining stress. The results obtained herein will provide a reference for engineering projects under similar geological conditions.

• Journal of Microbiology and Biotechnology
• /
• v.27 no.10
• /
• pp.1885-1891
• /
• 2017

In this study, we evaluated the inhibitory effect of a rice bran mixture extract (RBE) on Brucella abortus pathogenesis in professional (RAW 264.7) and nonprofessional (HeLa) phagocytes. We fermented the rice bran mixture and then extracted it with 50% ethanol followed by gas chromatography-mass spectrometry to identify the components in RBE. Our results clearly showed that RBE caused a significant reduction in the adherence of B. abortus in both cell lines. Furthermore, analysis of phagocytic signaling proteins by western blot assay revealed that RBE pretreatment resulted in inhibition of phosphorylation of JNK, ERK, and p38, leading to decline of internalization compared with the controls. Additionally, the intensity of F-actin observed by fluorescence microscopy and FACS was remarkably reduced in RBE-pretreated cells compared with control cells. However, the intracellular replication of B. abortus within phagocytes was not affected by RBE. Taken together, these findings suggest that the phagocytic receptor blocking and suppressive effects of RBE on the MAPK-linked phagocytic signaling pathway could negatively affect the invasion of B. abortus into phagocytes.

• Tuberculosis and Respiratory Diseases
• /
• v.62 no.3
• /
• pp.223-226
• /
• 2007

Tetrafluoroethylene is a colorless gas that can be used to synthesize a variety of fluoride compounds by polymerization (e.g., Teflon). Fluoride compounds have many applications in industry. There are several reports of inhalation injury from the pyrolytic product of fluoride compounds. When the polymer is heated under the conditions of inadequate ventilation, the fumes can cause polymer fume fever or pulmonary edema which manifested as symptoms such as fever, chill, profuse sweating, cough and dyspnea. However there are no reports of a direct lung injury caused by tetrafluoroethylene. We report a case of a 27-year-old male presented with acute lung injury after inhaling concentrated tetrafluoroethylene. He complained of cough and dyspnea after the accidental inhalation of tetrfluoroethylene at his workplace. The symptoms improved without any complications after conservative treatment with oxygen and steroid.

• Journal of Families and Better Life
• /
• v.24 no.5 s.83
• /
• pp.89-99
• /
• 2006

The purpose of this study was to devise guidelines for the kitchen workspace of the aged by examining current usage. To achieve this objective, surveys were conducted and measurement were taken between June 15 and lune 30, 2005. The data were gathered from 50 women over 65- years-old who live in the downtown and suburbs of Seoul, Korea. The collected data were processed using SPSS 12.0 for Microsoft Windows and resulted in the following conclusions: The kitchen for the aged needs to be laid out in ㄱ-shape and the refrigerator needs to be positioned prominently. The height of the work counter is relative to the user's height (${\times}0.49{\sim}056$). and the length varies depending on the available space of the house and the type of work counter needed: however it was found that it should be at least 270cm Concerning the depth of the work counter, the standard sizes (60cm) currently on the market did not cause any inconvenience. It was found that the sink must be designed to allow for some space at the bottom so as to ensure comfortable sedentary work. Also, an electrical oven was preferred over a gas-fuelled one. Finally, the height of the upper cabinet should be relative to the user's height at ${\times}0.85{\sim}1.0$ from the floor to the bottom of the cabinet.

• KSBB Journal
• /
• v.14 no.2
• /
• pp.192-197
• /
• 1999

marine bacterium Pseudomonas sp. CHCS-2 produced the biosurfactant in the culture broth which contained 2%(w/v) arabian light crude oil and the productivity of biosurfactant was increased with the addition of glucose. The crude oil in the culture broth was degraded by this strain and carbon chain of $_nC_{12}~_nC_{22}$ was completely degradaded during the incubation for 196 h. The crude biosurfactant was purified by Amberlite XAD-7, Sepharose CL-4B and DEAE-Sepharose CL-6B column chromatography. Therefore, 0.21g/L of the purified biosurfactnat was obtained. The purified biosurfactant was a type of lipoprotein and the molecular weight was estimated as 67kDa by SDS-PAGE. The lipid composition was identified as octadecanoic acid by gas chromatography/mass spectrometry. And then, the N-terminal amino acid sequence of the protein was determined as Ser-Val-lle-Asn-Thr-lle-X-Met-lle-Gly-Gln-Gln- and the sequence did not show homology to any other known lipoprotein. Therefore, the purified lopoprotein was predicted novel biosurfactant.