• Title/Summary/Keyword: Hazards contaminants

Search Result 25, Processing Time 0.036 seconds

Korea Total Diet Study-Based Risk Assessment on Contaminants Formed During Manufacture, Preparation and Storage of Food

  • Kwon, Kisung;Jo, Cheon-Ho;Choi, Jang-Duck
    • Journal of Food Hygiene and Safety
    • /
    • v.36 no.3
    • /
    • pp.213-219
    • /
    • 2021
  • Hazardous substances are formed during food manufacturing, processing, or cooking, and may pose a threat to food safety. Here, we present a dietary exposure assessment of Korean consumer's intake of hazardous materials through a Total Diet Study (TDS) which was conducted by the Ministry of Food and Drug Safety (MFDS). The levels of exposure to materials such as acrylamide, furan, biogenic amines, etc., were estimated and risk assessments were then performed. Acrylamide and furan were selected as hazards with high priority of reduction control due to their having a margin of exposure (MOE) lower than 10,000. Risk assessment of exposure to ethyl carbamate, benzene and 3-MCPD showed MOEs higher than 100,000, indicating "safe". Dietary exposure to polycyclic aromatic hydrocarbons and benzopyrene was also found to be safe MOE levels >10,000. In addition, the results indicated safe MOEs (>1,000,000) for heterocyclic amines, nitrosamines, and biogenic amines. Most of the potential food contaminants were being kept at safe levels, however, it is necessary to continue to monitor and control exposure levels in accordance with the 'as low as reasonably achievable' (ALARA) principle.

Hazard Analysis and Determination of CCPs for Powdered Raw Grains and Vegetables, Saengshik (생식의 위해요인 분석 및 중요관리점 설정)

  • Kim, Dong-Ju;Ha, Sang-Do;Ryu, Kyung;Park, Ki-Hwan
    • Korean Journal of Food Science and Technology
    • /
    • v.36 no.6
    • /
    • pp.1032-1040
    • /
    • 2004
  • Biological, physical, and chemical hazards in raw manufacturing processes of Saengshik, powdered raw grains and vegetables, were analyzed to identify critical control points (CCPs). In raw materials, total plate and coliform counts ranged 2.82-8.23 and $1.40-6.57\;{\log}_{10}\;CFU/g$, respectively. In final products, total plate counts, except for Lactobacillus spp., were $1.51-7.40\;{\log}_{10}\;CFU/g$. During processing steps, both total plate and coliform counts decreased after washing, whereas no changes were observed after freeze-drying. Physical hazards, such as contents of metal and other contaminants, and chemical hazards, such as moisture content, were assessed. Suggested CCPs for Saengshik were: washing process for controlling microbial contamination, freeze-drying process for controlling moisture content to prevent deterioration and growth of microorganisms, and pulverization process for controlling contamination of foreign substances such as metals. These results will provide guideline to apply HACCP system standards to this product.

The Occupational Exposure Limit for Fluid Aerosol Generated in Metalworking Operations: Limitations and Recommendations

  • Park, Dong-Uk
    • Safety and Health at Work
    • /
    • v.3 no.1
    • /
    • pp.1-10
    • /
    • 2012
  • The aim of this review was to assess current knowledge related to the occupational exposure limit (OEL) for fluid aerosols including either mineral or chemical oil that are generated in metalworking operations, and to discuss whether their OEL can be appropriately used to prevent several health risks that may vary among metalworking fluid (MWF) types. The OEL (time-weighted average; 5 mg/$m^3$, short-term exposure limit ; 15 mg/$m^3$) has been applied to MWF aerosols without consideration of different fluid aerosol-size fractions. The OEL, is also based on the assumption that there are no significant differences in risk among fluid types, which may be contentious. Particularly, the health risks from exposure to water-soluble fluids may not have been sufficiently considered. Although adoption of The National Institute for Occupational Safety and Health's recommended exposure limit for MWF aerosol (0.5 mg/$m^3$ ) would be an effective step towards minimizing and evaluating the upper respiratory irritation that may be caused by neat or diluted MWF, this would fail to address the hazards (e.g., asthma and hypersensitivity pneumonitis) caused by microbial contaminants generated only by the use of water-soluble fluids. The absence of an OEL for the water-soluble fluids used in approximately 80-90 % of all applicants may result in limitations of the protection from health risks caused by exposure to those fluids.

Levels of organochlorine pesticides and PCB congeners in Korean human tissues

  • Yoo, Young-Chan;Lee, Sang-Ki;Yang, Ja-Youl;Kim, Ki-Wook;Lee, Soo-Yeun;Oh, Seung-Min;Chung, Kyu-Hyuck
    • Proceedings of the PSK Conference
    • /
    • 2002.10a
    • /
    • pp.283.2-283.2
    • /
    • 2002
  • Organochlorine pesticides and polychlorinated biphenyls (PCBs) have been used intensively in agriculture and industry for a long time. They belong to a group of contaminants whose occurrence in the environment is a serious concern to environmental chemists and toxicologists due to their resistance to degradation in the environment as well as their potential toxicity. Also. the lipophilic characteristics of these substances are responsible for their ability to bioaccumulate in tissues and organs rich in lipids of men and animals through food chain. Therefore, the measure of the levels of organochlorine pesticides and PCBs in human tissues are good markers in detemining the extent to exposure and evaluating the hazards. This study was preformed to compare concentrations of organochlorine pesticides(${\alpha}-BHC, {\beta}-BHC, {\gamma}-BHC, {\delta}-BHC$, p.p'-DDT,p.p'-DDD,p.p.'-DDE. endrin. dieldrin. aldrin) and seven marker PCBs(PCB nos. 28. 52. 101. 118. 138. 153. 180) in liver. kidney cortex, lung blood and adipose tissue collected at autopsies of 10men and 10 women using gas chromatography equipped with electron capture detector to express the data on a lipid adjusted basis. From the results, the significant differences in the levels of organochlorines of PCBs between sexes, districts where they had lived and ages were also investigated.

  • PDF

Biology and Health Aspects of Molds in Foods and the Environment

  • Bullerman, Lloyd-B.
    • Journal of the Korean Society of Food Science and Nutrition
    • /
    • v.22 no.3
    • /
    • pp.359-366
    • /
    • 1993
  • Molds are eucaryotic, multicellular, multinucleate, filamentous organisms that reproduce by forming asexual and sexual spores. The spores are readily spread through the air and because they are very light-weight and tend to behave like dust particles, they are easily disseminated on air currents. Molds therefore are ubiquitous organisms that are found everywhere, throughout the environment. The natural habitat of most molds is the soil where they grow on and break down decaying vegetable matter. Thus, where there is decaying organic matter in an area, there are often high numbers of mold spores in the atmosphere of the environment. Molds are common contaminants of plant materials, including grains and seeds, and therefore readily contaminate human foods and animal feeds. Molds can tolerate relatively harsh environments and adapt to more severe stresses than most microorganisms. They require less available moisture for growth than bacteria and yeasts and can grow on substrates containing concentrations of sugar or salt that bacteria can not tolerate. Most molds are highly aerobic, requiring oxygen for growth. Molds grow over a wide temperature range, but few can grow at extremely high temperatures. Molds have simple nutritional requirements, requiring primarily a source of carbon and simple organic nitrogen. Because of this, molds can grow on many foods and feed materials and cause spoilage and deterioration. Some molds ran produce toxic substances known as mycotoxins, which are toxic to humans and animals. Mold growth in foods can be controlled by manipulating factors such as atmosphere, moisture content, water activity, relative humidity and temperature. The presence of other microorganisms tends to restrict mold growth, especially if conditions are favorable for growth of bacteria or yeasts. Certain chemicals in the substrate may also inhibit mold growth. These may be naturally occurring or added for the purpose of preservation. Only a relatively few of the approximately 100,000 different species of fungi are involved in the deterioration of food and agricultural commodities and production of mycotoxins. Deteriorative and toxic mold species are found primarily in the genera Aspergillus, Penicillium, Fusarium, Alternaria, Trichothecium, Trichoderma, Rhizopus, Mucor and Cladosporium. While many molds can be observed as surface growth on foods, they also often occur as internal contaminants of nuts, seeds and grains. Mold deterioration of foods and agricultural commodities is a serious problem world-wide. However, molds also pose hazards to human and animal health in the form of mycotoxins, as infectious agents and as respiratory irritants and allergens. Thus, molds are involved in a number of human and animal diseases with serious implication for health.

  • PDF

Effect of Bioluminescence Stimulating Agent of the Genetically Engineered Strain KG1206 on the Monitoring of the Petroleum Hydrocarbon Contaminated Groundwater Samples (발광유전자 재조합 균주 활성 촉진 조건이 석유계 탄화수소 오염지하수 모니터링에 미치는 영향)

  • Ko, Kyung-Seok;Kong, In-Chul
    • Journal of Korean Society of Environmental Engineers
    • /
    • v.30 no.1
    • /
    • pp.79-84
    • /
    • 2008
  • This paper describes the application of bioluminescence stimulating agents on a genetically engineered microorganism, Pseudomonas putida mt-2 KG1206, to monitor toluene analogs using in groundwater samples from petroleum hydrocarbon contaminated sites. The maximum bioluminescent response with pure chemicals followed in the order: m-methyl benzyl alchohol > m-toluate > toluene > m-xylene > benzoate > p-xylene > o-xylene. Generally, the bioluminescence production of strain mixed with groundwater samples was dependent on the contaminated total inducer concentrations. However, few samples showed opposite results, where these phenomena may be caused by the complexicity of environmental samples. Two chemicals, SL(sodium lactate) and KNO$_3$, were tested to determine a better bioluminescence stimulant. Both chemicals stimulate the bioluminescence activity of strain KG1206, however, a slightly high bioluminescence was observed with nitrogen chemical. This selected stimulant was then tested on samples collected from contaminated groundwater samples. The bioluminescence activity of all samples mixed with the strain was stimulated with KNO$_3$ amendment. This suggests that the low bioluminescence activity exhibited by the environmental groundwater samples can be stimulated by amending the culture with a proper agent, such as nitrogen compound. These findings would be useful, especially, when strain was used to monitor the groundwater samples contaminated with low inducer contaminants. Overall, the results of this study found the ability of bioluminescence producing bacteria to biosensor a specific group of environmental contaminants, and suggest the potential for more efficient preliminary application of this engineered strain in a field-ready bioassay.

The Environmental Hazard Assessment of Siting Restricted Industries from Industrial Complex in Rural Area Applied by Chemical Ranking and Scoring System (화학적 등급화기법을 적용한 농공단지 입주제한업종의 환경유해성 평가)

  • Hong, Sang-Pyo
    • Journal of Environmental Impact Assessment
    • /
    • v.24 no.6
    • /
    • pp.549-560
    • /
    • 2015
  • The priorities of siting restriction was derived from quantification of environmental hazard according to industrial classification based on 'Chemical Ranking and Scoring System(CRS)' which is handling the discharge characteristics of 31 industrial classifications regulated from locating at 'Industrial Complex in Rural Area(ICRA)'. CRS that is utilizing the data of 'Pollutant Release and Transfer Registers(PRTR)' is applied to determine human health risk and ecological risk which are calculated by discharged amount and materials $LC_{50}$ according to water, soil and air media based on industrial classification. From this process, exposure assessment and toxicity assessment for integrating the adverse environmental impact and the mitigation effect of environmental risk according to the development of environmental technologies into establishing the rational landuse management method for the 31 industrial classifications regulated from locating at ICRA was analyzed. From the assessment result of the siting restriction removal at ICRA for 31 industrial classifications, based on 2012 year reference 6 industries that includes Manufacture of Guilt Coloration Surface Processing Steel Materials, Manufacture of Biological Product, Manufacture of Smelting Refining and Alloys of Copper, Dyeing and Finishing of Fibers and Yarns, Manufacture of Other Basic Iron and Steel n.e.c., Rolling Drawing and Extruding of Non-ferrous Metals n.e.c. are calculated as having relatively lower environmental hazards, thus it is judged that the siting restriction mitigation at ICRA is possible for the 6 industrial classifications that are not discharging the specific hazardous water contaminants during manufacturing process.

A Study on Improvement Plan for Sediment Environmental Guidelines in the Sea Area Utilization Consultation System -Focused on Port and Fishery Harbor Development Case- (해역이용협의서 중 퇴적물 환경기준 개선방안 연구 -항만 어항개발사업 사례를 중심으로-)

  • Jun, Eun Ju;Ju, Hyun Hee;Tac, Dae Ho
    • Journal of the Korean Society of Marine Environment & Safety
    • /
    • v.27 no.5
    • /
    • pp.584-593
    • /
    • 2021
  • The sediment makes up the sea floor and plays an important role as a habitats for living things in the sea. However, pollution of coastal sediment due to internal and external factors such as inflow of contaminants from land and self-pollution becoming more serious, the needs for management of sediment that play an important role in ecology, is increasing. In particular, the review and evaluation of the effects of sediment in marine development projects including reclamation and dredging, have significance in terms of proactive protection and management of surrounding ecosystems. This study proposed the improvement measures for marine sediment management standards on the sea area utilization consultation for the development of public water. For the purpose, The evaluation and management standards of domestic and overseas marine sediments were reviewed and compared. The sediment environment guidelines under the Marine Environment Management Act of Korea were reviewed. Accordingly, the cases of Canada and NOAA, which have various evaluation standards consist of comprehensive factors, were analyzed. For analysis of operational cases, the port and fishing port development projects for the last five years (2016-2020) that are considered to have the greatest impact on sediments among the sea area use consultations were also reviewed. Finally, this study suggested that the assessment factors for ecological hazards and potential human risks should be considered in the sediment environmental standards in the sea area utilization consultation system.

A Study on Several Minerals Contaminated with Asbestiform Fibers in Korea (우리나라 일부 광물중 석면섬유의 함유에 대한 조사)

  • Choi, Jung Keun;Paek, Do Myung;Paik, Nam Won;Hisanaga, Naomi;Sakai, Kiyoshi
    • Journal of Korean Society of Occupational and Environmental Hygiene
    • /
    • v.8 no.2
    • /
    • pp.254-263
    • /
    • 1998
  • A worker employed in a serpentine mine was found developed mesothelioma as the first case of Korea in 1997. Asbestos was known as a causative agent for mesothelioma. Thus, asbestos contamination in mines could be a big health threat to those workers who were unknowingly exposed. However, there was no report that any minerals found in Korea contained asbestos. This study was carried out to find the presence of any asbestiform fibers in minerals which could be obtained in Korean mines. We examined fifteen minerals from 44 mines which were suspected contaminated with asbestiform fibers. Asbestiform analysis was done with high resolution transmission electron microscope(TEM), with energy dispersive X-ray spectroscope(EDX) and X-ray diffraction(XRD) analyses. Among asbestiform fibers, chrysotile was found in chrysotile, serpentine, talc and pyrophylite specimens from 11 mines. Tremolite was found in tremolite and talc specimens from three mines. Mordenite was found in zeolite specimens from two mines. Wallastonite and sepiolite were found in wallastonite and sepiolite specimens respectively. Crocidolite, antigorite and actinolite were found from talc specimens. But no asbestiform fiber contaminants were found in doromite, vermiculite, limestone, marble, gypsum, kaolin, and clary specimens. Thus, these asbestiform fibers such as such as chrysotile, tremolite, mordenite, crocidolite, antigorite and actinolite could be the responsible agents for the health hazards such as mesothelioma and other cancers.

  • PDF

Total Diet Study: For a Closer-to-real Estimate of Dietary Exposure to Chemical Substances

  • Kim, Cho-il;Lee, Jeeyeon;Kwon, Sungok;Yoon, Hae-Jung
    • Toxicological Research
    • /
    • v.31 no.3
    • /
    • pp.227-240
    • /
    • 2015
  • Recent amendment on the Food Sanitation Act in Korea mandated the Minister of Food & Drug Safety to secure the scientific basis for management and reevaluation of standards and specifications of foods. Especially because the current food safety control is limited within the scope of 'Farm to Market' covering from production to retail in Korea, safety control at the plane of true 'Farm to Fork' scope is urgently needed and should include 'total diet' of population instead of individual food items. Therefore, 'Total Diet Study (TDS)' which provides 'closer-to-real' estimates of exposure to hazardous materials through analysis on table-ready (cooked) samples of foods would be the solution to more comprehensive food safety management, as suggested by World Health Organization and Food and Agriculture Organization of the United Nations. Although the protection of diets from hazards must be considered as one of the most essential public health functions of any country, we may need to revisit the value of foods which has been too much underrated by the meaningless amount of some hazardous materials in Korea. Considering the primary value of foods lies on sustaining life, growth, development, and health promotion of human being, food safety control should be handled not only by the presence or absence of hazardous materials but also by maximizing the value of foods via balancing with the preservation of beneficial components in foods embracing total diet. In this regard, this article aims to provide an overview on TDS by describing procedures involved except chemical analysis which is beyond our scope. Also, details on the ongoing TDS in Korea are provided as an example. Although TDS itself might not be of keen interest for most readers, it is the main user of the safety reference values resulted from toxicological research in the public health perspective.