• Korean Journal of Food Science and Technology
• /
• v.45 no.4
• /
• pp.391-402
• /
• 2013

Pesticide residues in agricultural products in Korea were evaluated to create a data base to inform food policy. Pesticide residues were investigated in 17 commodities collected from 9 provinces in 2012. Our analytical method of multiresidue analysis, involved the analysis of individual recovery, linearity, limit of detection, and limit of quantitation of 60 pesticides in six matrices. The pesticides, including acetamiprid and forchlorofenuron, were evaluated in 358 agricultural samples by liquid chromatography/tandem mass spectrometry. Twenty three pesticides were detected from 67 samples. The results showed that the ratio of estimated daily intake to acceptable daily intake was 0.00009-0.0861% by the intake assessment, which means that residual pesticides in agricultural products in Korea are properly controlled.

• Korean Journal of Food Science and Technology
• /
• v.44 no.1
• /
• pp.21-27
• /
• 2012

This research was carried out as a survey on the contents of lead, cadmium, and arsenic in processed foods (milk, vegetable oil, and margarine) in Korea. The limits of quantification (LOQs) were Pb 0.3 ${\mu}g/kg$, Cd 0.15 ${\mu}g/kg$, and As 0.45 ${\mu}g/kg$ for milk and Pb 0.61 ${\mu}g/kg$, Cd 0.31 ${\mu}g/kg$, and As 0.91 ${\mu}g/kg$ for vegetable oil and margarine. The recoveries were 92.6-98.0% for Pb, 91.2-98.9% for Cd, and 97.9-104.7% for As. The average levels of Pb were 2.395 ${\mu}g/kg$ for milk, and 7.656 ${\mu}g/kg$ for vegetable oil. The average levels of Cd were 0.483 ${\mu}g/kg$ for milk, and 0.380 ${\mu}g/kg$ for vegetable oil, and levels of As were 0.781 ${\mu}g/kg$ for milk, and 1.241 ${\mu}g/kg$ for vegetable oil. The results of this study showed that Pb, Cd, and As contents in the whole samples were less than the maximum residual levels in the processed foods that were specified by the Codex standard.

• Journal of Radiation Industry
• /
• v.7 no.1
• /
• pp.69-74
• /
• 2013

This study examined radiation detection characteristics of spices (cumin, caper and turmeric), other small fruits (hut-gae berry and boxthorn), and pollen extract product. Each samples were irradiated at dose of 1, 5, and 10 kGy and analyzed by the thermoluminescence (TL) and electron spin resonance (ESR) methods. To compare between non-irradiated and irradiated food, all samples were irradiated with $^{60}Co$ gamma-ray source. In TL analysis, most of samples could be applied to detect irradiated foods because of showing TL ratio above 0.1. The glow curves examined by TL method were estimated in the range of $150{\sim}250^{\circ}C$ in irradiated samples. In ESR measurements, the intensity of ESR signal (single-line) increased as the increase of irradiation dose. In particular, the specific ESR signals of irradiation-induced radical were detected in hut-gae berry and pollen extract product. As a results, it is considered that TL and ESR methods can be used to detect both hut-gae berry and pollen extract product. But cumin, caper, turmeric and boxthorn irradiated with gamma ray could be detected only by TL method. It is concluded that TL and ESR methods are suitable for detection of irradiated samples and a combined method is recommendable for enhancing the reliability of detection results.

• Analytical Science and Technology
• /
• v.19 no.2
• /
• pp.172-180
• /
• 2006

This study was performed to establish new methods for hazardous substances and to develop an analytical method in specified wastes for preventing the environmental pollution caused by hazardous wastes. Therefore, the trends of international management, regulatory criteria, and items of hazardous wastes in various countries were investigated. Based on this study, target priority of new hazardous substances in specified wastes was established. An analytical method was developed using the waste standard reference materials of sludge, oil, bottom ash, etc., which contain the new hazardous substances (Ba, Be, Cr(VI), F, Ni, Sb, Se, and V). A total of 37 waste samples from the representative facilities, which are emitting new hazardous substances, were analyzed.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2006.06b
• /
• pp.215-220
• /
• 2006

The oil on board is a major source of sea pollutions. Recently, according to increasement of Hazardous and noxious substances carrying on board. Our greatest concern is how to response HNS spread pollution, addition to response oil spill pollution. This is first aim how can take a speedy and precise response. So introduce to development of the computerized response aid system for HNS.

• Journal of Ocean Engineering and Technology
• /
• v.32 no.4
• /
• pp.272-278
• /
• 2018

Recently, the use of hazardous chemicals has been continuously increasing. Therefore, the international trade volume is growing and chemical accidents have increased. Nowadays, the safety awareness of the public has increased. As a result, the management and supervision of hazardous chemicals have been strengthened. However, the port policy of Korea has focused on increasing the volume of cargo through facility development. Thus, the port management of hazardous chemicals has been relatively neglected. For national economic growth and society, the port management of hazardous chemicals should be considered to efficiently ensure safety and economic growth. Therefore, this study assumed scenarios where hazardous materials were moved in a dangerous container, not only on appropriate wharfs but also in ports that were close to a big city. The BTX substances were selected among the toxic chemicals with large import and export volumes, and the risk distance and damage effects were predicted using various risk assessment programs. It is expected that this could be used to improve a port safety management system and could be utilized to determine the safety distance in case of an accident.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.23 no.2
• /
• pp.137-147
• /
• 2013

Objectives: This study was conducted in order to evaluate the limitations of the regulations on the safety and health standards for special management materials(SMM) under the Industrial Safety and Health Act in Korea. Methods: Hazardous chemicals management systems in Germany(Hazardous Substances Ordinance), the UK(Control of Substances Hazardous to Health Regulations), Japan(Ordinance on Prevention of Hazards due to Specified Chemical Substances) and Korea(Regulation of Occupational Safety and Health Standards, ROSHS) were investigated and compared in terms of 14 items. Results: Among the 14 items, we eventually found seven items which should be amended: 1) definition and scope, 2) general duties clause, 3) principles of management, 4) preventive measures, 5) control measures, 6) risk assessment, and 7) record keeping. The principal limitations of Korean regulations in comparison with those of other countries were that there were no preventive measures such as substitution, and no principles of good practices for the control of exposure to SMM. In terms of control measures, there were no regulations on suitable workplace design, reducing the number of exposed workers, reducing the level and duration of exposure, and reducing the quantity of hazardous substances in ROSHS. Conclusions: Based on the results of this study, ROSHS should be complemented with preventive measures and the principles of management related to SMM. According to the suggestions, an employer who deals with SMM should preferably consider the possibility of substitution and perform substitution so far as is reasonably practicable.

• Journal of the Korea Convergence Society
• /
• v.8 no.11
• /
• pp.439-445
• /
• 2017

This study compares the safety of nail products by reviewing domestic and foreign literature for preparing a safety management plan for reduction of human body exposure to hazardous substances that occur in nail products. We analyzed the cases of exceeding the limit value of hazardous substances. In domestic artificial nail adhesive and nail tip, toluene content was 40.3 times higher than the standard value, chloroform was 22.8 times, and antimony was 15.4 times. In developed countries, it is obligatory to provide material safety data and workplace ventilation equipment through various policy researches. However, there is no safety standard in Korea. Therefore, if the regulations for safety management should be established with each characteristic of nail product, work environment, workers, and consumers, and the awareness of hazardous substance cosmetics should be improved through development and dissemination of various educational programs, it can contribute to disease prevention and health promotion.

• Toxicological Research
• /
• v.28 no.3
• /
• pp.143-149
• /
• 2012

To prepare measures for practical policy utilization and the control of heavy metals, hazard control related institutions by country, present states of control by country, and present states of control by heavy metals were examined. Hazard control cases by heavy metals in various countries were compared and analyzed. In certain countries (e.g., the U.S., the U.K., and Japan), hazardous substances found in foods (e.g., arsenic, lead, cadmium, and mercury) are controlled. In addition, the Joint FAO/WHO Expert Committee on Food Additives (JECFA) recommends calculating the provisional tolerable weekly intake (PTWI) of individual heavy metals instead of the acceptable daily intake (ADI) to compare their pollution levels considering their toxicity accumulated in the human body. In Korea, exposure assessments have been conducted, and in other countries, hazardous substances are controlled by various governing bodies. As such, in Korea and other countries, diverse food heavy metal monitoring and human body exposure assessments are conducted, and reducing measures are prepared accordingly. To reduce the danger of hazardous substances, many countries provide leaflets and guidelines, develop hazardous heavy metal intake recommendations, and take necessary actions. Hazard control case analyses can assist in securing consumer safety by establishing systematic and reliable hazard control methods.

• Analytical Science and Technology
• /
• v.25 no.4
• /
• pp.257-264
• /
• 2012

Penicillins belong to the ${\beta}$-lactam class of antibiotics, and are frequently used in human and veterinary medicine. Despite the positive effects of these drugs, improper use of penicillins poses a potential health risk to consumers. This study has been undertaken to determinate multi-residues of penicillins, including amoxicillin, ampicillin, oxacillin, bezylpenicillin, cloxacillin, dicloxacillin, and nafcillin, using liquid chromatographic tandem mass spectrometer (LC-MS/MS). The developed method was validated for specificity, precision, recovery, and linearity in livestock and marine products. The analytes were extracted with 80% acetonitrile and clean-up by a single reversed-phase solid-phase extraction step. Six penicillins presented recoveries higher than 76% with the exception of Amoxicillin. Relative standard deviations (RSDs) were not more than 10%. The method was applied to 225 real samples. Benzylpenicillin was detected in 12 livestock products and 7 marine products. Amoxicillin, ampicillin, cloxacilllin, dicloxacillin, nafcillin and oxacillin were not detected. The detected levels were 0.001~0.009 mg/kg in livestock products excluding eggs and milk. In marine products, the detected levels were under 0.03 mg/kg. They were under the MRL levels. As monitoring results, it is identified to be safe but it is considered that safety management of antibiotics should continue by monitoring.