• Journal of The Korean Society of Grassland and Forage Science
• /
• v.37 no.3
• /
• pp.201-207
• /
• 2017

Hay-making is one of the most common forage preservation practices in livestock operations. The objective of hay-making is to minimize nutrient loss by shortening field drying time. Measuring the impacts of cutting height of forage crop is necessary to optimize hay production balancing yield and quality, in order to obtain substantial biomass increase through harvest of regrowth. This experiment was conducted to investigate the impact of cutting height of rye (Secale cereale L.) on drying rate and hay quality. Heading stage rye was harvested at 8cm or 15cm stubble heights. Hay was daily tedded at 09:00 and sampled at 09:00, 13:00 and 17:00 to determine moisture content (MC). After two month of preservation, CP (crude protein), ADF (acid detergent fiber), NDF (neutral detergent fiber), IVDMD (in vitro dry matter disappearance), TDN (total digestible nutrient), RFV (relative feed value), DM (dry matter) loss, visual scores and total fungi count were determined for estimation of hay quality. Cutting height at 15cm could enhance the drying rate and CP content (p<0.05), but also increases DM loss (p<0.05) compared to cutting at 8cm. Cutting heights did not affect ADF, NDF, IVDMD, TDN and RFV value (p>0.05). Visual scores of rye hays cutting at 8cm and 15cm, ranged from 83 to 85. Cutting at 8cm tended to maintain higher core bale temperature and fungal count than cutting at 15cm during preservation, but there was no significant difference.

• Asian-Australasian Journal of Animal Sciences
• /
• v.13 no.8
• /
• pp.1109-1112
• /
• 2000

A field experiment was carried out to determine the effects of mechanical and chemical conditioning at mowing on field drying rate and quality of grass hay in 1996. Mower conditioner and/or chemical drying agent $(K_2CO_3)$ were used at different harvest stages (late boot, heading and bloom stages) for hastening hay-making. After field drying, square bales were made by hay baler, and the visual estimation and nutritive value of hay were evaluated after storing two months. In mower conditioning, the duration of field drying was shortened by 0.5 to 1 day compared with drying agent, and by 1 to 2 days compared with control. The drying matter loss of hay was reduced by late harvest and mechanical conditioning. The visual score (leafiness, green color, odor and softness), and acid detergent fiber (ADF), neutral detergent fiber (NDF), in vitro dry matter digestibllity (IVDMD), and relative feed value (RFV) of hay were improved with mechanical conditioning, but chemical alone had little effect on quality. The quality of hay harvested at bloom stage was much lower than that of hay harvested at late boot and heading stage. In conclusion, mower conditioning can enhance the field drying rate of grass hay, however the drying efficiency of chemical drying agent is very low. Also the effects of chemical/mechanical combined conditioning are very similar compared with mechanical conditioning alone. Harvesting at late boot to heading stage is recommended for the production of high quality hay.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.21 no.2
• /
• pp.67-74
• /
• 2001

A field experiment was carried out to determine the effects of chemical/mechanical treatments at mowing on the field drying rate and hay quality of alfalfa(Medicago sativa L., cv. Vernal) and spring oats(Avena satvia L., cv. Swan). The chemical drying agent of 2% $K_2CO_3$, mechanical mower conditioning, and no treatment(control) were treated for hastening hay-making in the spring of 1997. The forages were harvested at early bloom stage in alfalfa and heading stage in oats. After field dry, square bales were made by hay baler, and the dry matter(DM) loss, visual estimation and nutritive value of hay were evaluated after storing two months. The field drying rates of alfalfa and oats were high at mechanical treatment, but the drying effectiveness of chemical agents alone was very low. With mower conditioning, the duration of field dry was shortened by 1 day compared with control. therefore, mower conditioning enhance the field drying rate of alfalfa and oats. The DM loss of alfalfa and oats hay was reduced by mechanical treatment, but the efficiency by chemical alone was low. The visual score(leafiness, green color, odor and softness) of hay at mechanical treatment was slightly higher than that of chemical and control. The nutritive value(ADF, NDF, in vitro digestibility, and relative feed value) of hay was also high with treatment of mechanical, but those of chemical alone were similar compared with control. The nutritive value of hay after two months in both alfalfa and oats was decreased when compared with at harvest.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.39 no.3
• /
• pp.171-177
• /
• 2019

Hay-making is one of the most common way for forage preservation in livestock industry. The quality and production of hay could be affected by various factors. This experiment was conducted to investigate the effect of tedding time and frequency on drying rate and feed value of forage rye (Secale cereale L.) hay. Rye was harvested on heading stage using mower conditioner. Hay was tedded at each set hour(09:00, 13:00 and 17:00) and sampled at each set hour to determine dry matter (DM) content. After two months' preservation, CP (crude protein), ADF (acid detergent fiber), NDF (neutral detergent fiber), IVDMD (in vitro dry matter digestibility), TDN (total digestible nutrient), RFV (relative feed value), DM loss, visual scores and total fungi count were determined for estimation of hay quality. Tedding was necessary for both speeding up drying rate and improving forage quality. Tedding at 17:00 showed lower NDF content (p<0.05), and also higher RFV value was found compared with tedding at 9:00 and 13:00 (p<0.05). On the other hand, it was observed that more DM losses would be found when tedding later (p<0.05). Tedding in 1~3 times per day were lower in ADF and NDF content (p<0.05), increased CP, TDN and RFV (p<0.05), got less DM loss (p<0.05), and contained less fungi during conservation compared with no tedding (p<0.05). On the other hand, tedding too frequent caused more DM loss (p<0.05). In conclusion, for shorter drying process and higher quality of forage rye hay, tedding at 13:00~17:00 for 1~2 times per day was recommended in this study.

• Journal of Animal Science and Technology
• /
• v.63 no.2
• /
• pp.354-366
• /
• 2021

Limited data about the effects of various factors on forage quality and β-carotene content of rye produced in Korea are available, so this study investigated the effects of two preservation methods. Samples were collected from rye harvested every 5 days between April 25 and May 31, and comparisons were done among rye silage wilted for different periods of time and hay of three growth stages of rye. For the silage, dry matter (DM), acid detergent fiber (ADF), and neutral detergent fiber (NDF) contents increased with advanced maturity of rye, whereas crude protein, in vitro dry matter digestibility (IVDMD), total digestible nutrients (TDN), relative feed value (RFV), and DM loss decreased (p < 0.0001). Wilting increased the DM content and pH value significantly (p < 0.0001). Silage harvested at the heading stage had the lowest pH value (4.45), propionic acid (0.83 g/kg DM), butyric acid (0 g/kg DM), and fungi and yeast populations (3.70 Log CFU/g of fresh matter [FM]); conversely, it had the highest lactic acid (9.7 g/kg DM), lactic acid bacteria (LAB) (6.87 Log CFU/g of FM), total microorganisms (TM) (7.33 Log CFU/g of FM), and Flieg's score (70) (p < 0.0001). Wilting elevated LAB and TM populations, but it had no consistent effect on other fermentation products. Both delayed harvest and prolonged wilting decreased β-carotene content. Rye silage harvested around May 9 (heading stage) with 24 h of wilting was preferred for highland, Pyeongchang. For rye hay, advanced maturity decreased DM loss, IVDMD, TDN, and RFV, but it increased DM, ADF, and NDF significantly (p < 0.05). β-carotene was decreased by delay of hay-making. Consequently, to attain lower DM loss and higher hay quality, the harvest date of May 9 (heading stage) is recommended.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.19 no.3
• /
• pp.251-258
• /
• 1999

A field experiment was carried out to determine the effects of chemical /mechanical treatments at mowing on the field drying rate and hay quality of rye (Secale cereale L.). The chemical drying agent/mower conditioner ($K_2CO_3$ 2%, conditioning, $K_2CO_3$ 2% + conditioning and control) were treated at different harvest stage (late boot, heading and bloom stage) for hastening hay-making in the spring of 1996. After field dry, square bales were made by hay baler, and the dry matter(DM) loss, visual estimation and nutritive value of rye hay were evaluated after storing two months. The field drying rate of rye was higher with delayed stage of harvest, and mechanical and chemical + mechanical treatment, but the effectiveness of chemical alone was very low. With mower conditioning, the duration of field dry was shortened by 1.5 to 2 days compared with control. The DM loss of rye hay was reduced by late harvest and mechanical, and chemical + mechanical combined treatment, but the efficiency by chemical alone was very low. The visual score (Ieafiness, green color, odor and softness) of hay after storing was high in mechanical and chemical + mechanical, but the score by chemical alone was very low. The nutritive value (ADF, NDF, digestibility, and relative feed value) of hay was also high with treatment of mechanical and chemical + mechanical, but the quality by chemical alone was similar compared with control. The quality of hay was very low when harvested at bloom stage. In conclusion, mower conditioning can enhance the field drying rate of rye, but the drying effectiveness of chemical drying agent was very low. The effect of chemical/mechanical combined treatment was very similar when compared with mechanical alone. Harvest at early heading to heading stage was recommended for high quality rye hay.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.37 no.4
• /
• pp.372-376
• /
• 1992

This experiment was conducted to determine hay making time on the drying period, hay moisture content, hay loss content, yield and forage quality of Italian ryegrass in paddy field. Plant height increased rapidly from middle of April, and leaf weight rate were 55.6% at April 20 and 18.9% at May 30. Moisture content and loss content of hay were 17.1-20.5% and 10.2-15.0%, respectively, at drying for 4 days from May 10 to May 30. As the growth stage later, crude protein, fat and ash contents reduced, but crude fiber and NFE contents increased. Dry matter and TDN yield at the cutting of May 20 and May 30 increased to 17-18% and 5-11%, respectively, than those of April 20＋May 30.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.18 no.4
• /
• pp.323-328
• /
• 1998

A field experiment was carried out to determine the effects of chemical and mechanical treatment at mowing on the field drying rate and hay quality of autumn oat (Avena sativa L.). The chemical drying agent/mower conditioner ($K_2CO_3$ 2%, conditioning, $K_2CO_3$ 2% + conditioning and control) were treated at different harvest stages (late boot, heading and bloom stage) for hastening hay manufacture in the autumn of 1996. After field dry, square bales were made by hay baler, and the dry matter(DM) loss and visual estimation of oat hay were evaluated after storing two months. In general, the field drying rate of oat was slow, regardless of harvest stage. Mechanical and chemical + mechanical treatment were effective, but the effectiveness of chemical alone was very low. With mower conditioning, the duration of field dry was shortened by 2 days compared with control. The DM loss of hay was higher at boot stage(51.4%) than at heading stage (21.1%), and the DM loss was reduced by mechanical and chemical + mechanical combined treatment. The visual score (leafiness, green color, odor and softness) of hay after storing was high in mechanical and chemical + mechanical, but the score by chemical alone was very low. The nutritive value (ADF, NDF, digestibility, and relative feed value) of hay was also high with treatment of mechanical and chemical + mechanical, but the quality by chemical alone was similar compared with control. In conclusion, mower conditioning can enhance the field drying rate of autumn oat, but the drying efficiency of the chemical drying agent was very low. However, it is suggested that hay-making of oat in autumn is very hard though using mower conditioner.

• The Journal of the Korea Contents Association
• /
• v.12 no.12
• /
• pp.447-458
• /
• 2012

The purpose of this paper is to introduce a design method to making characterized street for city regeneration and strategy for regional activation through making characterized street. For this purpose we analyze a case of 'Bosu-dong Book Street' in the city of Busan with compared to the cases of 'Hay on wye' in UK and 'Kanda old book street' in Japan. We have some suggestions from this analysis as follows; 1. Connection with tourism and publication industry is needed for regional economic vitality and urban regeneration. And Both of Softwares and Hardwares those are based on local identity are needed to be developed as contents of the street, 2. Merchants and Residents have to take the leading part and public authority is need to support them as street makers. 3. Sustainable participation and efforts of the community leaded by merchants and residents are needed in the whole process of making characterized street such as making, operating and management of hardware & software.

• KIEAE Journal
• /
• v.15 no.6
• /
• pp.47-56
• /
• 2015

Purpose and Method: Despite benefits of building energy simulations, practitioners seem to be reluctant to use simulations for design decision making. By means of survey and interviews, this study aims to investigate domestic hindrance against increasing simulation usability, and to collect user requirement to enhance technical functionality of the simulation. Also this study compares the Information Sharing Workflow by Stantec and general domestic design process in order to identify a direction of the Integrated Design Process. Result: Finally this study wraps up with suggestions of how simulation functionality and use protocol should be in order to satisfy user requirement and also to gather more users.