• The Korean Journal of Mycology
• /
• v.45 no.3
• /
• pp.188-195
• /
• 2017

Despite the high commercial value of the pine mushroom (Tricholoma matsutake) around the world, its production still depends upon natural harvesting. In recent years, mushroom researchers in Korea and Japan have been successful in artificially cultivating T. matsutake by producing single mushroom through matsutake-infected pine seedlings. In this study, we determined the minimum seedling height required for the survival of matsutake mycelia in the infected pine seedlings in the field. The survival rate of matsutake mycelia in the matsutake-infected pine seedlings was 50% (14) in two years and 71% (10) in one year after their transplantation. The average height at time of transplantation of the matsutake-infected pine seedlings that bore surviving mycelia after transplantation was 25 cm (minimum 12 cm to maximum 40 cm). In conclusion, the matsutake mycelium of matsutake-infected pine seedlings was able to survive in field conditions if the height of the seedling at the time of T. matsutake infection was at least 12 cm. These results suggest that the height of the host plants used in conventional matsutake-infected pine seedling production should be greatly reduced to improve the matsutake cultivation. Therefore, standardization of the seedling height for artificial cultivation of pine mushrooms by the matsutake-infected pine seedling method is suggested.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.46 no.3
• /
• pp.117-129
• /
• 2018

With the changing of social needs and paradigms, citizens are concerned about aesthetic and cultural community gardens from productive urban farms in Korea. It is still difficult, however, to cultivate a beautiful garden with a community to design, install and manage it. Therefore, this study analyzed the community garden design guidelines of other countries to derive the characteristics and implications. The research method analyzed six guidelines for community garden design in the UK, Canada, the USA, Australia and Japan. As a result of the study, most community garden design guidelines are opened freely via on-line service. The guidelines are composed with chronological processes such as intro, site selection, design, construction and maintenance. The introduction section treats definition, purpose, meaning, efficiency and success factors for community gardens. Site selection emphasizes site conditions (soil, light, shadow, water, etc.), landholding and insurance. The design section, however, lacks adequate drawings and case images. These guidelines offer little explanation with few illustrations and sentences. Construction sections explain about plantings, facilities, expense and details. The maintenance guidelines of community gardens contain how to control members, funding, harvesting, pests and plants. In addition, some guidelines include vandalism, organic cultivation methods, recording and advertisement. Lastly, the appendix contains a variety of checklists, administrative documents, guidelines, drawings, and contacts. This study will help understand the trends and characteristics of overseas community gardens design guidelines so as to also supply directions for guidelines to be introduced in Korea.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.25 no.1
• /
• pp.87-92
• /
• 2017

Objective of this experiment was to evaluate the effect on pepper growth to application of biochar pellet in case of development of soil carbon sequestration technology. The treatments consisted of control as a general agricultural practice method, pellet (100% pig compost), biochar pellets with mixture ratio of pig compost (9:1, 8:2, 6:4, 4:6, 2:8) for comparison of total carbon contents, $NH_4-N$ concentrations, and total biomass in the pots applied with biochar pellets after pepper harvesting. The application rates of biochar pellet was 8.8 g/pot regardless of their mixed rates based on recommended amount of application (440 kg/10a) for pepper cultivation. For the experimental results, Total carbon contents in the treatments were low from 1.8 to 2.6 fold as compared to the control. $NH_4-N$ concentrations were not significantly different among the treatment plots as compared to the control, but $NO_3-N$ was not detected in the all treatment plots. However, total biomass was not only significantly different between the control and 2:8 (biochar : pig compost) biochar pellet application plot even if the other treatments were low. Therefore, this biochar pellet application might be further modified for soil carbon sequestration in agricultural farming practices.

• Journal of Bio-Environment Control
• /
• v.5 no.2
• /
• pp.187-193
• /
• 1996

This experiment was conducted to investigate the influence of temperature variation by the different ventilation methods on the growth and quality of oriental melon in greenhouse of tunnel type 1. The dropping effect in temperature by ventilation types was best at type 3 and those of type 2, type 1 were in order. 2. The temperature distribution in type 3 was uniformed as air- inflow and air- outflow by wind ventilation were easier than others. Whereas the temperature of type 1 having lateral ventilation hole and type 2 having the zenith ventilation tube and lateral ventilation hole was ascended, because small ventilation area of ventilation tube and hole could not make the gravity and wind ventilation successfully. 3. When compared with air amount of three types ventilated by the temperature difference of outside and inside of tunnel type house, that of type 3 was more than those of type 1 and type 2. 4. Type 3 was better than type 2 and type 1 in lear numbers, leaf area, fruit weight, flesh thickness, malformed fruit rate, and marketable fruit rate. 5. Marketable fruit rate of all treatment at each harvesting stages was rised, as goes to the latter periods.

• Journal of Applied Biological Chemistry
• /
• v.61 no.1
• /
• pp.1-8
• /
• 2018

The objective of this study was to compare the antihyperlipidemic effects of different Dendropanax morbifera leaf extracts in vitro. The extracts differed in terms of specimen age, harvesting season, and extraction method. RAW 264.7 cells were pretreated with these extracts and stimulated by oxidized low-density lipoprotein. Ethanol was used to induce toxicity in HepG2 cells. Cellular lipid accumulation was quantified using oil red O staining in both these cells. The extracts were evaluated for their inhibitory effects on 3-hydroxy-3-methylglutaryl coenzyme A (HMG-CoA) reductase. RAW 264.7 cells treated with the 60% ethanol extract of an 8-year-old specimen harvested in November exhibited the lowest lipid accumulation. The 30% ethanol extract of a 5-year-old specimen harvested in May exhibited the greatest protection from ethanol-induced cytotoxicity in HepG2 cells. The hot water extract of an 8-year-old specimen harvested in May showed the greatest inhibition of HMG-CoA reductase. These results showed that D. morbifera extracts prepared from leaves that are harvested in May possess the highest antihyperlipidemic effects.

• Korean Journal of Food Science and Technology
• /
• v.43 no.5
• /
• pp.577-582
• /
• 2011

Greenhouse satsuma mandarins (Citrus unshiu Marc., cv. Gungchun) of an early harvesting cultivar were treated by hot water showering at 65$^{\circ}C$ for 10 s at a commercial scale in a packing house and then stored at 5$^{\circ}C$ for 3 weeks and subsequently at 18$^{\circ}C$ for 1 week (simulated shelf-life) to examine the potential use of hot water treatment (HWT) as an environmentally benign method to maintain mandarin quality characteristics during postharvest storage and sale. The respiration rate just after heat treatment or during storage was at a similar level in both the treated and untreated fruit. HWT also had no detrimental effects on quality attributes including pH, titratable acidity, soluble solids content, weight loss, firmness, and peel color. The development of stem-end rot, mold decay, and black rot was lower in the heat-treated fruit compared to those in the untreated control. A sensory evaluation showed that HWT markedly improved fruit appearance, making the fruit cleaner and glossier. The results suggested that HWT can be applied to satsuma mandarin as an effective pretreatment to maintain postharvest quality during storage and marketing.

• Journal of Forest and Environmental Science
• /
• v.33 no.3
• /
• pp.202-225
• /
• 2017

Non Timber Forest Products (NTFPs) has gained a lot of significance over the years as a means of income generation. Forests are playing a vital role in the supply of these products, however, due to their continuous extraction, the population of many species might have depleted. Very little information is known about community structure and population status of NTFPs. No specific studies have been made to find out the occurrence, availability of species and population status in the forests, supplying the resources. The present study has been carried out in community forests of the naturally occurring NTFPs in the temperate forest of the Ziro valley of Arunachal Pradesh. The main aim is to determine community structure, species composition and population status of NTFPs. Three forest stands viz., Nyilii, Dura and Gyachi were selected which are used by the Apatani tribe for extraction of the NTFPs. For evaluation of species composition and community characteristics, the sampling of the vegetation was done using the quadrat method. A total 137 species representing 68 families and 116 genera were recorded. Herbs represent the maximum diversity with 71 species followed by 35 shrub species and 31 tree species. The families Asteraceae and Rosaceaeae exhibited maximum representation followed by Urticaceae. The species under Fagaceae, Lauraceae, Rosaceae and Rutaceae were found to be important NTFP yielding species. Highest species richness was recorded in Nyilii having 124 species, while lowest in Dura with 102 species. Density of tree, shrub and herb ranged between 376 to $456\;individuals\;ha^{-1}$, 2848 to $3696\;individuals\;ha^{-1}$ and 31.44 to $36.64\;individuals\;m^{-2}$, respectively. The total basal area was found to be highest ($51.64m^2\;ha^{-1}$) in Dura followed by Nyilii ($25.32m^2\;ha^{-1}$) and lowest in Gyachi ($22.82m^2\;ha^{-1}$). In all the three study stands the species diversity indices showed the trend, herbs > shrubs > trees while the evenness index showed the trend as shrubs > herbs > trees. The overall species similarity index was highest (82.35%) between Dura and Gyachi. About 80% of the total recorded species showed clumped distribution while, no regular distribution was shown by any species. The three selected stands harbor about 50 important NTFP yielding species which are being used commonly by the Apatani people in their day to day life. Among the three study sites, overall diversity of NTFP was found highest in the Nyilii stand while the density of population was found better in Dura and Gyachi stands. The population of many species was found to be low due to continue harvesting without any sustainable management by the communities. All the selected forest stands have the potentiality to grow the high value NTFP yielding species and if managed properly, they can support the livelihood and economy of the local communities.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.25 no.7
• /
• pp.511-515
• /
• 2012

A road energy harvester was designed and fabricated to convert mechanical energy from the vehicle load to electrical energy. The road energy harvester is composed of 24 piezoelectric cantilevers and a vehicle load transfer mechanism. Applying a vehicle load transfer mechanism rather than directly installing energy harvesters under roads decreases the area of road construction and allows more energy harvesters to be installed on the side of the road. The power generation amount with respect to the vehicular velocity change was assessed by installing the vehicle load transfer mechanism and the energy harvester in the form of speed bumps and underground. The energy harvester installed in a speed bump form generated power of 7.61 mW at the vehicular velocity of 20 km/h. Also, power generation of the energy harvester installed in the underground form was 63.9 mW at the vehicular velocity of 28 km/h. Although the number of piezoelectric cantilevers was reduced by 1/3 to 24 in comparison to the previous research results with 72 piezoelectric cantilevers, similar power generation characteristic value was obtained within the vehicular velocity of 20 km/h by altering the vehicle load transfer mechanism and cantilever vibration method.

• Archives of Reconstructive Microsurgery
• /
• v.6 no.1
• /
• pp.73-79
• /
• 1997

Complete denervation after severe brachial plexus injury make significant muscle atrophy with loss of proper function. It is much helpful to reconstruct the essential function of the elbow flexion movement in patient with total loss of elbow flexion motion after brachial plexus lesion which was not recovered with nerve surgery or long term conservative treatment from onset. In whole arm type brachial plexus injury, if there were no response to neurotization or neglected from injury, the volume of the denervated muscle is significantely reduced month by month. About 18 months most of the muscle fibers change to fibrous tissues and markedly atrophied irreversibly, further waiting is no more meaningful from that period. Authors performed 14 cases of functioning gracilis muscle transfer from 1981 to 1995 with microneurovascular technique, neuromusculocutaneous free flaps were performed for reconstruction of lost elbow flexion function. Average follow-up period was 5 years and 6 months. We used couple of intercostal nerves as a recipient nerve which were anastomosed to muscular nerve from obturator nerve in all cases. Recipient vessels were three deep brachial artery and eleven brachial artery which were anastomosed to medial femoral circumflex artery with end to end or end to side fashion. Average resting length of the transplanted gracilis were 24 cm. We can get average 54 degree flexion range of elbow with fair muscle power from flail elbow. There were one case of muscle necrosis with lately developed thrombosis of microvascular anastomosed site which comes from insufficient recipient arterial condition, 3 cases of partial marginal necrosis of distal skin of the transplanted part which were not significant problem with spontaneously solved with time goes by gracilis muscle has constant neurovascular pattern with relatively easy harvesting donor with minimal donor morbidity. Especially it has similar length and shape with biceps brachii muscle of upper arm and longer nerve pedicle which can neurorrhaphy with intercostal nerve without nerve graft if sufficient mobilization of the nerves from both sides of gracilis and intercostal region. Authors can propose gracilis muscle transplantation with intercostal nerves neurotization is helpful method with minimal donor morbidity for neglected brachial plexus palsy patients.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.322-322
• /
• 2017

To avoid drought stress under rainfed upland conditions, it is important for rice to efficiently utilize water at shallow soil layers supplied by rainfall, and access to water retained in deer soil layers. The root developmental characteristics of rice, which play important role in the adaptability to drought conditions, vary depending on the variety. Moreover, water availability for plant differs depending on the soil types that have different physical properties such as water holding capacity, permeability, capillary force, penetration resistance, etc. In this study, we evaluated growth and yield responses of rice varieties to various soil water deficit conditions under three different soil types. The experiment was conducted in a plastic greenhouse at the Kenya Agricultural and Livestock Research Organization-Mwea from October 2016 to January 2017. Two upland varieties (NERICA 1 and 4) and one lowland variety (Komboka) were grown in handmade PVC pots (15.2 cm diameter and 85.0 cm height) filled with three different types of soil collected from major rice-growing areas of the country, namely black cotton (BC), red clay (RC), and sandy clay (SC). Three watering methods, 1) supplying water only from the soil surface (W1), 2) supplying water only from the bottom of the pots (W2), and 3) supplying water both from the soil surface and the bottom of pots (W3), were imposed from 40 days after sowing to maturity. Soil water content (SWC) at 20, 40, and 60 cm depths was measured regularly. At the harvesting stage, aboveground and root samples were collected to determine total dry weight (TDW), grain yield, and root length at 0-20, 20-40, 40-60, and 60-80 cm soil layers. Irrespective of the watering methods, the greatest root development was obtained in RC, while that in BC was less than other two soils. In BC, the degree of yield reduction under W1 was less than that in RC and SC, which could be attributed to the higher water holding capacity of BC. In RC, the growth and yield reduction observed in all varieties under W1 was attributed to the severe drought stress. On the other hand, under W2, SWC at the shallow soil depth in RC was maintained because of its higher capillary force compared with BC and SC. As the result, growths and yields in RC were not suppressed under W2. In SC, deep root development was not promoted by W2 irrespective of the varieties, which resulted in significant yield losses. Under W1, the rice growth and yield in SC was decreased although shallow root development was enhanced, and the stomatal conductance was maintained higher than RC. It was suspected that W1 caused nutrients leaching in SC because of its higher permeability. Under rainfed conditions, growth and yield of rice can be strongly affected by soil types because dynamics of soil water conditions change according to soil physical properties.