• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2014년도 전력전자학술대회 논문집
• /
• pp.431-432
• /
• 2014

Recently, the demand of LED(light-emitting diode) lighting is gradually enlarged by governmental saveenergy policy, which the LED lighting has been established compulsorily in new buildings, public institutions, and residential installations etc.. The LED lighting is driven by SMPS (switching mode power supply). The SMPS requires high efficiency because the SMPS changes a commercial ac power source to low voltage dc power source. Harmonic components that occur in the conversion process of SMPS decrease system power factor and deal great damage in electric power system. To improve such problems, this paper proposes a SMPS of high efficiency. The switching devices in the proposed SMPS are operated by soft switching technique using a new quasi-resonant circuit. The input ac current waveform in the proposed SMPS becomes a quasi-sinusoidal waveform proportional to the magnitude of input ac voltage under constant switching frequency. As a result, the proposed SMPS obtains low switching power loss and high efficiency, and its input power factor is nearly in unity.

• Journal of Power Electronics
• /
• 제18권6호
• /
• pp.1642-1649
• /
• 2018

A single-stage flyback LED AC-DC converter based on primary-side control under constant current mode is proposed in this study. The proposed converter features low total harmonic distortion (THD) and high power factor (PF). It also consists of a zero-crossing distortion compensation circuit and a variable duty ratio control compensation circuit to deal with the line current distortions caused by fixed duty ratio control. The system model and layout are built in Simplis and Cadence, respectively. The feasibility and performance of the proposed circuit is verified by designing and fabricating an IC controller in the HHNEC $0.35{\mu}m$ 5 V/40 V HVCMOS process. Experimental results show that the PF can reach a level in the range of 0.985-0.9965. Moreover, the average THD of the entire system is approximately 10%, with the minimum being 6.305%, as the input line voltage changes from 85 VAC to 265 VAC.

• Bulletin of the Korean Chemical Society
• /
• 제18권1호
• /
• pp.56-61
• /
• 1997

Lead zirconate titanate (PZT) thin fills were deposited onto the Pt/Ti/SiO2/Si substrate by the pulsed laser deposition with the second harmonic wavelength (532 nm) of Nd:YAG laser. In order to determine the optimum conditions for the film deposition, the phase of the films were investigated as functions of ambient oxygen pressure, substrate temperature, and laser fluence. Also the chemical composition analysis was conducted for the PZT films deposited under various ambient oxygen pressure. When the distance between substrate and bulk PZT target is set to 20 mm, the optimum conditions have been determined to be 3 torr of oxygen pressure, 1.5 J/cm2 of laser fluence, and 823-848(±10) K range of substrate temperature. At these conditions, perovskite phase PZT films were obtained on platinized silicon. The chemical composition of the films is very similar to that of PZT bulk target. The physical structure of the deposited films analyzed by scanning electron microscopy shows a columnar morphology perpendicular to the substrate surface. Capacitance-Voltage hysteresis loop measurements show also a typical characteristics of ferroelectric thin film. The dielectric constant is found to be 528 for the 0.48 μm thickness of PZT thin film.

• Bulletin of the Korean Chemical Society
• /
• 제4권5호
• /
• pp.223-227
• /
• 1983

A molecular dynamic computer experiment was performed on a system of 108 particles composed of a single polymer chain and solvent molecules. The state considered was in the immediate neighborhood of the triple point of the system. The polymer itself is an analog of a freely jointed chain. The Lennard-Jones potential was used to represent the interactions between all particles except for that between the chain elements forming a bond in the polymer chain, for which the interaction was expressed by a harmonic potential. The self-diffusion coefficient and velocity autocorrelation function (VACF) of a polymer were calculated at various chain lengths $N_p$, and various interaction strengths between solvent molecules and a polymer chain element. For self-diffusion coefficients D, the Einstein relation holds good; as chain length $N_p$ increases the D value decreases, and D also decreases as ${\varepsilon}_{cs}$ (the interaction parameter between the chain element and solvent molecules) increases. The relaxation time of velocity autocorrelation decreases as ${\varepsilon}_{cs}$ increases, and it is constant for various chain lengths. The diffusion coefficients in various conditions reveal that our systems are in a free draining limit as is well known from the behavior of low molecular weight polymers, this also agrees with the Kirkwood-Riesman theory.

• 전산구조공학
• /
• 제10권3호
• /
• pp.175-184
• /
• 1997

본 논문의 목적은 부등침하를 받는 회전 쉘의 최대 응답과 표준편차와의 관계를 규명하는 것이다. 이를 위해 표준편차에 대한 최대응답의 비(.eta.)및 그 개략값(.eta./sub apr/)를 통계적 수법으로 조사하였다. 또한 탁월차수(predoninant harmonic number)의 함수로 표현되는 .eta./sub apr/을 구하기 위한 식을 제안하였다. 한편 침하는 Fourier급수로 표시하였다. 이때 각 항은 2개의 계수를 포함하게 되는데 하나는 진폭 스펙트럼이고 다른 하나는 위상각이다. 여기서는 위상각은 확률변수로, 진폭은 확정값으로 가정하였다. 해석에서는 .eta., .eta./sub apr/의 특성을 조사하기 위해 2가지 type의 진폭 스펙트럼을 실측데이터를 근거로 설정한 후, 각 type에 대해 100 sample씩의 위상각을 가정하여 사용하였다. .eta.,.eta./sub apr/은 응답의 종류, 쉘의 위치 그리고 진폭 스텍트럼의 type에 상관없이 거의 일정한 값으로 분포하며 그 값은 2.0에서 2.5사이의 값이 된다. 또한 .eta./sub apr/의 값은 .eta.의 값과 거의 비슷하지만 약간 큰 값으로 나타났다. 결론으로 부등침하를 받는 회전 쉘의 최대 응답은 표준편차의 .eta./sub apr/(약 2.5)배 임을 밝히고 있다.

• 한국해안·해양공학회논문집
• /
• 제22권5호
• /
• pp.316-325
• /
• 2010

황해중부해역에 설치된 황해 모니터링 부이에서 관측한 기온과 표층수온의 변동성분을 추출하기 위하여 조화분석을 수행하였다. 분석결과, 기온과 표층 수온 모두 1년, 반년 주기성분이 가장 우세한 것으로 파악되었으며, 보다 짧은 주기성분은 $0.2{\sim}0.5^{\circ}C$ 이하의 작은 변동성분에만 기여하는 것으로 파악되었다. 한편, 기온과 표층수온의 조화분석 성분에서 추출한 잔차성분을 분석한 결과, 기온 잔차성분의 표준편차는 표층 수온 잔차성분의 표준편차보다 2.4배 정도 크고, 잔차성분의 발생빈도분포는 정규분포로 근사화하는 것이 가능한 것으로 파악되었다. 한편, 기온에 따른 표층수온 변화양상을 기온-표층수온 평면에서 분석한 결과 뚜렷한 연속적인 이력고리(hysteresis loop)를 형성하는 것이 발견되었으며, 반시계방향의 기온-표층수온 상승기, 기온-표층수온 하강기 그리고 동계 일정한 표층수온 유지기로 구성되어 있는 것으로 파악되었다.

• 한국결정성장학회지
• /
• 제7권3호
• /
• pp.349-358
• /
• 1997

비선형 광학 유기물질 meta-Nitroaniline(mNA)의 고품질 단결정을 과냉법을 사용하여 성장시키는데 처음으로 성공 하였다. 정제한 mNA를 녹인 뒤, 0.1 K의 일정한 과냉각 상태에서 종자 결정을 도입하여 하루 동안 크기가 약 $20{\times}15{\times}15 \textrm {mm}^3인 우수한 품질의 단결정을 성장시켰다. 성장된 결정의 전체적인 외형상 특징은 한쪽 방향으로만 성장했다는 것이다. 성장한 방향으로는 잘 발달된 {111}면과 {021}면으로 형성되어 있으나, 성장하지 않을 반대쪽 방향으로는 결정면이 생기기 않았다. 결정 성장이 이루어지는 방향은 파이로 전기적 방법으로 측정한 결과, [001] 방향으로 판명되었다. 성장된 결정의 결함 구조 특성은 싱크로트론 X-선 topography를 이용하여 조사하였으며, 비선형 광학 특성은 2차 조화파 변환 효율 및 광손상 문턱 값 측정으로 조사하였다.

• Smart Structures and Systems
• /
• 제19권6호
• /
• pp.665-678
• /
• 2017

In this paper the tuned mass-damper-inerter (TMDI) is considered for passive vibration control and energy harvesting in harmonically excited structures. The TMDI couples the classical tuned mass-damper (TMD) with a grounded inerter: a two-terminal linear device resisting the relative acceleration of its terminals by a constant of proportionality termed inertance. In this manner, the TMD is endowed with additional inertia, beyond the one offered by the attached mass, without any substantial increase to the overall weight. Closed-form analytical expressions for optimal TMDI parameters, stiffness and damping, given attached mass and inertance are derived by application of Den Hartog's tuning approach to suppress the response amplitude of force and base-acceleration excited single-degree-of-freedom structures. It is analytically shown that the TMDI is more effective from a same mass/weight TMD to suppress vibrations close to the natural frequency of the uncontrolled structure, while it is more robust to detuning effects. Moreover, it is shown that the mass amplification effect of the inerter achieves significant weight reduction for a target/predefined level of vibration suppression in a performance-based oriented design approach compared to the classical TMD. Lastly, the potential of using the TMDI for energy harvesting is explored by substituting the dissipative damper with an electromagnetic motor and assuming that the inertance can vary through the use of a flywheel-based inerter device. It is analytically shown that by reducing the inertance, treated as a mass/inertia-related design parameter not considered in conventional TMD-based energy harvesters, the available power for electric generation increases for fixed attached mass/weight, electromechanical damping, and stiffness properties.

• 한국항행학회논문지
• /
• 제12권2호
• /
• pp.122-131
• /
• 2008

본 논문에서는 마이크로스트립 헤어핀 형태의 링 공진기를 이용하여 저위상 잡음을 개선한 소형화된 S 대역에 사용가능한 발진기를 설계 및 제작하였다. 기판은 고조파 특성이 우수한 유전율 ${\varepsilon}_r$=3.5 기판두께 h=20mil 금속두께 t=17um 손실 탄젠트 $tan{\delta}$=0.0025 인 TACONIC사의 RF-35를 사용하였다. 측정된 결과 발진 주파수는 2.45 GHz에서 출력전력은 20.9 dBm으로서 기존의 발진기에 비하여 상당히 높은 출력을 얻었고, 위상 잡음 특성은 100 kHz offset에서 -100.5 dBc/Hz 로서 기존의 발진기 성능과 비교하면 우수한 특성이 있음을 확인할 수 있었고, 고조파 억압 특성은 32 dBc 이상으로서 우수한 특성을 갖는 발진기임을 보여주었다. 본 논문에서 제안된 발진기의 형태를 이용하여 RFIC, MIC, MMIC 형태로 제작한다면 발진기를 소형화할 수 있을 것이며, 이 제작된 발진기는 S-밴드의 주파수원으로 이용 가능할 수 있을 것으로 사료된다.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제49권6호
• /
• pp.411-420
• /
• 2000

The energy storage systems are being widely researched for the high quality of the electric power. The FES(flywheel energy system) is especially, on the center of the research because it does not make any pollution and its life is long. The FES converts the electrical energy into the mechanical kinetic energy of the flywheel and reconverts the mechanical energy into the electrical energy. In order to store as much energy as possible, the flywheel is supposed to be rotated with very high speed. The motor/generator of the FES should be high efficient at high speed, and generate constant torque with respect to the rotation. In this paper, a motor/generator employing a Halbach array of permanent magnets is designed and constructed to meet the requirements, and its characteristics are examined. The magnetic field is analysed by using the magnetic surface charge method. The armature winding is designed for the harmonic components to be minimized by using the FFT. The sinusoidal current for the motor driving are generated by the hysteresis current controller. A sample superconducting flywheel energy storage system is constructed with a duralumin flywheel which has a maximum rotating speed of 40,000[rpm] and a stored energy of 240[Wh] and its validity is examined through the experiment.