• Journal of Welding and Joining
• /
• 제15권1호
• /
• pp.135-148
• /
• 1997

It was attempted to improve wear resistance and durability under the load surface pressure that make a formation of the thick (mm-order) hard-surfacing layer for aluminum alloy of 5083. The thick hard layers were formed on the surface of 5083 by TIG overlay method. Al-(25.4, 33.6, 45.7 mass%) Cu filler metals which were newly developed were overlaid on two base metals forming the one bead, one layer and two layers. The investigation was made on the characteristics of hardening and wear resistance in relation to the microstructure of overlaid layers with selection of optimum overlaying condition.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.11-12
• /
• 2006

Actuator arm of HDD were machined with the slitting saw of tungsten carbide to clarify the cutting characteristics in terms of the roughness of machined surface, the burr size and the tool wear. An improved performance in all view of the surface machined, the tool life and the cutting efficiency was obtained at the cutting speed of 4,000rpm with the feed of 300m/min. The tool life increases with increasing the t/T value, whereas surface roughness decreases. The tool with alternate type of B and C edges has an effect to decrease the burr size.

• 한국정밀공학회지
• /
• 제18권5호
• /
• pp.157-164
• /
• 2001

The grinding for hard-to-machine materials, such as ceramics, super alloys etc., has proven to be a very difficult and consuming process utilizing ordinary methods. In order to conduct high efficiency machining of such materials, grinding processes using metallic bond diamond wheels and applying electrolytic in-process dressing(ELID) have been attempted on a surface grinding machine. In this study, the effects of grinding parameters, and grit sizes have been evaluated in view of surface roughness, grinding force as well as step difference in simultaneous grinding of different materials. The study and experimental results are presented in this paper.

• 연구논문집
• /
• 통권28호
• /
• pp.59-71
• /
• 1998

The ELID(electrolytic in-process dressing) grinding method is a new precision grinding technique with the special electrolytic in-process dressing by metal bonded grinding wheel, fluid, and power supply. It is possible to make a efficient precision machining of hard and brittle materials such as ceramics, hard metals, and quenched steels by using this method, In this study, a new efficient precision grinding method with ELID was attempted for application to the machining and finishing processes of cylindrical structural components. And, we try to develop the cylindrical grinding technique for mirror surface of ceramics, tungsten carbide and SCM steel, and for the high efficiency grinding of machined parts, for example, ball screw shaft. Electrical characteristics of three different wheel grit sizes of #325, #2000 and #4000 were investigated experimentally. ELID grinding method is proved to be useful for mirror surface generation and efficient machining.

• 한국자기학회지
• /
• 제9권5호
• /
• pp.263-270
• /
• 1999

컴퓨터 하드디스크용 윤활제인 PFPE중 Z-DOL과 AM2001을 이용하여 pulling-up speed와 윤활제의 농도를 변화시키면서 윤활제의 두께변화를 알아보았으며, 또한 열처리를 통해 overcoat층인 carbon과 윤활제의 결합특성을 알아보았다. Pulling-up speed가 빠를수록, 그리고 윤활제의 농도가 증가할수록 윤활제의 두께는 두껍게 coating되었음을 알 수 있었으며, 또한 XPS을 이용하여 분석해 본 결과, overcoat층인 carbon에 존재하는 표면 오염물은 C-OH, CO가 지배적이었고, 열처리를 함으로써 overcoat층인 carbon과 윤활제의 결합력이 증진됨을 알 수 있었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.426-427
• /
• 2006

In this paper, the neural network model of the pretilt angle in the nematic liquid crystal on the homogeneous polyimide surface with different surface treatments is investigated. The pretilt angle is one of the main factors to determine the alignment of the liquid crystal display. The pretilt angle is measured to analyze the variation of the characteristics on the various process conditions. The rubbing strength and the hard baking temperature are considered as input factors. Latin hypercube sampling was used to generate initial weights and biases.

• Structural Engineering and Mechanics
• /
• 제66권3호
• /
• pp.285-294
• /
• 2018

An experimental study has been carried out to analyze the effect of cutting parameters (cutting speed, feed and depth of cut) and tool nose radius on the surface roughness and the cutting force components during hard turning of the AISI 52100 (50 HRC) steel with a ceramic cutting tool. The tests have been conducted according to the methodology of planning experiments, based on an orthogonal plan of Taguchi (L27). By using the response surface methodology (RSM), the components of the cutting force and the roughness of the machined surface were modeled and the effects of the input parameters were analyzed statistically by ANOVA and RSM. The results show that the feed (f), the tool nose radius (r), the cutting speed (Vc), the interaction between feed and tool nose radius ($f{\times}r$) as well as that of the quadratic effect ($f^2$) all have significant effects on the surface roughness (Ra). The feed is the most influencing factor with a contribution of 47.31%. The components of the cutting force were strongly influenced by the depth of cut, followed by the advance with a lower degree. By comparing the experimental values with those predicted by the models of the cutting force components and the surface roughness, it appears that they are in very good correlation.

• 공업화학
• /
• 제16권6호
• /
• pp.725-730
• /
• 2005

경조직 대체용 생체재료의 개발에 있어서 재료의 생체적합성 및 골전도성은 가장 중요한 고려사항 중의 하나이다. 인산칼슘 박막은 경조직과 화학적 성분이 매우 유사하기 때문에 재료의 표면에 인산칼슘 박막을 형성함으로써 재료의 생물학적 성질을 매우 증진시킬 수 있다. 생체재료의 성공여부는 재료의 표면에 대한 부착단백질의 작용에 의해 결정되는데, 이는 부착단백질들이 세포의 부착 및 부착된 세포의 생물학적 반응을 유도하기 때문이다. 재료의 표면에 대한 부착단백질들의 흡착기전과 흡착된 입체구조에 따라 조골세포의 부착, 증식, 그리고 분화와 같은 세포반응이 향상되거나 또는 억제된다. 인산칼슘 박막에 의해 개질된 생체재료의 경우 골전도성이 높은 것으로 알려져 있다. 조골세포의 분화 정도가 증가함은 물론 뼈 결절들이 신속하게 형성되는 것이 관찰되었다.

• 대한치과보철학회지
• /
• 제41권1호
• /
• pp.1-19
• /
• 2003

The surface of metals should be as smooth as possible for optimum comfort, oral hygiene, low plaque retention, and resistance to corrosion. In this study five specimens of each precious metal(type III gold alloy, ceramic gold alloy, and Ag-Pd alloy) were divided into five groups according to finishing and polishing procedures : group 1(sandblaster), group 2(group 1+stone), group 3(group 2+brown rubber), group 4(group 3+green rubber), and group 5(group 4+rouge). Six specimens of each non-precious metal(Co-Cr alloy, Ni-Cr alloy, and Co-Cr-Ti alloy) were divided into six groups: group 1(sandblaster), group 2(group 1+hard stone), group 3(group 2+electrolytic polisher), group 4(group 3+brown hard rubber point), group 5(group 4+green hard rubber point), and group 6(group 5+rouge). Considering factors affecting the rate of abrasion, the same dentist applied each finishing and polishing procedure. In addition, the surface roughness of enamel, resin, and porcelain was evaluated. The effect of finishing and polishing procedures on surface roughness of precious and non-precious metals, enamel, resin, and porcelain was evaluated by means of Atomic Force Microscope(AutoProbe CP. Park Scientific Instruments, U.S.A.) that can image the three dimensional surface profile and measure average surface roughness values of each sample at the same time. The obtained results were as follows : 1. According to finishing and polishing procedures, the surface roughness of type III gold alloy, ceramic gold alloy, and Ag-Pd alloy was decreased in the order of group 1, 2, 3, 4, and 5 (P<0.01). 2. According to finishing and polishing procedures. the surface roughness of Co-Cr alloy, Ni-Cr alloy, and Co-Cr-Ti alloy was decreased in the order of group 1, 2, 3, 4, 5, and 6 (p<0.01). 3. There was not statistically significant difference in the surface roughness among three metals of precious metals in group 1 but was significant difference in group 2, 3, 4, and 5 (P<0.05). 4. There was not statistically significant difference in the surface roughness among three metals of non-precious metals in all groups. 5. When the surface roughness of the smoothest surface of each metal, enamel. porcelain, and resin was compared, porcelain was the smoothest and the surface roughness was decreased in the order of Ni-Cr alloy. Co-Cr alloy. Co-Cr-Ti alloy, resin. Ag-Pd alloy, ceramic gold alloy type III gold alloy, and enamel (P<0.01). The results of this study indicate that the finishing and polishing procedures should be carried out in a logical, systematic sequence of steps and the harder non-precious metals may be less resistance to abrasion than are the softer precious metals.

• The Journal of Korean Physical Therapy
• /
• 제15권4호
• /
• pp.13-23
• /
• 2003

The purpose of this study was to evaluate the change of lordosis according to plantar surface compliance in patients with chronic low back pain. Thirty patients with chronic low back pain aged between 20 and 40 were assigned to 3 groups: control group, experimental groups (FHRS group, FSRH group). The lordosis was examined before and after adaptation with corresponding foam types. The results were as follows : 1. As the result of comparing lordosis before and after test of the control group which any change did not exist in plantar surface compliance, there was not a significant difference(p>0.05). 2. As the result of comparing lordosis before and after test of the FHRS group which forefoot part of plantar surface is hard and rear foot part is soft, there was the significant increase(p<0.05). 3. As the result of comparing lordosis before and after test of the FSRH group which forefoot part of plantar surface is soft and rear foot part is hard, there was the significant decrease(p<0.05). 4. As the result of comparing lordosis of the FHRS group and FSRH group, there was not a significant difference before test(p>0.05). But, there was a significant difference after test(p<0.05).