• Journal of Ceramic Processing Research
• /
• v.19 no.6
• /
• pp.472-478
• /
• 2018

In this study, the sintering mechanism of woodceramics (WCs) from cashew nut shell waste (CNSW) was studied by analyzing chemical reactions and structural changes during the sintering process of of CNSW powder, liquefied wood and green bodies of WCs at $900^{\circ}C$ for 60 minutes in the $CO_2$ atmosphere. The chemical and structural properties of the products were investigated by X-ray diffraction (XRD), Raman spectroscopy, Fourier Transform Infrared (FTIR), and scanning electron microscope (SEM). The results showed that the decomposition reactions of liquefied wood and CNSW occurred simultaneously to form the hard carbon and the soft carbon at high temperature. The sintering mechanism of WCs has been presented.

• Journal of radiological science and technology
• /
• v.10 no.1
• /
• pp.13-23
• /
• 1987

Author has studied for finding the method of decreasing the radiation dose and increasing diagnostic range in chest X-ray radiography. The study for the added filter thickness from half value layer to 1/8 value layer by decreasing curve and research for the exposure factors, decreasing ratio of radiation dose, ratio of scatter ray and image quality in chest X-ray radiography. The results were as follows: 1. By using the rare earth intensifying screen system at 120 Kvp, the sensitivity is increased by times and the exposure ratio is decreased 0.22 by comparison with the $CaWO_{4}$ intensifying screen system at 80 Kvp. 2. By using Al added filter of 1/8 value layer, the scatter ray is increased more than no filter, But the scatter ray is decreased more in $G_{4}/RxOG$ intensifying system than in LT-II/Rx intensifying system. 3. At 120 Kvp, the image quality value of $G_{4}/RxOG$ system is increased more than LT-II/Rx system compared with slight decreasing image quality value at 80 Kvp. Concluded that by using the added filter could decrease the radiation dose by 1/3 and obtain effective image quality with the added filter at high voltage hard exposure.

• Korean Journal of Food Science and Technology
• /
• v.36 no.4
• /
• pp.598-603
• /
• 2004

Physicochemical properties of crystalline-structured buckwheat starches cultivated and harvested in Taiwan, China, Korea, and USA were compared. X-ray diffraction pattern showed that all starches were type A as are most natural starches. Moisture contents of starches were 6.30-9.58%, and crude protein contents of Taiwanese and Chinese buckwheats were higher than those of Korean and American ones, whereas Korean and Chinese buckwheats had higher fat contents. Blue-value of Chinese buckwheat was highest at 0.39 and that of Korean buckwheat was lowest at 0.32. Amylose content of American buckwheat was highest at 27.6 and that of Korean buckwheat was lowest. Highest water-binding capacity was shown in Taiwanese buckwheat and lowest in American one. Higher amylase contents in Chinese and American buckwheats reduced expansion and solubility. Highest values of viscosity measured by RVA, breakdown indicating process stability, and setback closely connected to retrogradation of American buckwheat resulted in relatively hard gel.

• Journal of the Korean Society of Radiology
• /
• v.9 no.6
• /
• pp.403-408
• /
• 2015

Hard X-ray has been widely used in medical and industrial fields because it can be applied to observe the inside of a sample. Computed tomography provides sectional images of the sample through the reconstruction of the projection images. The quality of sectional images strongly depends on that of projection images. Ring artifact appeared on the seconal image can be made by the abnormal pixels of the detector used. In this study, we examine the ring artifact ratio in the circle phantom as a function of detection error of the detector used in computed tomography. The ring artifact increased with the increment of detection error under parallel and fan beam geometries and strongly increased near the center of rotation. The corrections, dead pixel and flat field corrections, for the images taken with the detector are required before the image reconstruction process to reduce the ring artifact in the computed tomography.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2001.11a
• /
• pp.29-30
• /
• 2001

This paper presents some results of plasma nitriding on hard chromium deposit. The substrates were C45 steel and $30~50{\;}\mu\textrm{m}$ of chromium deposit by electroplating was formed. Plasma nitriding was carried out in a plasma nitriding system with $95NH_3{\;}+{\;}SCH_4$ atmosphere at the pressure about 600 Pa and different temperature from $450^{\circ}C{\;}to{\;}720^{\circ}C$ for various time. Optical microscopy and X-ray diffraction were used to evaluate the characteristics of surface nitride layer formed by nitrogen diffusion from plasma atmosphere inward iCr coating and interface carbide layer formed by carbon diffusion from substrate outward Cr coating. The microhardness was measured using microhareness tester at the load of 100 gf. Corrosion resistance was evaluated using the potentiodynamic measurement in 3.5% NaG solution. A saturated calomel electrode (SiCE) was used as the reference electrode. Fig.1 shows the typical microstructures of top surface and cross-section for nitrided and unnitrided samples. Aaer plasma nitriding a sandwich structure was formed consisting of surface nitride layer, center chromium layer and interface carbide layer. The thickness of nitride and carbide layers was increased with the increase of processing temperature and time. Hardness reached about 1000Hv after nitriding while 900Hv for unnitrided hard chromium deposit. X-ray diffraction indicated that surface nitrided layer was a mixture of $Cr_2N$ and CrN at low temperature and erN at high temperature (Fig.2). Anodic polarization curves showed that plasma nitriding can greatly improve the corrosion resistance of chromium e1ectrodeposit. After plasma nitriding, the corrosion potential moved to noble direction and passive current density was lower by 1 to 4 orders of magnitude compared with chromium deposit(Fig.3).

• The Journal of Korean Medicine
• /
• v.41 no.3
• /
• pp.151-161
• /
• 2020

Objectives: The purpose of this study is to report the improvement of multiple rib fracture after korean medical treatment; adhesive treatment and herb-medicine treatment. Methods: A patient with multiple rib fracture was treated with Daewhangchija-paste(大黃梔子膏) adhesive and herb-medicine treatment. Verbal numeric rating scale, medical examination by interview and rib series x-ray were used to assess progress of treatment. And we took pictures of left flank after attaching Daewhangchija-paste to observe the changes of the skin colors. Results: Rib series x-ray taken after 2 months of treatment revealed hard callus which added stability against external force on rib cage. After taking off Daewhangchija-paste, left plank skin turned into blue, green and yellow. And the pain level(VNRS) of left plank decreased from 10 to 0.5 for 4 months. Conclusions: Pain reduction on trauma site and improvement of general health condition were observed during combination treatment of Daewhangchija-paste adhesive and herb-medicine.

• The Bulletin of The Korean Astronomical Society
• /
• v.44 no.1
• /
• pp.36.1-36.1
• /
• 2019

We present the observed relationship between Eddington ratio (${\lambda}Edd$) and optical narrow-emission-line ratio ([NII] ${\lambda}6583/H{\alpha}$) of X-ray-selected unobscured active galactic nuclei (AGN) at 0.6 < z < 1.7 using 27 near-infrared spectra from the Fiber Multi-Object Spectrograph mounted on the Subaru telescope along with 26 additional sources from the literature. We show that the ${\lambda}Edd$ and [NII] ${\lambda}6583/H{\alpha}$ ratio at 0.6 < z < 1.7 exhibits a similar distribution of ${\lambda}Edd$-[NII] ${\lambda}6583/H{\alpha}$ anti-correlation that has been found for local ( = 0.036), hard X-ray selected AGN. The observed anti-correlation suggests that [N II] ${\lambda}6583/H{\alpha}$ optical narrow-line ratio in the AGN host galaxy may carry important information about the accretion state of the central supermassive black hole, suggesting the observational hint of consistent relationship from local to z ~ 1.7. Further study is necessary to determine whether the ${\lambda}Edd$-[N II] ${\lambda}6583/H{\alpha}$ correlation in high-redshift still holds at ${\log}{\lambda}Edd$ < -2 compared to local AGN.

• The Bulletin of The Korean Astronomical Society
• /
• v.45 no.1
• /
• pp.62.1-62.1
• /
• 2020

We present a scaling relation between black hole (BH) mass and bulge luminosity for 35 nearby (z<0.1) type 1 active galaxies, selected from the 70-month Swift-BAT X-ray source catalog. Thanks to the unbiased selection and proximity of the parent sample, our sample is suitable to study the physical connection between central black holes and host galaxies. We use the F814W images obtained with the Advanced Camera for Surveys on Hubble Space Telescope, to perform the imaging decomposition with GALFIT. With a careful treatment on the PSF model, we measure the I-band bulge brightness robustly. In combination with the BH mass estimated from a single-epoch spectroscopic data, we present the correlation between BH mass and bulge luminosity of the target AGNs. We demonstrate that our sample marginally lies off from the M(BH)-L(bulge) relation of inactive galaxies. We discuss possible physical origins of this discrepancy. Finally, we present how the relation depends on the photometric properties of AGNs and host galaxies, which may provide an useful insight on the co-evolution between BHs and host galaxies.

• Journal of the Korean Ceramic Society
• /
• v.54 no.6
• /
• pp.511-517
• /
• 2017

With different working pressures and substrate biases, Cr-Al-N coatings were deposited by hybrid physical vapor deposition (PVD) method, consisting of unbalanced magnetron (UBM) sputtering and arc ion plating (AIP) processes. Cr and Al targets were used for the arc ion plating and the sputtering process, respectively. Phase analysis, and composition, binding energy, and microstructural analyses were performed using X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and field emission scanning electron microscopy (FESEM), respectively. Surface droplet size of Cr-Al-N coatings was found to decrease with increasing substrate bias. A decrease of the deposition rate of Cr-Al-N films was expected due to the increase of substrate bias. The coatings were grown with textured CrN phase and (111), (200), and (220) planes. X-ray diffraction data show that all Cr-Al-N coatings shifted to lower diffraction angles due to the addition of Al. The XPS results were used to determine the $Cr_2N$, CrN, and (Cr,Al)N binding energies. The compositions of the Cr-Al-N films were measured by XPS to be Cr 23.2~36.9 at%, Al 30.1~40.3 at%, and N 31.3~38.6 at%.

• Tunnel and Underground Space
• /
• v.23 no.3
• /
• pp.228-240
• /
• 2013

Anisotropy observed in sedimentary rock such as sandstone is mainly caused by existence of bedding consequently influencing on its hydraulic characteristics. The aim of this study is to investigate the influence of locally changing pore structure due to bedding on the hydraulic anisotropy of sandstone, in terms of localized porosity. X-ray CT scan is applied to observe the internal pore structures which is hard to be seen by other experimental methods. Permeability test is also conducted for samples cored at every $15^{\circ}$ from $0^{\circ}$ to $90^{\circ}$ with respect to bedding plane. As a result, the permeability anisotropy is manifest having 1.8 of anisotropy ratio ($k_{90^{\circ}}/k_{0^{\circ}}$) and corresponds with the anisotropy of porosity due to bedding.