• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.1
• /
• pp.274-283
• /
• 2016

The study of maintenance planning is important in military weapon systems because it can improve their availability and reduce the operational and maintenance cost during the total life cycle. In maintenance planning, it is important to determine the preventive maintenance task and its optimal interval. This paper focuses on the hard time task, which is one of the preventive maintenance tasks. A hard time task removes an item or restorative action before some specified maximum age limit to prevent functional failure. The Monte-Carlo simulation model was proposed to help understand the cost effectiveness of a hard time task. In the simulation, various shape parameters of the Weibull distribution and cost ratio of corrective maintenance to preventive maintenance were assumed. Using a Monte-Carlo simulation, a quantified cost saving effect and optimal preventive maintenance interval were suggested.

• Journal of Institute of Control, Robotics and Systems
• /
• v.5 no.2
• /
• pp.145-150
• /
• 1999

A real-time control system, composed of the controlled processor and the controller computer(s), may have a variety of task types, some of which have tight timing-constraints in generating the correct control input. The maximum period of those task failures tolerable by the system is called the hard deadline, which depends on not only fault characteristics but also task characteristics. In the paper, we extend a method deriving the hard deadline in LTI system executing single task. An algorithm to combine the deadlines of all the elementary tasks in the same operation-mode is proposed to derive the hard deadline of the entire system. For the end, we modify the state equation for the task to capture the effects of task failures (delays in producing correct values) and inter-correlation. We also classify the type of executing the tasks according to operation modes associated with relative importance of correlated levels among tasks, into series, parallel, and cascade modes. Some examples are presented to demonstrate the effectiveness of the proposed methods.

• The KIPS Transactions:PartA
• /
• v.9A no.1
• /
• pp.9-18
• /
• 2002

In this paper, we propose scalable scheduling techniques based on EDF to efficiently integrate hard real-time and multimedia soft real-time tasks in the distributed real-time multimedia database system. Hard tasks are guarangteed based on worst case execution times, whereas multimedia soft tasks are served based on mean execution times. This paper describes a served-based scheme for partitioning the CPU bandwidth among different task classes that coexist in the same system. To handle the problem of class overloads characterized by varying number of tasks and varying task arrival rates, thus scheme shows how to adjust the fraction of the CPU bandwidth assigned to each class. This scheme fixes the maximum time that each hard task can execute in the period of the server, whereas it can dynamically change the bandwidth reserved to each multimedia task. The proposed method is capable of minimizing the mean tardiness of multimedia tasks, without jeopardizing the schedulability of the hard tasks. The performance of this scheduling method is compared with that of similar mechanisms through simulation experiments.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.53 no.8
• /
• pp.594-601
• /
• 2004

We analyze checkpoint strategy for multiple real-time periodic tasks with hard deadlines. Real-time tasks usually have deadlines associated with them. For multiple real-time tasks, checkpoint strategy considering deadlines of all tasks is very difficult to derive. We analyze the problem of checkpoint placement for such multiple periodic tasks. In our strategy, the interval between checkpoints is determined for each task considering its deadline. An approximated failure probability over a specified interval is derived. Then the number of checkpoints for each task is selected to minimize the approximated failure probability. To show the usefulness of our strategy, error bound between the exact and the approximated failure probability is estimated, which is revealed to be quite small.

• Journal of Information Technology Services
• /
• v.16 no.3
• /
• pp.103-111
• /
• 2017

The real time scheduling is a key research area in high performance computing and has been a source of challenging problems. A periodic task is an infinite sequence of task instance where each job of a task comes in a regular period. The RMS (Rate Monotonic Scheduling) algorithm has the advantage of a strong theoretical foundation and holds out the promise of reducing the need for exhaustive testing of the scheduling. Many real-time systems built in the past based their scheduling on the Cyclic Executive Model because it produces predictable schedules which facilitate exhaustive testing. In this work we propose hybrid scheduling method which combines features of both of these scheduling algorithms. The original rate monotonic scheduling algorithm didn't consider the uniform sampling tasks in the real time systems. We have enumerated some issues when the RMS is applied to our hybrid scheduling method. We found the scheduling bound for the hard real-time systems which include the uniform sampling tasks. The suggested hybrid scheduling algorithm turns out to have some advantages from the point of view of the real time system designer, and is particularly useful in the context of large critical systems. Our algorithm can be useful for real time system designer who must guarantee the hard real time tasks.

• Journal of Korea Multimedia Society
• /
• v.7 no.7
• /
• pp.886-895
• /
• 2004

In this paper, we propose the dynamic allocation scheme of the CPU bandwidth to efficiently integrate and schedule these tasks in the same system, where multimedia tasks and hard real-time tasks can coexist simultaneously. Hard real-time tasks are guaranteed based on worst case execution times, whereas multimedia tasks modeled as soft real-time tasks are served based on mean parameters. This paper describes a server-based allocation scheme for assigning the CPU resource to two types of tasks. Especially for MPEG video streams, we show how to dynamically control the fraction of the CPU bandwidth allocated to each multimedia task. The primary purpose of the proposed method is to minimize the mean tardiness of multimedia tasks while satisfying the timing constraints of hard real-time tasks present in the system. We showed through simulations that the tardiness experienced by multimedia tasks under the proposed allocation scheme is much smaller than that experienced by using other scheme.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.9
• /
• pp.2235-2246
• /
• 1997

This paper presents an effective heuristic task scheduling algorithm for multiprocessor systems. To execute task scheduling effectively which is defined as an allocation of m's tasks onto n's processors(m > n), several problems almost at NP-hard should be cleaned up. The purpose of the task scheduling obtains the minimum execution time by mapping the tasks on a system topology or reduces the total execution time to give a minimum system topology. In order to solve this problem, in this paper, the task scheduling is done by redefining a task graph to a reconstructed task graph (RTG). An RTG is obtained by merging or copying nodes to equal the number of nodes on each level of the task graph to the number of processors of the system topology and then directly scheduled to the system topology. This method obtains a fast scheduling time and a simple scheduling method, and near-optimal execution time without executing steps such as the refinement step and the duplication step after the task scheduling.

• Journal of KIISE:Computer Systems and Theory
• /
• v.29 no.11
• /
• pp.601-610
• /
• 2002

Intra-task voltage scheduling (IntraVS), which adjusts the supply voltage within an individual task boundary, is an effective technique for developing low-power applications. In this paper, we propose a novel intra-task voltage scheduling algorithm for hard real-time applications based on average-case execution time. Unlike the conventional IntraVS algorithm where voltage scaling decisions are based on the worst-case execution cycles, tile proposed algorithm improves the energy efficiency by controlling the execution speed based on average-case execution cycles while meeting the real-time constraints. The experimental results using an MPEG-4 decoder program show that the proposed algorithm reduces the energy consumption by up to 34% over conventional IntraVS algorithm.

• Journal of Information Processing Systems
• /
• v.7 no.4
• /
• pp.613-626
• /
• 2011

In this paper, we focus on the pinwheel task model with a variable voltage processor with d discrete voltage/speed levels. We propose an intra-task DVS algorithm, which constructs a minimum energy schedule for k tasks in O(d+k log k) time We also give an inter-task DVS algorithm with O(d+n log n) time, where n denotes the number of jobs. Previous approaches solve this problem by generating a canonical schedule beforehand and adjusting the tasks' speed in O(dn log n) or O($n^3$) time. However, the length of a canonical schedule depends on the hyper period of those task periods and is of exponential length in general. In our approach, the tasks with arbitrary periods are first transformed into harmonic periods and then profile their key features. Afterward, an optimal discrete voltage schedule can be computed directly from those features.

• Journal of IKEEE
• /
• v.5 no.2 s.9
• /
• pp.164-173
• /
• 2001

In this paper, we have designed and implemented a new hard embedded real-time system to satisfy hard real-time constraints in moving independently. Real-time kernel should be small size, fast and predictable. Because of the great variety of demands on real time scheduling, a real time kernel should also include a flexible and re-programmable task scheduling discipline. In this paper, we present that real-time applications should be split into small and simple parts with hard real-time constraints. To satisfy these properties, we designed real-time kernel and general kernel, that have their different properties. In real-time tasks, interrupt processing should be run. In general kernel, non real time tasks or general tasks are run. The efficiency of the proposed hard embedded real-time system is shown by comparison results for performance of the proposal real time kernel with both RT-Linux and QNX.