• 대한전기학회논문지:시스템및제어부문D
• /
• 제55권4호
• /
• pp.161-164
• /
• 2006

In this thesis we designed the vision system to inspect the defect of a back light unit of plat panel display device. The vision system is divided into hardware and inspection algorithm of defect. Hardware components consist of illumination part, robot-arm controller part and image-acquisition part. Illumination part is made of acrylic panel for light diffusion and five 36W FPL's(Fluorescent Parallel Lamp) and electronic ballast with low frequency harmonics. The CCD(Charge-Coupled Device) camera of image-acquisition part is able to acquire the bright image by the light coming from lamp. The image-acquisition part is composed of CCD camera and frame grabber. The robot-arm controller part has a role to let the CCD camera move to the desired position. To take inspections of surface images of a flat panel display it can be controlled and located every nook and comer. Images obtained by robot-arm and image-acquisition board are saved on the hard-disk through windows programming and are tested whether there are defects by using the image processing algorithms.

• 한국멀티미디어학회논문지
• /
• 제7권8호
• /
• pp.1058-1065
• /
• 2004

단순 모니터에서 CPU, 메모리, 그리고 하드디스크를 갖춘 셋탑박스에 이르기까지 내장형 시스템은 다양한 응용에 사용되고 있다. 특히 휴대용 또는 소형기기에 멀티미디어를 서비스하는 경우가 증가하고 있고 이들 시스템에는 내장형 운영체제가 탑재되고 있다. 본 논문에서는 멀티미디어 서비스를 위한 내장형 리눅스가 탑재된 임베디드 시스템에서 응용 프로그램과 운영체제 커널사이의 메모리 복사 요구를 감소시키는 Null copy기법을 제안한다. 저성능의 컴퓨팅 파워 및 저용량의 메모리를 가진 내장형 시스템에서 연속 미디어를 네트워크를 통해 실시간으로 전송하고자 할 때 Null copy 기법은 시스템의 QoS를 만족시킬 수 있다. 웹 카메라를 내장형 리눅스 개발 보드에 장착하여 영상 전송 환경을 구축한 결과 Null copy 기법은 CPU 이용률 및 마감시간 실패측면에서 기존 커널에 비해 우수한 성능을 나타내었다.

• 대한기계학회논문집B
• /
• 제27권11호
• /
• pp.1637-1644
• /
• 2003

Stereoscopic particle image velocimetry is a measurement technique to acquire three dimensional velocity field by two cameras. With a laser sheet illumination, the third velocity component can be deduced from out-of$.$plane velocity components using a stereoscopic matching method. Most industrial fluid flows are three dimensional turbulent flows, so it is necessary to use the stereoscopic PIV measurement method. However the existing stereoscopic PIV system seems hard to use since it is very expensive and complex. In this study we have developed a Miniature Stereo-PIV(MSPIV) system based on the concept of the Miniature PIV system which we have already developed. In this paper, we address the design and some primitive experimental results of the Miniature Stereo-PIV system. The Miniature Stereo-PIV system features relatively modest performances, but is considerably smaller, cheaper and easy to handle. The proposed Miniature Stereo-PIV system uses two one-chip-only CMOS cameras with digital output. Only two other chips are needed, one for a buffer memory and one for an interfacing logic that controls the system. Images are transferred to a personal computer (PC) via its standard parallel port. No extra hardware is required (in particular, no frame grabber board is needed).

• 한국콘텐츠학회논문지
• /
• 제9권2호
• /
• pp.453-461
• /
• 2009

본 논문에서는 Html, CSS, JavaScript, Dhtml 등의 웹 언어를 자기주도적으로 학습할 수 있는 웹-기반 코스웨어를 설계하고 구현하였다. 각 단원별로 이론 학습 및 동영상 학습, 실습, 형성평가, 과제실과 자유 게시판으로 이루어져 있으며, 교수자가 그러한 학습내용을 토대로 평가가 가능하도록 하여 웹상에서 교육, 평가, 성적을 처리할 수 있도록 구현하였다. 특히, 한 화면에서 동영상을 보면서 화면의 이동 없이 따라하며 실습하고 결과보기를 할 수 있어, 웹 언어 학습 내용을 학습자 스스로 충분히 숙지하고 실습할 수 있는 웹-기반 학습 환경을 제공한다. 이를 통하여 학습자는 텍스트로 즉각적으로 이해하기 어려운 웹 언어를 효율적으로 실습해 볼 수 있어 학습 이해도를 높일 수 있고 학습자가 주도적으로 학습에 참여하여 흥미를 높일 수 있게 하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2002년도 학술대회지
• /
• pp.517-520
• /
• 2002

Stereoscopic particle image velocimetry is a measurement technique to acquire of three dimensional velocity field by two cameras. With a laser sheet illumination, the third velocity component can be deduced by out-of-plane velocity components using a stereoscopic matching method. Industrial fluid flows are almost three dimensional turbulent flows, so it is necessary to use the stereoscopic PIV measurement method. However the existing stereoscopic PIV system seems hard to use since it is very expensive and complex. In this study we have developed a Stereoscopic Miniature PIV(MPIV) system based on the concept of the Miniature PIV system which we have already developed. In this paper, we address the design and some first experimental results of the stereoscopic PIV system. The Stereoscopic MPIV system features relatively modest performances, but is considerably smaller, cheaper and easy to handle. The proposed Stereoscopic MPIV system uses two one-chip-only CMOS cameras with digital output. Only two other chips are needed, one for a buffer memory and one for an interfacing logic that controls the system. Images are transferred to a personal computer (PC) via its standard parallel port. No extra hardware is required (in particular, no frame grabber board is needed).

• 한국인터넷방송통신학회논문지
• /
• 제11권6호
• /
• pp.261-266
• /
• 2011

인터넷에서의 개인정보 보호의 중요성이 갈수록 증가하고 있다. 개인정보의 노출은 대고객 서비스의 접점인 홈페이지 상의 게시판 및 첨부파일을 통해 주로 노출되고 있으며, 운영 중인 게시판과 게시물 첨부파일의 숫자가 워낙 방대하여 관리자의 수작업으로는 기 존재하거나 최신 입력되는 개인정보를 진단하고 차단하는 데는 한계가 있다. 따라서 홈페이지를 운영하는 기관에서는 효율적인 개인정보보호를 위하여 자동화된 개인정보 스캐닝 및 필터링 솔루션이 필요하다. 본 연구에서는 인터넷과 웹 등에서 개인정보의 노출을 효과적으로 차단 및 치환하기 위한 개인정보 보호 시스템을 개발한다.

• 한국철도학회논문집
• /
• 제3권3호
• /
• pp.147-153
• /
• 2000

The train control and monitoring system (TCMS) is an on board computer system in railway vehicles performing the control, supervisory and diagnostic functions of the complete train system. This system replaces a lot of hard-wired relays and minimizes the necessary vehicle wiring thus increasing the reliability of the train. It is also one of more important equipment on vehicle to implement much higher safety and reliability train system. We studied a software design technique of TCMS using a CASE tool that is a kind of safety critical software engineering tool (SCADE). This tool has mainly four functions such as the graphical editor, the document maker, tile automatically code generator, and the test simulator. The several functions of TCMS are implemented in this software easily programmed using a functional block diagram and a graphic programming language. We applied to automatically generated TCMS modules on the SCADE each functional block for the Standard type EMU in Korea. We performed the combination test using TCMS simulator and the running test in Seoul subway 7 Line. We proved that this technique is more useful for the software design of TCMS in urban transit

• 센서학회지
• /
• 제17권1호
• /
• pp.15-22
• /
• 2008

When designing image sensors including a CMOS vision chip for edge detection, resolution is a significant factor to evaluate the performance. It is hard to improve the resolution of a bio-inspired CMOS vision using a resistive network because the vision chip contains many circuits such as a resistive network and several signal processing circuits as well as photocircuits of general image sensors such as CMOS image sensor (CIS). Low resolution restricts the use of the application systems. In this paper, we improve the resolution through layout and circuit optimization. Furthermore, we have designed a printed circuit board using FPGA which controls the vision chip. The vision chip for edge detection has been designed and fabricated by using $0.35{\mu}m$ double-poly four-metal CMOS technology, and its output characteristics have been investigated.

• 대한의용생체공학회:의공학회지
• /
• 제35권2호
• /
• pp.26-34
• /
• 2014

Little information is available about the characteristics in revolution gait of hemiplegic elderly, which is frequently represented in daily life. It is also hard to elucidate purely the characteristics due to hemiplegia because of no consideration of aging factors. The aim of study is to identify the alteration characteristics of lower extremity joint angles in both straight and revolution gaits together due to hemiplegia through comparing healthy with hemiplegic elderly. Following Institutional Review Board approval, twelve healthy and hemiplegic elderly were participated and the center of body mass (COM) and lower extremity joint angles were measured during straight and revolution gaits using a computer-aided video motion capture system. The results showed that the gait characteristics were generally altered in both straight and revolution gaits due to hemiplegia (p < 0.05). The gait characteristics were then different between the straight and revolution gaits each other. This study may be valuable by identifying for the first time the alterations of the lower extremity joint angles in both straight and revolution gaits due to pure hemiplegia through comparing healthy elderly with hemiplegic elderly.

• 산업공학
• /
• 제10권3호
• /
• pp.75-93
• /
• 1997

Unlike individual applications, it is extremely hard to obtain user requirements for group systems, since there exists very complicated dynamics in group. This may result in spreading a great amount of products with a broad range of contents. Thus, this study presents a comparative analysis of groupware products. As a result, these products have been categorized into three areas which include cooperation/document management systems, collaborative writing systems, and decision-making/meeting systems. While the systems reviewed here focus on the cooperation/document management systems, the other two areas will be dealt in details in part Ⅱ. The first area ends up with two large categories such as proprietary groupware products and intranet groupware products. However, it has been observed that there is a natural convergence between these two categories. Consequently, the comparative analysis has been performed in terms of functions provided on the two categories and a combined category. Each group of the functions has been divided into three parts which consist of basic functions, quasi-basic functions, and others. Such a decision has been made based on the frequency rate of the functions provided in the products. With a more strict rule, the basic functions comprise electronic mail, sanction, bulletin board, document management, scheduling, security, Web browser, and Internet connectivity. This study also provides a framework for integrated functional model of groupware systems. The basic functions are merged into the model. However, the model is so flexible that it can partially include the quasi-functions in addition to the basic functions. In the future, it is expected that a large number of products will stem from the modification of the functional model.