• Journal of Institute of Control, Robotics and Systems
• /
• v.13 no.8
• /
• pp.777-782
• /
• 2007

Human Robot Interaction(HRI) through a haptic interface plays an important role in controlling robot systems remotely. The augmented usage of bio-signals in the haptic interface is an emerging research area. To consider operator's state in HRI, we used bio-signals such as ECG and blood pressure in our proposed force reflection interface. The variation of operator's state is checked from the information processing of bio-signals. The statistical standard variation in the R-R intervals and blood pressure were used to adaptively adjust force reflection which is generated from environmental condition. To change the pattern of force reflection according to the state of the human operator is our main idea. A set of experiments show the promising results on our concepts of human adaptive interface.

• The Journal of Korea Robotics Society
• /
• v.8 no.3
• /
• pp.186-196
• /
• 2013

Since its introduction (e.g., [4, 6]), virtual coupling technique has been de facto way to connect a haptic device with a virtual proxy for haptic rendering and control. However, because of the single dependence on spring-damper feedback action, this virtual coupling suffers from the degraded transparency particularly during contact tasks when large device/proxy-forces are involved. In this paper, we propose a novel virtual coupling technique, which, by utilizing passive decomposition, reduces device-proxy position deviation even during the contact tasks while also scaling down (or up) the apparent inertia of the coordinated device-proxy. By doing so, we can significantly improve transparency between multiple degree of freedom (possibly nonlinear) haptic device and virtual proxy. In other to use passive decomposition, disturbance observer of [3] is adopted to estimate human force with some dead-zone modification to avoid "winding-up" force estimation in the presence of device torque saturation. Some preliminary experimental results are also given to illustrate efficacy of the proposed technique.

• Journal of IKEEE
• /
• v.17 no.1
• /
• pp.44-50
• /
• 2013

This paper proposed the implementation of haptic-based robot which is following a human by using fundamental sensors on robot arms without additional sensors. Joints in the robot arms have several motors, and their angles can be read out by these motors when a human pushes or pulls the robot arms. So these arms can be used as haptic sensors. The implemented robot follows a human by interacting with robot arms and human hands, as a human follows a human by hands.

• The Journal of Korean Institute for Practical Engineering Education
• /
• v.5 no.1
• /
• pp.40-44
• /
• 2013

This paper suggests a multimodal interface control module which allows a student to naturally interact with educational contents in virtual environment. The suggested module recognizes a user's motion when he/she interacts with virtual environment and then conveys the user's motion to the virtual environment via wireless communication. Futhermore, a haptic actuator is incorporated into the proposed module in order to create haptic information. Due to the proposed module, a user can haptically sense the virtual object as if the virtual object is exists in real world.

• Journal of Korea Game Society
• /
• v.15 no.1
• /
• pp.27-34
• /
• 2015

This paper proposes a user interface for enhancing immersiveness and usability by combining hologram and haptic device with common Leap Motion. While Leap Motion delivers physical motion of user hand to control virtual environment, it is limited to handle virtual hands on screen and interact with virtual environment in one way. In our system, hologram is coupled with Leap Motion to improve user immersiveness by arranging real and virtual hands in the same place. Moreover, we provide a interaction prototype of sense by designing a haptic device to convey touch sense in virtual environment to user's hand.

• 한국HCI학회:학술대회논문집
• /
• 2008.02b
• /
• pp.323-328
• /
• 2008

Inflatable Mouse is a volume-adjustable user interface. It can be inflated up to the volume of a familiar mouse, but be deflated and stored flat in a PC card slot of a laptop computer when not in use. Inflatable Mouse functions just like a typical mouse; moreover, it provides new interaction techniques by sensing the air pressure in the balloon of the mouse. It also addresses some issues associated with pressure-sensing interactions such as the lack of bi-directional control and the lack of effective feedback. Moreover, it can be used as both a control tool and a display tool. In this paper, the design of an Inflatable Mouse prototype is described and potential application scenarios such as zooming in/out and fast scrolling using pressure control are explained. We also discuss the potential use of Inflatable Mouse as an emotional communication tool.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.957-962
• /
• 2005

Today, the elderly is increasing gradually in the Republic of Korea society and this problem will be more serious in the near future. Therefore, engineering support for aged people is required. We are establishing a new field of healthcare engineering for elderly people and aiming to support for aged people and disabled people using adaptive control and instrument technology. In this paper, the goal is to implement the shared control of a robot mobility aid for the elderly. As using this type of assistive technology to be useful by its intended user community, it supports elderly people and handicapped people to live independently in their private homes. The interface transforms the force applied by the user into the robot's motion. Devices like buttons, joysticks, and levers already exist for relaying user input; however, they require hand displacement that would loosen or otherwise release the user's hold. Such interfaces make operation very difficult and potentially unsafe. Therefore, we propose a shared control system. It's safe more than joysticks and buttons. The shared control is a means of registering the user's intention through physical interaction. It's an important component in the development of robotic elderly assistant. The concept of shared control describes a system which is two or more independent control systems. We are using that the three component blocks consist of pressure sensor (flexible force sensor), circuit of measurement and transfer function. Experimental trials of this paper have been tested at the indoor environment. The robot is able to know the user intended direction through haptic device were logged along with the robot's force sensor.

• Advances in robotics research
• /
• v.1 no.2
• /
• pp.155-169
• /
• 2014

Study results in the last decades show that amount and quality of physical exercises, then the active participation, and now the cognitive involvement of patient in rehabilitation training are known of crux to enhance recovery outcome of motor dysfunction patients after stroke. Rehabilitation robots mainly have been developing along this direction to satisfy requirements of recovery therapy, or focusing on one or more of the above three points. Therefore, neuro-machine interaction based active rehabilitation robot has been proposed for assisting paralyzed limb performing designed tasks, which utilizes motor related EEG, UCSDI (Ultrasound Current Source Density Imaging), EMG for rehabilitation robot control and feeds back the multi-sensory interaction information such as visual, auditory, force, haptic sensation to the patient simultaneously. This neuro-controlled and perceptual rehabilitation robot will bring great benefits to post-stroke patients. In order to develop such kind of robot, some key technologies such as noninvasive precise detection of neural signal and realistic sensation feedback need to be solved. There are still some grand challenges in solving the fundamental questions to develop and optimize such kind of neuro-machine interaction based active rehabilitation robot.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.2676-2681
• /
• 2003

The Haptic Exploration Laboratory at The Johns Hopkins University is currently exploring many problems related to haptics (force and tactile information) in human-machine systems. We divide our work into two main areas: virtual environments and robot-assisted manipulation systems. Our interest in virtual environments focuses on reality-based modeling, in which measurements of the static and dynamic properties of actual objects are taken in order to produce realistic virtual environments. Thus, we must develop methods for acquiring data from real objects and populating pre-defined models. We also seek to create systems that can provide active manipulation assistance to the operator through haptic, visual, and audio cues. These systems may be teleoperated systems, which allow human users to operate in environments that would normally be inaccessible due to hazards, distance, or scale. Alternatively, cooperative manipulation systems allow a user and a robot to share a tool, allowing the user to guide or override the robot directly if necessary. Haptics in human-machine systems can have many applications, such as undersea and space operations, training for pilots and surgeons, and manufacturing. We focus much of our work on medical applications.

• Journal of Sensor Science and Technology
• /
• v.31 no.5
• /
• pp.324-329
• /
• 2022

This paper proposes a shift-register-based multichannel ultrasonic focusing delay control method using a complex programmable logic device (CPLD) for a high resolution of ultrasonic focusing system. The proposed method can achieve the ultrasonic focusing through the delay control of driving signals of each ultrasonic transducer of an ultrasonic array. The delay of the driving signals of all ultrasonic channels can be controlled by setting the shift register in the CPLD. The experiment verified that the frequency of the clock used for the delay control increased, the error of the focusing point decreased, and the diameter of the focusing point decreased as the length of the shift register in the proposed method. The proposed method used only one CPLD for ultrasonic focusing and did not require to use complex hardware circuits. Therefore, the resources required for the design of an ultrasonic focusing system could be reduced. The proposed method can be applied to the fields of human computer interaction (HCI), virtual reality (VR) and augmented reality (AR).