• 수산경영론집
• /
• 제29권2호
• /
• pp.143-161
• /
• 1998

The objective of this study is to analyze the effects of increase in the oyster hatchery on fishermen's income. The results of the analysis are as follows : \circled1 The necessary quantities of oyster seed are 18,000 thousand hanging line. The 29.4%, of that has been applied by ana-seed collection and 29.1% of that has been applied by proseed collection. The demage of oyster aquaculture business is estimated about 35 billion won or 83 billion won. \circled2 The production cost per hanging line of the oyster hatchery is 1,974 won. And if it is sold by 2,500 won, return on investment will be 31.9%. Therefore profitability of the oyster hatchery is very good. \circled3 There are four important determinant variables of profitability to the oyster hatchery. In the order of their effects, it is operation number, seed price, production cost, and quantity of production. \circled4 If differences of price between the artificial hardening oyster seed and the natural hardening oyster seed are more less 1,430 won, the former is better. \circled5 The necessarily quantities of the oyster hatchery are estimated 160 units in the scale of 10,000 hanging line production to one operation. \circled6 The effect of increasing income of fishermen are estimated about 85.3 billion won or 124.5 billion won from increase in the oyster hatchery.

• Environmental Engineering Research
• /
• 제23권2호
• /
• pp.195-204
• /
• 2018

A pilot scale study was conducted on a down-flow hanging sponge (DHS) reactor installed at a sewage treatment plant in Banda Aceh, Indonesia for treatment of desludging septic tank wastewater. Raw wastewater with an average biochemical oxygen demand (BOD) and total suspended solids of 139 mg/L and 191 mg/L, respectively, was pumped into the reactor. Two different hydraulic retention times (HRTs, 3 h and 4 h) were investigated, equivalent to organic loadings of 1.11 and $0.78kg\;BOD/m^3/d$, respectively. The average BOD concentration in the final effluent was 46 and 26 mg/L at HRTs of 3 and 4 h, respectively. The concentration of retained sludge along the reactor height was 10.2-18.7 g VSS/L-sponge, and the sludge activities were 0.24-0.32 and 0.04-0.40 mg/g VSS/h for heterotrophs and nitrification, respectively. Values of water hold-up volume, dispersion coefficient, and number of tank in-series found from tracer studies of clean sponge and biomass-loaded sponge confirmed that growth of retained sludge on the sponge module improved hydraulic performance of the reactor. Adoption of the DHS reactor by this Indonesian sewage treatment plant would enhance the role of the current desludging septic tank wastewater treatment system.

• Environmental Engineering Research
• /
• 제25권2호
• /
• pp.243-250
• /
• 2020

A down-flow hanging sponge (DHS) bioreactor was operated for the treatment of domestic wastewater. The Stover-Kincannon model was applied for kinetic evaluation of the reactor performance during the operational period. As a result, the coefficient of determination (R²) for straight lines of effluent concentration from the experimental data and from the predictive data of BOD₅; NH₄⁺-N; and TN were 0.9727; 0.9883; and 0.9934, respectively. The calculation of saturation value constant (Umax - g L^-1 d^-1) and maximum utilization rate constant (KB - g L-1 d-1) were 56.818 and 75.034 for BOD₅; 2.960 and 4.713 for NH₄⁺-N; 2.810 and 8.37 for TN, respectively. The study suggests that Stover-Kincannon model can be used for effective evaluation of kinetic removal of BOD₅; NH₄⁺-N; and TN from domestic wastewater treated in a DHS bioreactor.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.576-576
• /
• 2012

High quality single crystalline strain controlled wurtzite ZnO nanowire arrays have been grown on conductive silicon and ITO substrates by a facile hydrothermal method. The diameter of the nanowires was found to be less than 90 nm approximately for both of the two kinds of substrates. The quality of the ZnO nanowire arrays is dramatically improved by hanging the substrate above from the bottom of the Teflon lined autoclave. The structural investigation indicates the preferential orientation of the nanowire along c-axis. In order to make the convincible comparison, the photoluminescence property of the nanowire arrays grown under different conditions are measured, the sharp near band edge emission from PL, low turn-on voltage ($1.9V/{\mu}m$) from field emission measurement and Fowler-Nordheim plot was investigated from ZnO nanowire arrays grown by proposed substrate hanging method.

• 한국건축시공학회지
• /
• 제11권4호
• /
• pp.407-418
• /
• 2011

Recently energy management measures at the political level, for the purpose of reducing energy consumption in the building sector, are being actively introduced. As a practical method, the exterior insulation method, which is proven to effective in reducing the energy loss through walls, has been favored. In this study, detailed implementations are suggested to activate exterior insulation system which can improve the housing insulation performance. The newly designed Gang-form system with hanging scaffolding was suggested to revamp constructability for finishing outer wall. The research results are based on a multifaceted analysis of the current problems of exterior insulation systems, and on recommendations proposed by exterior insulation experts in the Charrette discussion. The study has indicates that the customized TACT schedule considering the site condition has shortened the construction period to 5 months from 7.5 months. Through utilizing the suggestions of this study, the prevalence of exterior insulation systems is expected to become widespread.

• 대한건축학회논문집:구조계
• /
• 제35권7호
• /
• pp.147-156
• /
• 2019

The purpose of this study is to consider structural issues and analyze construction sequences when constructing hanging floors supported by Mega truss. Since suspended structures were supported by the Mega truss, vertical load on suspended structures was needed to transfer from low to high. Deflection management of structures was the primary point under construction. The results of this study were as follows; The steel structures, which has relatively lighter self-weight, were constructed upwards after the base floor steel truss erection. Concrete Placing, which has relatively heavier self-weight, were performed in two phases to minimize structure's deflection. Slab was placed downwards from the top floor to lower floor whereas column was places upwards. Deflection measurements were carried out at every construction sequences.

• 한국건축시공학회지
• /
• 제16권3호
• /
• pp.271-278
• /
• 2016

국내 철도 및 도로 교량의 대표적 상부구조 형식인 철제 (steel box 또는 H-형강) 거더교와 PSC (Pre-Stressed Concrete) 거더교는 현재 가장 많이 시공되는 교량형식으로 전체 교량의 75%, 시공 금액의 80%를 차지하고 있다. 거더교 상판 콘크리트 타설을 위한 거푸집 공사는 여러 가지 시공의 어려움 때문에 다양한 공법이 개발 및 적용되었다. 그러나 재료 손실 및 인건비 상승으로 인한 원가 상승, 미숙련공에 의한 품질 저하, 복잡한 시공방법으로 인한 공기 증가, 생산성 저하, 고소작업으로 인한 안전사고 발생, 큰 부재로 인한 운송성 저하, 재료 특성으로 인한 유지관리비 증가 등 여러 가지 문제가 부분적으로 해결되지 않았다. 이를 해결하기 위하여 기존 공법을 대체할 수 있는 공법이 필요하다. 따라서 본 연구는 거더교 상판 콘크리트 타설용 시스템 거푸집 (Purlin Hanging System Form)의 개발 연구 및 경제성 분석을 목적으로 한다. 본 연구를 통해 Purlin Hanging System Form이 기존 공법에 비해 60%의 원가절감, 80%의 공기단축 효과가 있음을 확인하였다.

• 기술사
• /
• 제21권2호
• /
• pp.1-12
• /
• 1988

• 수산경영론집
• /
• 제2권1_2호
• /
• pp.7-25
• /
• 1971

• 기술사
• /
• 제25권1호
• /
• pp.105-111
• /
• 1992