• The Journal of Fisheries Business Administration
• /
• v.29 no.2
• /
• pp.143-161
• /
• 1998

The objective of this study is to analyze the effects of increase in the oyster hatchery on fishermen's income. The results of the analysis are as follows : \circled1 The necessary quantities of oyster seed are 18,000 thousand hanging line. The 29.4%, of that has been applied by ana-seed collection and 29.1% of that has been applied by proseed collection. The demage of oyster aquaculture business is estimated about 35 billion won or 83 billion won. \circled2 The production cost per hanging line of the oyster hatchery is 1,974 won. And if it is sold by 2,500 won, return on investment will be 31.9%. Therefore profitability of the oyster hatchery is very good. \circled3 There are four important determinant variables of profitability to the oyster hatchery. In the order of their effects, it is operation number, seed price, production cost, and quantity of production. \circled4 If differences of price between the artificial hardening oyster seed and the natural hardening oyster seed are more less 1,430 won, the former is better. \circled5 The necessarily quantities of the oyster hatchery are estimated 160 units in the scale of 10,000 hanging line production to one operation. \circled6 The effect of increasing income of fishermen are estimated about 85.3 billion won or 124.5 billion won from increase in the oyster hatchery.

• Environmental Engineering Research
• /
• v.23 no.2
• /
• pp.195-204
• /
• 2018

A pilot scale study was conducted on a down-flow hanging sponge (DHS) reactor installed at a sewage treatment plant in Banda Aceh, Indonesia for treatment of desludging septic tank wastewater. Raw wastewater with an average biochemical oxygen demand (BOD) and total suspended solids of 139 mg/L and 191 mg/L, respectively, was pumped into the reactor. Two different hydraulic retention times (HRTs, 3 h and 4 h) were investigated, equivalent to organic loadings of 1.11 and $0.78kg\;BOD/m^3/d$, respectively. The average BOD concentration in the final effluent was 46 and 26 mg/L at HRTs of 3 and 4 h, respectively. The concentration of retained sludge along the reactor height was 10.2-18.7 g VSS/L-sponge, and the sludge activities were 0.24-0.32 and 0.04-0.40 mg/g VSS/h for heterotrophs and nitrification, respectively. Values of water hold-up volume, dispersion coefficient, and number of tank in-series found from tracer studies of clean sponge and biomass-loaded sponge confirmed that growth of retained sludge on the sponge module improved hydraulic performance of the reactor. Adoption of the DHS reactor by this Indonesian sewage treatment plant would enhance the role of the current desludging septic tank wastewater treatment system.

• Environmental Engineering Research
• /
• v.25 no.2
• /
• pp.243-250
• /
• 2020

A down-flow hanging sponge (DHS) bioreactor was operated for the treatment of domestic wastewater. The Stover-Kincannon model was applied for kinetic evaluation of the reactor performance during the operational period. As a result, the coefficient of determination (R²) for straight lines of effluent concentration from the experimental data and from the predictive data of BOD₅; NH₄⁺-N; and TN were 0.9727; 0.9883; and 0.9934, respectively. The calculation of saturation value constant (Umax - g L^-1 d^-1) and maximum utilization rate constant (KB - g L-1 d-1) were 56.818 and 75.034 for BOD₅; 2.960 and 4.713 for NH₄⁺-N; 2.810 and 8.37 for TN, respectively. The study suggests that Stover-Kincannon model can be used for effective evaluation of kinetic removal of BOD₅; NH₄⁺-N; and TN from domestic wastewater treated in a DHS bioreactor.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.576-576
• /
• 2012

High quality single crystalline strain controlled wurtzite ZnO nanowire arrays have been grown on conductive silicon and ITO substrates by a facile hydrothermal method. The diameter of the nanowires was found to be less than 90 nm approximately for both of the two kinds of substrates. The quality of the ZnO nanowire arrays is dramatically improved by hanging the substrate above from the bottom of the Teflon lined autoclave. The structural investigation indicates the preferential orientation of the nanowire along c-axis. In order to make the convincible comparison, the photoluminescence property of the nanowire arrays grown under different conditions are measured, the sharp near band edge emission from PL, low turn-on voltage ($1.9V/{\mu}m$) from field emission measurement and Fowler-Nordheim plot was investigated from ZnO nanowire arrays grown by proposed substrate hanging method.

• Journal of the Korea Institute of Building Construction
• /
• v.11 no.4
• /
• pp.407-418
• /
• 2011

Recently energy management measures at the political level, for the purpose of reducing energy consumption in the building sector, are being actively introduced. As a practical method, the exterior insulation method, which is proven to effective in reducing the energy loss through walls, has been favored. In this study, detailed implementations are suggested to activate exterior insulation system which can improve the housing insulation performance. The newly designed Gang-form system with hanging scaffolding was suggested to revamp constructability for finishing outer wall. The research results are based on a multifaceted analysis of the current problems of exterior insulation systems, and on recommendations proposed by exterior insulation experts in the Charrette discussion. The study has indicates that the customized TACT schedule considering the site condition has shortened the construction period to 5 months from 7.5 months. Through utilizing the suggestions of this study, the prevalence of exterior insulation systems is expected to become widespread.

• Journal of the Architectural Institute of Korea Structure & Construction
• /
• v.35 no.7
• /
• pp.147-156
• /
• 2019

The purpose of this study is to consider structural issues and analyze construction sequences when constructing hanging floors supported by Mega truss. Since suspended structures were supported by the Mega truss, vertical load on suspended structures was needed to transfer from low to high. Deflection management of structures was the primary point under construction. The results of this study were as follows; The steel structures, which has relatively lighter self-weight, were constructed upwards after the base floor steel truss erection. Concrete Placing, which has relatively heavier self-weight, were performed in two phases to minimize structure's deflection. Slab was placed downwards from the top floor to lower floor whereas column was places upwards. Deflection measurements were carried out at every construction sequences.

• Journal of the Korea Institute of Building Construction
• /
• v.16 no.3
• /
• pp.271-278
• /
• 2016

In the case of South Korea, steel girder bridge (steel box or H-steel) and PSC (Pre-Stressed Concrete) girder bridge are the representative upper structures of railroad and road bridges. These structures account for 75% of the total bridge constructions and 80% of the total construction cost. Since the form work for concreting bridge slab is difficult, various construction methods developed and applied. However, several problems in those methods did not solve partially, including cost increase by material loss and rise of labor costs, quality deterioration by unskilled workers, increased construction time by complicated method, reduced productivity, safety accident by high place work, difficult transportation by big member, and rise of maintenance cost by material characteristic. Alternative method is needed to solve problems of as-is methods. Therefore, the purpose of this study is development of the purlin hanging system form for the girder bridge slab and its economic analysis. Through the findings of this study, it was verified that the purlin hanging system form is possible 60% reduction in cost and 80% reduction in time as comparison with conventional method.

• Journal of the Korean Professional Engineers Association
• /
• v.21 no.2
• /
• pp.1-12
• /
• 1988

• The Journal of Fisheries Business Administration
• /
• v.2 no.1_2
• /
• pp.7-25
• /
• 1971

• Journal of the Korean Professional Engineers Association
• /
• v.25 no.1
• /
• pp.105-111
• /
• 1992