• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.12
• /
• pp.1302-1312
• /
• 2008

Relaxed Static Stability(RSS) has been applied to improve flight performance of modern version supersonic jet fighters. Flight control systems are necessary to stabilize an unstable aircraft and to provide adequate handling qualities. Also, flight control systems of modern aircraft employ many safety measure to cope with emergency situations such as a pilot unknown attitude flight conditions of an aircraft in night flight-testing. This situation is dangerous because the aircraft can lose if the pilot not take recognizance of situation. The system called the "Pilot Activated Recovery System" or PARS, provided a pilot initiated automatic maneuver capable of an aircraft recoveries in situations of unusual attitudes, speed and altitude. This paper addresses the concept of PARS with AARS(Automatic Attitude Recovery System), ATCS(Automatic Thrust Control System) and MARES(Minimum Altitude Recovery Estimation System), and this control law is designed by nonlinear control law design process based on model of supersonic jet trainer. And, this control law is verified by real-time pilot evaluation using an HQS(Handling Quality Simulator). The result of evaluation reveals that the these systems support recovery of an aircraft unusual attitude and speed, and improve a safety of an aircraft.

• Journal of the Korean Society of Food Culture
• /
• v.10 no.1
• /
• pp.35-44
• /
• 1995

A hazard analysis which included watching operations, measuring temperatures of foods throughout preparation and display, and sampling and testing for microorganisms of total plate counts and coliform bacteria was conducted in various phases of product flow of Korean soups (Galbitang, Sullungtang, Jangkuk) prepared at Korean restaurants. Cooked foods were sometimes held at room temperature long enough to permit multiplication of bacteria that might have been present. This was confirmed by the finding of large numbers of aerobic mesophilic colonies ($10^6$) in samples of such foods after handling and holding for several hours before served. These bacteria decreased down to $10^1{\sim}10^2$ while the contaminated Tang were served. And internal temperature of Tang served was approximately $70^{\circ}C$. Critical control points identified were, pre-preparation, handling after cooking and holding on display. Guidelines were suggested for effective quality control of Tang (Korean soups) production. Handlers of these foods need to be informed of the hazards and appropriate preventive measures.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.5
• /
• pp.84-89
• /
• 2001

The alignment of the rollers carrying the web is found to be one of important factors to the lateral behavior of the moving web and to the quality of the final web products. But, the perfect alignment of the rollers is not always possible and the web itself can be cambered. Thus the control of lateral behavior of the moving web is critical in the most of web handling systems. The web guiding system that adjusts the angle of the alignment between two adjacent rollers is commonly used in industry. But, in this paper a new web guiding system is proposed by using the lateral dynamics of the moving web induced by a tilted roller in normal direction of a web. The computer simulation study was carried out to verify the steering performance of the suggested guiding system. Computer simulation study shows that the performance of the new guiding mechanism is better than that of an existing guiding mechanism.

• Proceedings of the Safety Management and Science Conference
• /
• 2001.11a
• /
• pp.193-202
• /
• 2001

The individual rotten water purification tank recently discharges wastewater and sewage through the outlet without purification ability. The outlet water and affiliated water purification tank with microorganism cultivator tank cultivates microorganism and then drops the value BOD, COD of sewage and discharges the quality of water into the outlet. The blower and water pump operating continuously prompts the waste of energy and deterioration of equipment. Each room of deposition tank, foaming tank, microorganism cultivator tank is equipment with the sludge detection senses so it can detect the density of each room. The power-drive plant of the blower and water pump which ate the system cultivating the microorganism must be made as fuzzy controlization (If the sludge amount of each room become higher, the rate of operation of blower and water pump must heighten, on the contrary, in case of row sludge amount, the total handling amount and microorganism handling amount of each room of control. Tank reducing the rate of operation must be DB. At present, the blower amount in proportion to the sludge and oxygen demanding amount has to control. Each mom must be checked outlet level of the outlet, also each room must flow backward discharge materials, and must operate feed-back control until we want to be come as a below value of BOD/COD(10PPM ; KS).

• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.12
• /
• pp.1381-1388
• /
• 2015

The smartwork is future-oriented working environment that allows us to engage in work anytime, anywhere conveniently and efficiently by utilizing information and communication technologies in a variety of locations and mobile environments. We proposed a smartwork platform to support the efficient housing management for small housing management companies. Our systems interwork in real time with smart mobile devices and SNS to support high quality housing service for tenants and rental operators. In this paper, we describe real-time complaint handling service using SNS which is a part of smartwork platform for the efficient housing management.

• Journal of the Korea Safety Management & Science
• /
• v.3 no.4
• /
• pp.53-63
• /
• 2001

The individual rotten water purification tank recently discharges wastewater and sewage through the outlet without purification ability. The outlet water and affiliated water purification tank with microorganism cultivator tank cultivates microorganism and then drops the value BOD, COD of sewage and discharges the quality of water into the outlet. The blower and water pump operating continuously prompts the waste of energy and deterioration of equipment. Each room of deposition tank, foaming tank, microorganism cultivator tank is equipment with the sludge detection senses so it can detect the density of each room. The power-drive plant of the blower and water pump which are the system cultivating the microorganism must be made as fuzzy controlization (If the sludge amount of each room become higher, the rate of operation of blower and water pump must heighten, on the contrary, in case of row sludge amount, the total handling amount and microorganism handling amount of each room of control. Tank reducing the rate of operation must be DB. At present, the blower amount in proportion to the sludge and oxyzen demanding amount has to control. Each room mus be checked outlet level of the outlet, also each room must flow backward discharge materials, and must operate feed-back control until we want to be come as a below value of BOD/COD(10PPM ; KS).

• Journal of Internet Computing and Services
• /
• v.23 no.2
• /
• pp.1-7
• /
• 2022

Machine learning (ML) algorithms have been intended to seamlessly collaborate for enabling intelligent networking in terms of massive service differentiation, prediction, and provides high-accuracy recommendation systems. Mobile edge computing (MEC) servers are located close to the edge networks to overcome the responsibility for massive requests from user devices and perform local service offloading. Moreover, there are required lightweight methods for handling real-time Internet of Things (IoT) communication perspectives, especially for ultra-reliable low-latency communication (URLLC) and optimal resource utilization. To overcome the abovementioned issues, this paper proposed an intelligent scheme for traffic steering based on the integration of MEC and lightweight ML, namely support vector machine (SVM) for effectively routing for lightweight and resource constraint networks. The scheme provides dynamic resource handling for the real-time IoT user systems based on the awareness of obvious network statues. The system evaluations were conducted by utillizing computer software simulations, and the proposed approach is remarkably outperformed the conventional schemes in terms of significant QoS metrics, including communication latency, reliability, and communication throughput.

• Steel and Composite Structures
• /
• v.42 no.1
• /
• pp.123-137
• /
• 2022

The fundamental period (FP) is one of the most critical parameters for the seismic design of structures. In the reinforced concrete (RC) infilled frame, the infill walls significantly affect the FP because they change the stiffness and mass of the structure. Although several formulas have been proposed for estimating the FP of the RC infilled frame, they are often associated with high bias and variance. In this study, an efficient soft computing model, namely the group method of data handling (GMDH), is proposed to predict the FP of regular RC infilled frames. For this purpose, 4026 data sets are obtained from the open literature, and the quality of the database is examined and evaluated in detail. Based on the cleaning database, several GMDH models are constructed and the best prediction model, which considers the height of the building, the span length, the opening percentage, and the infill wall stiffness as the input variables for predicting the FP of regular RC infilled frames, is chosen. The performance of the proposed GMDH model is further underscored through comparison of its FP predictions with those of existing design codes and empirical models. The accuracy of the proposed GMDH model is proven to be superior to others. Finally, explicit formulas and a graphical user-friendly interface (GUI) tool are developed to apply the GMDH model for practical use. They can provide a rapid prediction and design for the FP of regular RC infilled frames.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.33 no.s01
• /
• pp.1-17
• /
• 1988

Rice Quality is considered to the five catagories ; the nutritional value: the characteristics of cooking. eating and processing: grain size, shape and appearance : milling yields: and storage characteristics. Because most rice is processed and consumed in whole-kernel form. the cooking and eating quality is of important and the physical properties of the intact kernel such as size, shape and general appearance are of particular significance in determining marketing quality. Eating Quality which can be directly evaluated by consumer's panel test is so complicate and variable, and thus the objective and simplified method of evaluation is required of using appropriate instruments. Even though many researches have been done to evaluate the eating quality in various aspects such as the texture of cooked rice kernels, amylogram analysis of rice powder, amylose content. gelatinization temperature. moisture absorption of rice kernel, and cooking characteristics, none of them is satisfied for the evaluation of eating quality. The improving eating quality should be also considered to many cultural factors. such as varieties, climatic and soil conditions, cultural method, handling after harvest. milling and storage conditions. In Korea, many researches in grain size. shape and appearance, and eating quality have been done with the varietal improvement mainly by rice breeders, but no effective method of evaluation was established. A few research have been done in the relationship between rice quality and cultural factors. In the future, research in rice quality should emphasize to establish the standard evaluation method in the physicochemical properties of rice kernels for application of varietal selection. and to develop cultural practices for the preserving quality characteristics of the varieties.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.5
• /
• pp.57-64
• /
• 2005

Modern versions of supersonic jet fighter aircraft using digital flight-by-wire flight control system receive aircraft flight condition such as altitude, airspeed and AoA(angle of attack) from IMFP(Integrated Multi-Function Probe). IMFP sensors data have triplex structure using three IMFP sensors. An air data reconfiguration mode is applied to a T-50 flight control law to guarantee the aircraft flight stability when 2 or 3 IMFP sensors data are invalided. In this study, linear analysis and HQS(Handling Quality Simulator) pilot simulation are performed to analyze flight stability when the air data reconfiguration mode is applied to the control law. And we propose an example that the air data reconfiguration mode is applied to the control law due to second failure of IMFP during T-50 flight. It is found that the aircraft flight stability is not affected when the T-50 flight control law is changed to the air data reconfiguration mode.