• 한국항만경제학회지
• /
• 제27권1호
• /
• pp.137-154
• /
• 2011

본 연구의 목적은 합리적인 Trigger Rule에 따른 최적의 서비스 수준을 제시할 수 있는 인천항의 시설확보율의 검토를 통해 향후 인천신항의 시기적절한 항만개발을 위한 여건을 조성함과 아울러 향후 우리나라에서 인천항의 위상확보와 역할방향에 대해 정책적 제언을 제시하는 것을 목적으로 하였다. 연구결과에 따르면 국토부 예측치 보다 2001~2009년 까지의 연평균 증가율을 이용하여 트리거룰을 적용한 경우 2년 앞당겨 2021년까지 18개 선석 조기완공이 가능할 것으로 나타났으며 이를 위해 인천신항을 포함한 3포트 정책, 고부가가치 환적화물 유치, 인천신항 조기 완공 여건 조성 등을 제언하였다.

• 품질경영학회지
• /
• 제40권4호
• /
• pp.543-558
• /
• 2012

Purpose: The purpose of this study was to propose useful suggestions by analyzing causal effect relationship between port service quality, and customer satisfaction and performance in port industry. Methods: The collected data through the survey were analyzed using multi-regression analysis. The measurement tools used for this study were divided into three dimensions such as internal quality, interaction quality and environmental quality. Results: The results of this study are as follows; regarding the influence of pot service quality dimension on customer satisfaction, it was found that the effects of interaction quality and internal quality were significant and those of environmental quality was not significant on customer satisfaction. It was found that customer satisfaction made statistically significant influence on performance from the investigation of the causal effect relationship between customer satisfaction and performance. Conclusion: Incheon Port needs to act actively paying attention to port facilities, efficient operation, network, cargo recruitment activities, smooth communication and fast handling.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2010년도 춘계학술대회
• /
• pp.276-277
• /
• 2010

본 논문은 RTGC 시스템의 에너지 절감을 위한 에너지 저장 시스템에 대해 다룬다. 에너지 저장 시스템으로는 배터리, 슈퍼캐패시터 그리고 플라이휠의 장정과 단점이 조사되었다. 이들 에너지 저장 시스템들 중 플라이휠 에너지 저장시스템은 현재 해결되어야 할 기술 및 가격적인 측면에도 불구하고 향후 기술의 발전을 전제를 뒀을 때 매우 촉망받는 에너지 저장시스템임이 조사되었다. 또한, 컨테이너 이송에 사용되는 RTGC에서 베터리와 플라이휠 에너지 저장 시스템이 각각 사용된 경우에 대해 에너지 절감에 대한 결과가 정량적으로 조사되었다.

• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회/대한산업공학회 2005년도 춘계공동학술대회 발표논문
• /
• pp.592-598
• /
• 2005

The port, differently from general working places, is a closed area required for security, customs, and quarantine procedures. The loading and unloading is being done differently by ports, cargoes, and ships. To do loading and unloading, a lot of equipment and different types of labor are required, which flow is complicated and safe management is essential. As above mentioned the port is very unique and very deteriorated working place in its working environment. The purpose of this study is to propose ways to reduce and prevent from port accidents. As first step to do this, we have collected 923 accidents happened at Incheon Port during the period of 1994 to 2003. We have thoroughly analyzed characteristics, harmfulness, and risk of the loading/unloading they have done, as well as the accident frequency and relationship between the accidents. As second step to further analyze, We have employed DMAIC technology, an advanced process of 6 sigma presently in spotlight as the best program for management innovation. This analysis results in recognition of important accident characteristics, causes and effects analysis, critical causes of accident, and suggestions to decrease accidents.

• 한국항해항만학회지
• /
• 제29권3호
• /
• pp.291-298
• /
• 2005

본 기술논문에서 18,000 TEU급 초대형 선박에 대응하는 차세대 컨테이너크레인의 규격 및 성능을 검토하였다. 컨테이너선의 발달 과정을 연대순으로 살핀 후에 기존에 설치되어 운영중인 컨테이너크레인의 특성을 파악하였고 세계각처에서 수행되고 있는 컨테이너크레인에 관한 연구동향을 분석하였다. 분석한 결과를 토대로 2014년 이후에 등장할 차세대 컨테이너크레인의 규모 및 성능을 예측하였다. 검토된 사항은 컨테이너크레인의 구조, 트롤리와 호이스트의 메커니즘, 제어방식, 아웃리치, 백리치, 레일게이지, 하역능력, 안정성 및 내구성 등이다.

• 한국항해학회지
• /
• 제24권5호
• /
• pp.373-383
• /
• 2000

The ship’s safe mooring stability is a principles for the safe cargo handling works at the mooring berth. Today numerous standards, guidelines and recommendations concerning mooring practices, fittings and equipments exist throughout the worldwide maritime industries. In recently, the mooring facilities were constructed as dolphin types at the open sea area apart far from shoreside instead of enclosed coastline area in accordance with increasing ship’s size and for preventing environmental pollution. Therefore the exciting wave condition must be considered as a basic environmental criteria with the wind force and current force for all of the mooring ships at the sea berth facilities. In this study, this added wave force as one of the environmental external forces by using the theoretical formula was applied to the LNG ship in Pyeongtaeg harbor needed the special mooring stability of the sea berth. Through this research, it can be confirmed that wave force is the very important factor in the mooring force and the strength of wave force works much more in the full laden condition than in the lightship condition. And also the wave force changes to non-linear states according to the wave frequency and wave length. In addition, the maximum limit criteria of environmental force of prohibiting the entering ship on the berth and loading works controlled by the port authority concerned of Pyeongtaeg port fully satisfies the condition of the mooring limit force recommended by OCIMF that the safe permitted force of the mooring line have to be within 55 % of MBL.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2014년도 춘계학술대회
• /
• pp.46-48
• /
• 2014

인천항은 지리 위치적인 특성으로 인하여 조류가 강하고, 가항수역이 협소할 뿐만 아니라 굴곡이 심하여 지금까지 인천항 입출항 최대크기의 선박은 7만 DWT급의 만재상태의 파나막스 정도만 가능했으나, 앞으로는 반재(Half loading)한 상태의 VLCC가 입출항할 것으로 판단된다. 따라서 인천항 입항항로인 동수도 항로 주변여건을 다각도로 검토하고, VLCC의 조종특성을 감안한 입출항 안정성을 선박조종 시뮬레이션을 통하여 평가하였다.

• 한국정밀공학회지
• /
• 제23권12호
• /
• pp.103-110
• /
• 2006

The rail clamp is very important device to prevent that a container crane slips along a rail due to the wind blast as well as to locate the crane in the set position during an operating mode. Recently, the design wind speed criteria were intensified from the wind speed of 16m/s to 35m/s during an operating mode, and from 50m/s to 75m/s during a stowed mode in Korea, according to the 'Inspection Criteria for Facilities and Equipments in Port' reformed after typhoon 'Maemi'. In order to design the wedge type rail clamp for the reinforced design wind speed criteria of 35m/s, we carried out the finite element analysis of the rail clamp with respect to the wedge angle, and analyzed the relationship between the wedge angle and the sliding distance of the rail clamp.

• 해양환경안전학회지
• /
• 제7권1호
• /
• pp.15-23
• /
• 2001

In regulation of IGC code 12.1 mechanical ventilation should be arranged to ensure sufficient air movement through the space to avoid the accumulation of flammable or toxic vapours and ensure a safe working environment, but in no case should the ventilation system have a capacity of less than 30 changes of air per hour baed upon the total volume of the space. In this study, a scaled mode chamber was constructed to investigate the ventilation characteristics and stagnation area in the hood room of LNG carrier and pump room in tanker. An experimental study was performed on the model by using visualization equipment with a laser apparatus and an image intensifier CCD camera. Twelve different kinds of measuring areas were selected as the experimental condition. Instant simultaneous velocity vectors in the whole fields were measured by a 2-D PIV system A three-dimensional numerical simulation was also carried out for three different Reynolds numbers. Then the CFD predictions were discussed with the experimental results. The results show the spiral L-shape flow that moves from the opening on the left wall diagonally to the upper right part dominates the ventilation structure. The stationary area of hood room in the velcoity distributions was located in the upper left stern part.

• 통상정보연구
• /
• 제8권4호
• /
• pp.147-156
• /
• 2006

In all cargo cases one of the first things the person handling the claim must do is decide who is potentially liable as a carrier of the goods. This issue arises because bills of lading often do not identify the carrier. The "carrier" could be the shipowner or the charterer or both. The issue of the identity of the "carrier" is a question of fact. The question to ask in each case is who undertook or agreed to carry and deliver the goods. The answer to this question will largely depend on the facts. The shipowner is almost always liable as a carrier under Common law provided there is no demise charter of the ship. The more recent case law, however, suggests that in the usual situation both the charterer and shipowner will be liable. Accordingly, both the owner and charterer should be put on notice of any claim and, in the event an extension of suit time is required, the extension should be obtained from both. An alternative method by which the charterer can avoid liability is to insert and 'Identity of Carrier' clause in the bill of lading.