• 정보처리학회논문지A
• /
• 제9A권2호
• /
• pp.217-224
• /
• 2002

3D 공간정보를 이용하여 3D 이미지를 처리하는 시스템이 많이 상용화되어 있다. 기존에 3D 이미지를 처리하기 위한 방법으로 고성능의 시스템을 이용하거나 이미지 압축 기술을 사용하였다. 하지만 고성능의 시스템을 사용하여 GIS 시스템을 구현할 경우 가격의 부담이 크다는 문제점이 있고 이미지 압축 기술을 사용하여 GIS 시스템을 구현할 경우 원 이미지에 손실이 크다는 문제점이 있다. 또한 일반 시스템에서 3D 이미지를 처리하려면 3D 이미지의 파일의 크기가 크기 때문에 공간 이미지를 처리하는데 시간이 오래 걸린다는 단점이 있다. 따라서 본 논문에서는 3D 이미지를 병렬로 처리하여 디스플레이 시간을 단축하는 병렬 알고리즘을 제안한다. 본 논문에서 제시된 병렬 알고리즘은 3D 이미지를 다수의 노드로 분할하여 각 노드에서 이미지를 화면에 디스플레이 하는 방법을 사용한다. 병렬컴퓨터의 노드의 수가 증가함에 따라 제안된 알고리즘의 성능이 증가함을 실험을 통해 보였다.

• PNF and Movement
• /
• 제17권3호
• /
• pp.379-389
• /
• 2019

Purpose: This study examined the effects of wheelchair handle directions on the trunk muscle activity of adult males when climbing ramps. It also evaluated the wheelchair attendant's physical discomfort during tasks. Methods: Healthy males aged over 20 years were chosen and the direction of wheelchair handle grip was randomly selected. The grips included a general grip with ulnar deviation, a medial grip with wrist pronation, and a neutral grip with a neutral wrist. The trunk muscle activity was measured using surface electromyography. Furthermore, the physical discomfort of wheelchair attendants was subjectively evaluated using the Borg CR-10 Scale, which rates the perceived exertion. In addition, the SPSS 18.0 program was used perform repeated measure ANOVA to compare muscle activity and subjective discomfort during the interventions. The contrast test was also conducted with a significance level (α) of 0.05. Results: There was significant difference between the general grip and the medial grip in the rhomboid major muscle and the lumbar erector spinae muscle (p<0.05). In addition, there was significant difference between the general grip and the neutral grip in the rhomboid major muscle and the lumbar erector spinae muscle (p<0.05). Further, there was significant difference between the general grip and the neutral grip in subjective discomfort (p<0.05). Conclusion: In this study, adult male trunk muscle activity and subjective discomfort were lowest when using the neutral grip while climbing ramps. Accordingly, we suggest that neutral grips will help improve the function of the musculoskeletal system and reduce the subjective discomfort by putting less strain on the trunk muscles and maximizing efficiency with less force.

• 보존과학회지
• /
• 제25권1호
• /
• pp.1-16
• /
• 2009

전라북도는 해안을 접하고 있으며 넓은 평야지대를 중심으로 마한 백제 문화가 형성되어 있었고 동남쪽으로는 철기 문화가 융성했었던 가야국이 접해 다양한 소환두도가 출토되는 지역이다. 대상 유물인 소환두도는 환두도 중 그 출토 수량이 가장 많고, 오랜 기간 제작된 유물로서 장식환두도 제작의 기초가 되었을 것으로 추측하고 있다. 그러나 고리에 문양이 없는 소환두도는 출토 수량이나 고고학적 자료의 가치가 충분함에도 불구하고 제작방법이 단순하다는 이유로 연구에 대한 관심이 적었다. 따라서 본 연구에서는 제작 시기나 출토 위치에 따라 차이를 보이는 여러 형태의 소환두도 병부 부분의 제작 기법을 정확히 밝히기 위한 목적으로 전라북도에서 출토된 마한 백제 가야시대(6C 이전) 소환두도의 병부를 X-선 촬영을 통하여 시대에 따라 변화되는 제작기법을 연구하였다. 그 결과 6C 이전의 마한 백제 가야시대 유적을 중심으로 출토된 환두도의 X-선 촬영을 이용하여 확인한 제작기법은 시기에 따라 일체형, 환두단접형, 이체형 순으로 제작공정이 발전하는 것으로 나타났다. 특히, 이체형에서는 환두를 별도로 제작하여 병부와 단접하고 도신을 '리벳팅'(못접) 또는 병목 등으로 연결하였다. 연결방법도 발전된 단접기술이 있음에도 불구하고 활용하지 못한 이유는 상감이나 도금 등에 손상이 될 수 있어 '리벳팅'(못접)이나 병목으로 연결한 방법을 사용한 것으로 판단된다. 또한 이체형(二體型) 이 나타나는 시기에는 손잡이장식, 칼머리장식, 상감기법, 은판도금의 금속공예 기법이 등장하게 된다. 시대에 따라 변화되는 제작기법을 정확히 밝힘으로서 환두도 연구에 대한 기초적 학술 자료를 제공하였다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2004년도 학술대회지
• /
• pp.482-485
• /
• 2004

We fabricated a hybrid bulk/fully depleted silicon on insulator (FDSOI) complementary metal oxide semiconductor (CMOS) active pixel image sensor. The active pixel is comprised of reset and source follower transistors on the SOI seed wafer, while the pinned photodiode and readout gate and floating diffusion are fabricated on the SOI handle wafer after the removal of the buried oxide. The source of dark current is eliminated by hybrid bulk/FDSOI pixel structure between localized oxidation of silicon (LOCOS) and photodiode(PD). By using the low noise hybrid pixel structure, dark currents qm be suppressed significantly. The pinned photodiode can also be optimized for quantum efficiency and reduce the noise of dark current. The spectral response of the pinned photodiode on the SOI handle wafer is very flat between 400 nm and 700 nm and the dark current that is higher than desired is about 10 nA/cm2 at a $V_{DD}$ of 2 V.

• 한국가구학회지
• /
• 제26권1호
• /
• pp.12-21
• /
• 2015

This is a study and work of furniture design adopted from a natural phenomenon, especially from the changing shapes of the moon. The drawer of furniture, a part frequently contacted with our hand (human body) is well related to the symbolism of the moon, which includes life conception and fertility. I created various forms of drawer handle shaped from the moon phases, which give a furniture design esthetical, symbolic and formative meanings. The characteristics of my drawer furniture designs are classified into 3 types. First, as the volumes of drawers increase, the handle shapes also change differently: old moon, crescent, half moon and full moon. Second, without keeping time order, drawers may have the same sizes with handles freely selected and arranged by formative accounts. Third, both increasingly changing type and freely selected and arranged type are combined to make a composite structure. In their simple geometric forms, these furnitures can provide nature intimacy, which fulfill the needs of our time.

• 한국잠사곤충학회지
• /
• 제29권2호
• /
• pp.67-72
• /
• 1987

견직물의 효소정련에 있어서 조련정도가 효소정련한 견직물의 특성에 미치는 영향을 구명하기 위하여 조련정도가 다른 효소정련견포에 대하여 KES-F System을 적용하여 역학적 특성 즉 인장, 굽힘, 약단, 압축 및 표면특성을 측정하고 태값을 산출하여 비교한 결과는 아래와 같다. 1. 능하부다이 견직물의 경우 조련연감율이 증가와 함께 포의 stiffness는 감소되고 smoothness는 향상되었으나 종합 태값인 soft feeling은 조련 20%에서 가장 우수하였다. 2. 크\ulcorner데신 견직물의 경우 anti-drape stiffness는 조련정도가 커지는데 따라서 증가되었으나 기타 특성과 종합 태값인 Flexibility with soft feeling은 조련정도와 상관이 인정되지 않았다.

• 한국생활과학회지
• /
• 제14권4호
• /
• pp.665-671
• /
• 2005

This study aims to examine the effect of structural properties, subjective textures, sensibilities, and objective handle on the preference for weft knit fabrics, and then to provide useful information in planning and designing knit fabrics through predicting the preference. We made 20 plain knit fabrics, as specimens, with a combination of 5 kinds of wool/rayon fiber contents and 4 kinds of stitch loop length. For the subjective evaluation of textures, sensibilities, and preference, we used the questionnaire that had been developed in the previous study. The data analysis was conducted with Pearson's correlation analysis, ANOVA, Duncann multiple range test and regression analysis. The results are as follows: In relationship of structural properties and preference, we could not recognize any difference in whole ranges of wool/ rayon fiber contents and in 7.5mm and less stitch loop length. On the other hand, we could find the decrease of preference in over 7.5mm stitch loop length. As to subjective textures and sensibilities, a multiple regression analysis of preference indicated a higher determination coefficient by sensibilities than by textures. But there were little correlation between a objective handle and preference of weft knit fabrics.

• 한국생활과학회지
• /
• 제9권1호
• /
• pp.33-45
• /
• 2000

The handle were observed by objective and subjective method as the washing was repeated for 4 kinds(sample A, B, C, D) of materials which have different water vapor transmission, and the change of water vapor transmission each others. The results of factor analyses for 18 polar adjective words on subjective handle test yielded 4 factors, that were 'elastic property', 'surface property', 'thickness and weight property' and 'thermal and rigid property'. The surface properties were deteriorated remarkably as washing was repeated and significant difference were observed. Compared with the primary hand value for each materials, the statistical difference of samples was shown at Koshi and Fukurami measured by the KES-FB system. Koshi decreased for all the materials after repeated washing, and Fukurami had a tendency to increase for all the materials in proportion to repeated washing. Significant difference of total hand value wasn't shown in repeated washing number, but in fabric types.

• 한국정보시스템학회지:정보시스템연구
• /
• 제10권1호
• /
• pp.51-72
• /
• 2001

E-commerce has not only brought about a great change in the way we exchange goods and services but also revolutionized the way we handle business transactions. In addition, it has a significant influence upon the present business structure, and most of firms in service industry as well as manufacturing are considering adopting E-commerce in a serious manner. Most vessels purchase merchandises through a number of shipping agents. As the amount of harbor materials increase, the number of vessels and their navigation frequency also increase. As a result, the amount of procurement for ships has increased. Traditional means such as telephone and fax to handle ever-increasing harbor transaction, however, has proved to be very time-consuming and cost ineffective. Therefore, people are starting to look for more effective ways. In this paper, an internet-based scheme of B2B transaction is proposed to handle procurement problem between shipping agency and shipping company, and between vessel and suppliers as a more effective approach to streamline such problems. We extract problems of shipping agency through task-analysis and present a scheme that performs decision making and procurement as a system agent with brokering structure. Purchaser and supplier are offered material information rapidly and task loads are minimized by the scheme. Also, the system can support decision making of purchasing goods, and information is shared among purchaser, supplier and system through the system interface.

• 한국CDE학회논문집
• /
• 제6권2호
• /
• pp.78-88
• /
• 2001

In order to adopt feature-based parametric modeling, CAD/CAM applications must have a geometric constraint solver that can handle a large set of geometric configurations efficiently and robustly. In this paper, we describe a graph constructive approach to solving geometric constraint problems. Usually, a graph constructive approach is efficient, however it has its limitation in scope; it cannot handle ruler-and-compass non-constructible configurations and under-constrained problems. To overcome these limitations. we propose an algorithm that isolates ruler-and-compass non-constructible configurations from ruler-and-compass constructible configurations and applies numerical calculation methods to solve them separately. This separation can maximize the efficiency and robustness of a geometric constraint solver. Moreover, the solver can handle under-constrained problems by classifying under-constrained subgraphs to simplified cases by applying classification rules. Then, it decides the calculating sequence of geometric entities in each classified case and calculates geometric entities by adding appropriate assumptions or constraints. By extending the clustering types and defining several rules, the proposed approach can overcome limitations of previous graph constructive approaches which makes it possible to develop an efficient and robust geometric constraint solver.