• 항공우주시스템공학회지
• /
• 제12권2호
• /
• pp.59-65
• /
• 2018

항공기 구성품인 착륙장치 핸들은 항공기 이 착륙 시 착륙장치 작동을 위한 핵심적인 장비이다. 착륙장치 핸들의 개발을 위한 진동시험 중 착륙장치 핸들 내부의 브라켓 파손 현상이 발생하였다. 따라서 본 논문에서는 착륙장치 핸들 개발 시 수행한 진동시험 절차와 진동시험 중 발생한 결함사항에 대한 원인 분석, 설계 개선사항 그리고 검증 결과를 함께 기술하였다.

• 감성과학
• /
• 제14권2호
• /
• pp.191-196
• /
• 2011

노즐시험기로 측정되는 직물의 당김 힘은 직물이 갖는 포괄적인 촉감을 나타낸다. 노즐시험기는 기존 KES 시스템보다 저가이며, 측정에 있어서 절차가 간단하고 빠르다. 본 연구에서는 노즐시험기로 측정되는 직물의 촉감을 정량적으로 평가하기 위해 마찰법칙을 기초로 하여 반 실험적 촉감 방정식을 개발하였다. 모델 식에서 고려된 변수들은 직물의 마찰계수, 그리고 직물의 굽힘 길이와 전단 신도에 의해 결정되는 직물의 3차원적 변형 특성을 나타내는 드레이프 계수이다. 12 종류의 서로 다른 물성의 면과 폴리에스터 직물들을 사용하여 실험 측정한 촉감 값과 모델 방정식으로부터 예측한 촉감 값들을 비교 분석하였다. 높은 마찰계수, 높은 굽힘 길이, 그리고 낮은 전단 신도를 갖는 직물일수록 높은 촉감 마찰력, 즉 낮은 촉감 성능을 보여주었다. 실험 측정한 촉감 값과 모델 식으로부터 계산한 값들 사이 잘 일치하였으며, 이와 같은 결과는 모델 식을 사용하여 직물의 고유 물성들로써 촉감의 객관적인 예측이 가능함과 더불어 촉감 성능의 향상을 위한 직물설계에 있어서도 유용한 정보를 제공할 수 있음을 보여준다.

• Journal of Biosystems Engineering
• /
• 제29권2호
• /
• pp.101-108
• /
• 2004

The objectives of this study were to determine the natural frequency of a walking-type cultivator's handle using a modal analysis, to determine whether or not the handle resonates with forcing frequency induced by its engine, and to determine a method to reduce the handle vibration using a technique of the operational deflection shapes(ODS). Results of the study are as follows: The natural frequencies of the handle up to third harmonics were found to be 20.4, 22.5 and 92.1 Hz in the vertical direction and 14.9, 93, and 132 Hz in the horizontal direction. It was found that the handle does not resonate with the forcing frequency of the engine, which is 52 Hz. The operational deflection shape analysis revealed the deflected shapes of the handle in the vertical and horizontal directions and suggested that the handle vibration can be reduced by adding some mass to the place where the largest deflection occurs. Attaching of 1.1 kg mass adjacent to the largely deflected area resulted in reductions of vibration from 9.45 to 8.03 m/s$^2$ in x-axis direction from 3.89 to 3.16 m/s$^2$ in y-axis direction and from 7.89 to 3.09 m/s$^2$ in z-axis direction, which are respectively 15, 19 and 61% reductions. The total vibration level was reduced by 29%, indicating that mass-adding method by the ODS is very effective for reducing the handle vibrations of the cultivators.

• Journal of Biosystems Engineering
• /
• 제31권3호
• /
• pp.139-145
• /
• 2006

A previous study showed that the handle vibration of a walking type cultivator can be reduced by adding a mass to the handle. This study was conducted to determine the optimum magnitude and location of the mass to be added for the same cultivator. The possible locations of added mass were determined by investigating nodal points of the handle vibration by an ODS (operational deflection shapes) test at an engine frequency of 52 Hz. The optimum location was then determined as one that moved the nodal points to the hand grip of the handle bar. To determine the optimum magnitude of the mass, the possible locations were added by a mass from 0.2 to 2.0 kg in an increment of 0.2 kg. The optimum magnitude was then determined as a mass which minimized the vibration level at the hand grip. For the case of this study, the z-axis vibration at the hand grip was reduced from $2.67m/s^2\;to\;0.88m/s^2$ resulting in a reduction of 67% and the total vibration from $4.09m/s^2\;to\;3.27m/s^2$ resulting in a 20% reduction by adding an optimum mass to the optimum location.

• 한국수학사학회지
• /
• 제19권4호
• /
• pp.107-116
• /
• 2006

1930년대 시작한 모-스이론의 발전과정을 조사하고 스메일(Smale), 후리드만(Freedmann) 등이 손잡이체(handle body) 이론으로 포앙카레(Poincare) 예상을 해결한 내용 및 측지선(geodesic) 이론에서 나타난 여러 가지 응용에 대하여 조사하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 춘계학술대회논문집
• /
• pp.146-149
• /
• 2005

Thesedays, the reduction of hand-transmitted vibration of hand-held power tools is important issue for operators' welfare, In the study, frequency response function is measured and vibration total value is evaluated for solving the principle and effect of the BOSCH's vibration-proof handle. This handle functions as a dynamic damper and has the effect, 22% vibration total value reduction under idling condition using a system that consists of a PC with data acquisition system and LabVIEW program. The program in the system makes it possible to evaluate vibration total value according to ISO 5349. This handle offers a good example for figuring out the physical contradiction between the work efficiency and operators' health.

• 소성∙가공
• /
• 제19권3호
• /
• pp.185-190
• /
• 2010

Application of CAE analyses are wide spread in shaping processes and structural safety verification of plastic products. The importance of CAE analysis and its contributions are getting increase since the processibility and structural safety of product can be predicted. CAE analysis for complex shaped product need a lot of time for modeling and computation compare with simpler one. Therefore careful simulation modeling is required for complex shaped product. Structural analysis for plastic door handle of automobile has been performed and structural safety has been investigated for various load directions and modeling cases. Large stress occurred at the hinge in handle regardless of load direction and modeling case. Consequently hinge is considered structurally very weak among the parts in plastic door handle. It is concluded that simple modeling rather than total modeling with adequate boundary condition equivalent to real situation gives reasonable computational results with saving modeling effort and computation time.

• 한국의류학회지
• /
• 제27권1호
• /
• pp.67-77
• /
• 2003

Subjective sensorial experiment was executed with 43 subjects to find the relationships between the sensibility of jacket styles and the handle of wool fabrics. The handle and sensibility of wool fabrics were significantly different according to the wool types, and the handle was defined as two axis of Wild/Exquisite vs. Thin/Thick. The sensibility of jacket styles was different by the types of jacket styles, and the jackets were displayed in the 2D of Masculine/Feminine vs. Country/urban according to the factor analysis using 8 sensibility words. The best-appropriate jacket styles for each wool fabrics were converged into several jacket styles, and it was found that the wool fabrics were divided as for all-purpose or for specific-end usage. For the results of correspondence analysis of the matrix for the best-appropriate jacket style for each wool fabric, the jacket styles and wool fabrics together were grouped as 4: Striking and Yang, Striking and Yin, Plain and Yang, Plain and Yin.

• 한국의류산업학회지
• /
• 제16권2호
• /
• pp.312-318
• /
• 2014

This study examined the correlation between a handle evaluation of cosmetic puff textile and a sensory evaluation. The KES-F system was used to analyze the main mechanical factors for the handle evaluation and a statistical method was used for the sensory evaluation. The results revealed different mechanical properties and handle values of the tested cosmetic puff textiles. A material type and structure of the cosmetic textile affected the handle property of the material which is the most important factor for a cosmetic purpose. Particularly, the physical properties of textile material are likely to be important factors for the sensory property of cosmetic material. In addition, the sensory evaluation also revealed different sensory characteristics of the cosmetic efficiency according to the cosmetic puff textile. No close relationship was observed between the mechanical properties and sensory evaluation on the cosmetic puff textiles. The sensory evaluation of a cosmetic efficiency is not only decided by the physical and mechanical characteristics of the cosmetic textile material. Overall, when using textiles used for the cosmetic purposes, it is important to consider not only the proper mechanical properties of the textiles but also the use and sensory satisfaction. Development and selection of the cosmetic textiles should be focused on both the material function and consumer satisfaction.

• 한국안전학회지
• /
• 제18권2호
• /
• pp.119-124
• /
• 2003

Despite rapid technological advance and increased automation facilities, many jobs and activities in our living require manual materials handling(MMH). These include wide variety of activities such as moving things, lifting bags. boxes or cartons, etc. Many studies found that handle could affect on maximum acceptable weight of lifting, but there were few studies f3r the effects of work posture and coupling in lifting tote box. This study performed that ten male college students were required to lift a tote box with and without handle for three postures (bending, straight, right angle posture). From the experiment, following results were obtained. (1) MVC reduced maximum 23% by type of handle. (2) MVC was highest in straight posture, but was lowest in right angle posture. (3) As a result of ANOVA, MVC paid attention to posture and coupling. (p<0.01) (4) To all handle types, biceps brachii activity was increased in right angle posture. but reduced in straight posture. (5) To all posture, biceps brachii activity was most lively in no handle. The results of MVC measurement, subjective rating, EMG analysis, statistic analysis showed that maximum acceptable weight of lifting was influenced by type of handle and straight posture was more comfortable than other postures. Based on these results, it was concluded that acceptable weight of lifting has to differ for work posture and coupling.