• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2009년 춘계학술대회논문집
• /
• pp.121-124
• /
• 2009

A moving mesh system is one of the critical parts in a computational fluid dynamics analysis. In this study, the RBF(Radial Basis Function) which shows better performance than hybrid meshes was developed to obtain the deformed grid. The RBF method can handle large mesh deformations caused by translations, rotations and deformations, both for 2D and 3D meshes. Another advantage of the method is that it can handle both structured and unstructured grids with ease. The method uses a volume spline technique to compute the deformation of block vertices and block edges, and deformed shape.

• 터널과지하공간
• /
• 제7권1호
• /
• pp.1-12
• /
• 1997

Engineering rock mass classification is extensively used to determine the reasonable support system throughout the tunneling process in the field. Selection of support system based on the results of engineering rock mass classification is simple and straight-forward. However, this method cannot consider the effect of in-situ stresses, mechanical properties of support material, and support installation time on the behavior or rock-support system To handle the various conditions encountered in the underground excavation sites rock-support system. To handle the various conditions encountered in th eunderground excavation sites rock-support interaction program has been developed. This program can analyze the interaction between rock mass and support materials and also can simulate the tunnel excavation-support insstallation process by controlling the support installation time and the stiffness of support system. Practical applicability of this program was verfied by comparing the results of support design to those from rock mass classification for virtual underground excavation at the drilling site KD-06 in Geoje island.

• 대한가정학회지
• /
• 제33권5호
• /
• pp.89.2-98
• /
• 1995

This study examined whether specific coping strategies for the university entrance examination stress are related to high school seniors' depression and whether these strategies moderate the relationship between additional life event stress and depression. A sample of 358 high school seniors reported their level of additional life event stress, coping strategies they were using to handle examination stress, and their levels of depression. Problem-focused coping strategies and affective-regulation coping strategies were found to be related to reduction in depression. And, coping with examination stress was found to be related to depression independent of the level of additional life event stress.

• 한국생산제조학회지
• /
• 제8권5호
• /
• pp.30-35
• /
• 1999

Since LPG has a higher octane number and a lower maximum combustion temperature than gasoline it is getting more popular for reducing emissions from the vehicle This paper when an LPG engine works in the range of idle analyzed the operating range preciously an provides reducing method of emissions for the LPG engine. An electronic control unit(ECU) for the LPG engine using a feedback mixer is presented. The ECU is built by using a microcontroller MC68HC05. A PI-controller is imple-mented in the ECU in order to handle to handle Air/Fuel ration control. The experimental results exhibit that the required engine performance are satisfied at idle.

• 패션비즈니스
• /
• 제8권1호
• /
• pp.156-163
• /
• 2004

The purpose of this study is to investigate the change of handle when cotton fabric is treated with chitosan-polyurethane mixed solution and crosslinked with epichlorohydrin in order to form three-dimensional crosslinks in the molecules, which in turn would improve the wash-fastness of the chitosan-treated fabrics. The application of epichlorohydrin decreased the EM(Tensile extensibility) and WT(Tensile energy) values, indicating the stiffness increased in the treated fabrics due to the 3-dimensional crosslinking. The crosslinking of the cotton fabric samples resulted in the increase in T.H.V. effectively for the use of summer dress shirt fabric.

• 한국염색가공학회지
• /
• 제8권6호
• /
• pp.47-54
• /
• 1996

In order to develop the air flow finishing machine with low tension drying and surface modification by high impact effect, the treatment characteristics and the moving speed of fabrics was analysed and investigated in the newly developed system. The change of handle before and after treatment of fabrics measured using Kawabata system. The moving speed in air nozzle was affected by an air pressure of blower, and the maximum value was 1,000 m/min. In accordance with the change of handle, the treatment effect was very different compared with untreated fabrics. And the drape properties of fabrics increased about 10∼45% compared with untreated one.

• Agricultural and Biosystems Engineering
• /
• 제1권1호
• /
• pp.54-58
• /
• 2000

In order to investigate the compost process and the evaporating phenomenon, a rotary reversing compost system has been tested in a swine farm. During the summer season, the compost temperature was varied in the range of 50~$60^{\circ}C.$ and the ash content was increased by 12.8 % with the average of 24.7 % at the end of phase. In the winter season, the compost temperature was varied in the range of 40~$57^{\circ}C.$ and the ash content was increased to 8.5 % showing the average of 18 % at the end of phase. In summer, the compost facility could handle all of the animal waste, but it could not handle 1/4~1/3 of the animal excrement during the winter. The required amount of sawdust by this method could be reduced to 1/3 than that of the mixing method at the beginning of compost process.

• 한국환경보건학회지
• /
• 제30권5호
• /
• pp.374-377
• /
• 2004

Dual actions are the most recently used delivery system in drug study. Dual-action agents are unique chemical entities comprised of two different type of antibacterial compounds covalently linked together in a single molecule in such a way that both components are able to exert their bactericidal properties. Crosslinked sulfadiazine-sulfanilamide such as antibiotics is synthesized by synthetic handle with glutaraldehyde. As a result, New synthetic antibacterial agent exhibited the broad antibacterial activities against Gram(+) and Gram(-) of 4 strains and a long durability supposing that the stomach and blood.

• 산업공학
• /
• 제16권4호
• /
• pp.515-525
• /
• 2003

In this study, a prototype liquid container combined with auxiliary handles was designed to increase the safety of manual handling and protect from contamination of hands of people who use these containers. Likert summated rating method as well as pairwise ranking test was applied to evaluate the user preferences for provided handles of the container under the conditions of different shapes and positions. The results show that the subjects preferred perpendicular orientation of the handle on the top of the liquid container while carrying the containers and the crosswise position of the handle at the side of the container while pouring the liquid were preferred. A prototype liquid container with provided auxiliary handles was developed based on the results of evaluation. It is thus recommended that the liquid container provide extra handles to reduce the musculoskeletal stress and in turn to increase the user satisfaction.

• 산업공학
• /
• 제17권1호
• /
• pp.104-112
• /
• 2004

The purposes of the study were twofold: to investigate the stereotype of position and direction that the users expect when operating the handles of a water faucet in different directions, and to collect information about user’s preferred directions. Six hundred subjects, aged from teens to over sixties, participated in the experiment with the procedure of showing them actual water faucets of a lever-type handle and two round-shaped handles mounted on the sink(horizontal plane) and wall(vertical plane). The water faucets presented to the subjects were most widely used devices in our living environment. The results showed that when the handle of the lever-type water faucet was in the 'up' position, 63% of the subjects expected the device was 'open'. When the cold hot separated water faucets were mounted on the horizontal or vertical plane, over 50% of those who answered the 'open' direction of round type handles responded as 'counter clockwise' for a 'hot' water faucet and 'clockwise' for a 'cold' water faucet. In conclusion, this study suggests that water faucet devices be designed and installed in the way that the users expect them to operate.